Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,408 bracket jobs found, pricing in USD

    Good day, I need this exhaust hanger bracket on a motorcycle made in carbon fibre drawn in Solidworks, or suitable for the toolmaker to machine a mould or 3d print in order to make a female of it in polyester.

    $91 (Avg Bid)
    $91 Avg Bid
    29 bids

    ...Copenhagen Lower Final. The winner of the sport will go up towards Paper Rex day after today to struggle it out for the trophy. *OpTic Gaming and FunPlus Phoenix: Who may be the second one Grand Finalist of the VCT Stage 2 Masters Copenhagen?* OpTic Gaming was greatly surprised with the aid of Paper Rex's overall performance last night time and turned into sent all the way down to the Lower Bracket. The North American facet will need to win modern day Lower Final sport to get the chance to shield their identify day after today. They will be going through EMEA's FunPlus Phoenix this night, who knocked out tournament-favored Fnatic last night time to live inside the opposition. OpTic Gaming and FunPlus Phoenix will play a fine-of-5 series this night within the VCT Stag...

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    4 bids
    $40 Avg Bid
    1 bids

    ...harness electricity and store electricity with no greenhouse gases or environmental waste. We have fully operational prototypes. A crowd fund will assist us to commercialise our prototypes, gain public awareness and industry support. I need information such as which crowd fund platform offers best deal and which platform would suit us best. I want to provide an initial offering for any income bracket. We have several functional prototypes. Exponential growth market. The initial deal will be to setup the crowd fund, however a further commission can be obtained on the success of the crowd fund (by percentage up to £10'000). Ideal person needs to have been involved in successful campaigns in the past. Needs to have skills in producing: Pitch Deck Video creation Cam...

    $24 - $303
    Urgent Sealed
    $24 - $303
    4 bids

    Hi! I am looking for an FEA expert to perform the analysis on a bracket. I would like to know the maximum stress and deformation on the part when a 100 kg load is applied to the bracket. I will provide additional information upon request. Looking forward to hearing from you! Thank you.

    $105 (Avg Bid)
    $105 Avg Bid
    63 bids

    I can use "Solidworks" for 2D/3D modeling and finite element analysis.

    $24 (Avg Bid)
    $24 Avg Bid
    1 bids

    The attached exhibits are screenshots of the Ubuntu text editor/debugger on my server. Exhibit 1 shows in the bottom left of the screenshot "Bracket match is out of range". Exhibit 2 shows in the bottom left of the screenshot that the bracket match is within range if I delete a single character from line 115. Is it possible to change a setting in the C++ compiler to say 15,000 characters for the bracket range? I really don't what to increase the the number of external functions if at all possible as this will make the original code (not attached) very difficult if not impossible to understand. If you know the solution please let me know how much would you charge for it?

    $332 (Avg Bid)
    $332 Avg Bid
    7 bids

    Need a bracket design in FreeCAD and later STEP files to provide factory ability to do moulding injection production of that bracket

    $105 (Avg Bid)
    $105 Avg Bid
    28 bids

    I need to figure out a formula that has "AND" and "OR" arguments. I have been unsuccessful in just using a "COUNTIFS" formula with an array bracket nested in it but I feel like I'm fairly close but, then again, maybe I'm not! I need some help, trying to solve this today. The formula needs to filter on a date range(in between two dates), multiple statuses, and one other criteria. I created a TEST sheet that doesn't provide all the data, just enough to hopefully get the formula correct. =COUNTIFS(Data!A:A,"{"Interviewing","Submitted","Candidate Declined","Contacted"}",Data!B:B,"Ads",Data!F:F"=>"B7,Data!F:F,"

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    28 bids

    We need to calculate the Levenshtein distance with the R package stringdist. However, we have the problem that we do not get a result, but a + appears in the console after entering the command. We have already looked to see if we have forgotten a bracket or something similar, but this is not the case. If we calculate each sentence separately, the calculation works. However, if we add the whole text to the command, the + appears in the console. We require help to get the command to work.

    $138 (Avg Bid)
    $138 Avg Bid
    22 bids

    ...the start and destination, and print the route if the distance of the path is equal or less than the maximum allowed travel time. Input Format: Input is read from standard input and has the following characteristics: It is two lines; the first line describes the edges of the graph o Each edge is formatted as an opening bracket '[', the first node of the pair, a comma, the second node in the pair, another comma, the distance between the nodes, followed by a closing bracket ']'. Example: '[A,B,5]. the second line describes the start and destination node, as well as the maximum allowed travel time the starting node, followed by an ascii arrow '->(two characters), the destination node, a comma, and the maximum allowed travel time. Example &...

    $158 (Avg Bid)
    $158 Avg Bid
    13 bids

    I want to put as footnotes, references within a Word file containing 20000 words, that are already noted with brackets. The file is written in Greek, but we care only about the correct insertion of footnotes.

    $26 (Avg Bid)
    $26 Avg Bid
    59 bids

    Hi, I need to make a motor bracket support that allow to hold the motor on my e-bike carbon frame. I do not have a design yet but I can show pics about the idea.. I can bring the bike and the motor to London to design and make a bracket for it. On

    $136 (Avg Bid)
    $136 Avg Bid
    9 bids

    Hi, I need to make a motor bracket support that allow to hold the motor on my e-bike carbon frame. I do not have a design yet but I can show pics about the idea.. I can bring the bike and the motor to London to design and make a bracket for it.

    $177 (Avg Bid)
    $177 Avg Bid
    2 bids

    We need someone to develop either a VB.Net or Python application using the Interactive Brokers API. Calculating RSI on an underlying price at different intervals then assessing options pricing and building options combinations ready for submitting. An understanding of the different order types and attaching bracket orders will be required.

    $352 (Avg Bid)
    $352 Avg Bid
    10 bids

    I'm looking for someone with attention to detail to draw up four AutoCAD drawings of brackets that will be used by an aluminum extrusion company to make brackets for my project. I have *.DXF and *.DWG files that were made in Adobe Illustrator and exported for AutoCAD of the four different bracket profiles. Each bracket has a different angle, please make sure you label the files correctly of each angle, BracketA949, BracketB1102, BracketC1216 and BracketD1274. Please use the files and the information included in the PDF file to create Brackets A, B, C and D. Kind Regards, Kevin

    $123 (Avg Bid)
    $123 Avg Bid
    27 bids

    First task : i need you to redo this logo completely from scratch to make pixel and quality enchantment. And i need you to make the " U " and " i " letter in the word " Solutions " thick same exactly as the other letters " s, o, L, n ". and i need you to change the " t " color in solutions same as the bracket and slash color theme. And the second task included : 2 more logo redesign from your own creativity

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    1 bids

    ...tournament manager where users can create tournaments. - League table (no limits) - Group stage (unlimited) - Tournament keys (unlimited) The registration will have the following fields: - User name - - Password - Country - Captcha As you create your tournament, you will be able to register the following options. - Choose whether it will be a league table tournament, group stage or elimination bracket tournament (individual or team). - Tournament name - Tournament description - Tournament image - Tournament date - Creation of the players: Name or User / Nationality - Creation of teams: Team name / Nationality - Name of the game (a list will be displayed with all the games that have been previously added). When the user has completed the data for the creation of the tournament,...

    $77 (Avg Bid)
    $77 Avg Bid
    9 bids

    Patten pending using an existing selfie stick modified to have a second bracked. The upper bracket/clamp holds a moistire meter, and the lower one clamp holds the cell phone in camera mode to take pictures of the readings on the mositure meter.

    $329 (Avg Bid)
    $329 Avg Bid
    21 bids

    Hello, I'm in need of an eSports Bracket Tournament Script for a new site I'm building. The following sites are examples of other ladder/tournament sites so you can see what needs to be done (basically I'm building a site just like these): My max budget for this is around $250(USD) so please give me your best offer, time span and some examples of your script work. Terms etc: I will have full rights to this script after payment The script should either be in php/ wordpress If you need any more information please ask also find attached image for your reference Kind Regards,

    $217 (Avg Bid)
    $217 Avg Bid
    5 bids

    Looking for someone with experience in TOS scripting , someone who already wrote successfully few algorithms in thinkscript editor, for automated entry bracket with few conditions/ triggers for entry and exit trading positions

    $216 (Avg Bid)
    $216 Avg Bid
    8 bids

    Need to design a secondary adapter for a FSA bb30 bottom bracket adapter to tightly fit a Bafang bbshd electric motor

    $98 (Avg Bid)
    $98 Avg Bid
    30 bids

    Are you familiar with thinkscript? On thinkorswim platform?,I would like to automated my exits in oco bracket section using a script to add 5 more conditions to automatically exit if some price movement will acquire?

    $186 (Avg Bid)
    $186 Avg Bid
    8 bids

    Looking for someone with experience in TOS scripting , someone who already wrote successfully few algorithms in thinkscript editor, for automated entry bracket with few conditions/ triggers for entry and exit trading positions

    $203 (Avg Bid)
    $203 Avg Bid
    8 bids

    Hi Deepak G., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $150 (Avg Bid)
    $150 Avg Bid
    1 bids

    speaker bracket for boat tower

    $27 (Avg Bid)
    $27 Avg Bid
    18 bids

    Ready to showcase your fun and out of the box writing style to the world? Then this is the project for you! We are a support group & services for pregnant & new mothers across India. We intend to transform the pregnancy & postpartum experience for mothers through range of specialised services and workshops Our target audience is in the tier-2 & tier-3 cities in the age bracket of 20-40 years and we’ve already been providing them with support for the last one year. Now we’re looking to grow our reach on online platforms for our target audience in a time-bound and phased manner. We’re looking for an experienced and enthusiastic candidate who has an idea of the niche we’re working in and can help us grow organically and through ads. We also n...

    $264 (Avg Bid)
    $264 Avg Bid
    19 bids

    Our bracket orders aren't working properly (SL and TP). Getting the entry price would solve this.

    $45 (Avg Bid)
    $45 Avg Bid
    13 bids

    I am looking for someone to make me the two parts shown in the attached drawing. Note that "make" means make as in manufacture, not just model. Note that the quantity is just one of each of the two pieces shown.

    $62 (Avg Bid)
    $62 Avg Bid
    19 bids

    We need the design of our housing modified slightly in the following plans: • Kenworth Cabin Air Filter Assembly Top • Kenworth Cabin Air Filter Assembly Left Side Plate • Kenworth Cabin Air Filter Assembly Bottom and Outlet Side • Kenworth Cabin Air Filter Assembly Filter Box Assembly page 1 of 2 • Kenworth Cabin Air Filter Assembly Mounting Bracket 2 • Kenworth Cabin Air Filter Assembly Mounting Bracket 4 The existing models are SolidWorks 2021. We need the finished files to include SolidWorks models, PDF drawings, and DXF Drawings. We have included a packet of the hand-drawn notes of each drawing that needs alterations, as well as all DXF, STEP, and PDF files we currently have on this housing. Here are the changes we need to the files listed...

    $150 (Avg Bid)
    $150 Avg Bid
    40 bids

    The outcome of this project is to prepare a dynamic (linked) XLS fil...website - see Extract 2 - Upload file - attached for example. Notes: 1. For each Product the tier pricing should be associated with the configured Products to include the Product colour and size variations as available on our website. Example of the product variations for configurable products can be seen in Extract 2 - Upload file. 2. For all tier pricing where the price is constant from one qty bracket to another, the tier needs to be eliminated from the upload file. For example if qty 5 pricing = qty 10 pricing for any product, the qty 10 pricing should NOT be included in the upload file. This project is to setup the file for a selection of 1 Brand of Products represented on our website only which requires...

    $125 (Avg Bid)
    $125 Avg Bid
    7 bids

    ... laser cut sides(aprons), the bending of the legs into uniform question mark shapes ( 19mm x 10mm from steel lengths, 17 holes to be drilled and accurately spaced in each of the four legs to house 6mm connecting rods around the top arch and finishing a measurement above the floor. The completed two pairs of legs and connecting rods are permanently attached between the side ends . Four small bracket plates attached for table top fixing. Four small rectangular plates attached for feet. A spoked (3mm spokes) insert in a curved frame is inserted into each of the legs top main arch. I have several totally blacksmithed examples of this table with two jigs used to bend the legs and the insert frame. These can be supplied if needed. Professional drawings of all components will be suppl...

    $943 - $1885
    Local
    $943 - $1885
    0 bids

    We need the design of two brackets modified slightly. The existing models are SolidWorks 2021. We need the finished files to include SolidWorks models, PDF drawings, and DXF Drawings. Here are the modifications we require: PART#1376272-Add 4 inches to lower formed portion for a total of 15.5 inches. Add another Slot to lower portion. Extend slots to fit in extended 4 inch lower portion. Reduce over all length to 7.99 inches. Lower formed leg should be 4.91 inches. Part#1376262 Changes- Shorten formed leg to 4.4. Shorten Overall length to 16.45. We need these files in PDF, DXF and SLDPRT format.

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    25 bids

    ...tournament manager where users can create tournaments. - League table (no limits) - Group stage (unlimited) - Tournament keys (unlimited) The registration will have the following fields: - User name - - Password - Country - Captcha As you create your tournament, you will be able to register the following options. - Choose whether it will be a league table tournament, group stage or elimination bracket tournament (individual or team). - Tournament name - Tournament description - Tournament image - Tournament date - Creation of the players: Name or User / Nationality - Creation of teams: Team name / Nationality - Name of the game (a list will be displayed with all the games that have been previously added). When the user has completed the data for the creation of the tournamen...

    $160 (Avg Bid)
    $160 Avg Bid
    9 bids

    Hi, I'm wanting a simple bracket drawn up that holds a LEVEL in the center. See images attached. Will provide exact measurements etc to the person i am going with. Thanks Tristan

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    73 bids

    We are a luxury pyjama clothing brand. Our pyjama's are created mainly f...We are a luxury pyjama and lounge wear brand, that you can wear from the bedroom to the boardroom. Created for the Gen Z to Millenial age bracket of 18-35. Bold, sexy and boujee. Lots of animal prints, blacks, golds and bold colours. Neutrals aren't really our style. (Boujee fashion is very extravagant, over-the-top, and flashy, with huge name brands being very popular, such as Hermes, Gucci, Chanel, Armani, Alexander McQueen, Louis Vuitton, Dior, Cartier, etc.) Our company name is - "Bourbon St". We are looking for a logo and an Icon to use for a clothing label. Looking for a style that is modern and fresh to attract the particular age bracket and style. Happy to to wo...

    $103 (Avg Bid)
    Guaranteed
    $103
    491 entries

    Hi all, I am re-posting this because my last call lacked detail. I am an academic based in a UK university, with a PhD from Cambridge, working here for over ten years. I have written and published many academic articles (and a CUP book) in English, but...light touch from a native speaker is all that is needed. The article is in political philosophy and over 11300 word long. However, over 1700 words are used for the footnotes, which are almost exclusively made up of references, which you will not need to check. The Freelancer website will ask me to signal a price bracket, and I will choose £20-£250. Anyway, given the sort of check that I am asking for, I will only consider offers that are *really* close to the lower end of that bracket. For example, £100 bi...

    $104 (Avg Bid)
    $104 Avg Bid
    91 bids

    I would like to create a code in Python that allows to go though multiple stocks(about 20) live data for which is obtained from Interactive Brokers or any other platform, and based on criteria such as volume, bid/ask spread, target price the stock is being bought. Together with the buy order a bracket order of SL and TP needs to be sent of OCA type. After the order is placed the position needs to be monitored in case volume drops in which case the stock is sold

    $543 (Avg Bid)
    $543 Avg Bid
    22 bids

    We have an app development agency, AppJox, and we are looking for a sales team for generating new leads. We take projects in the range of $30k-60k so for every project that comes from you we will be willing to pay a good commision. We are offering superior quality at a low price bracket so chances of landing a client is on the higher end. For more information check out our website at Bonus:- Get 5 Clients in a month and get your $5000/month job at our company. (Optional)

    $762 (Avg Bid)
    $762 Avg Bid
    3 bids

    I have had some cad work done. And have hard engender stamped drawing of a 1st proto type of bracket. This would be a 2nd version of my 1st design. I.E. modified. My modification are hand drawn. Nothing crazy. Just need redrawn with my mods.

    $125 (Avg Bid)
    $125 Avg Bid
    51 bids

    ...gonna hate Fighters gonna fight Freeloaders gonna take And still say it ain’t right. I’m droppin the baggage-- Let Karma go savage! Get on board or step aside - Best buckle up For the mother fuckin ride!! To all the impedance-- The meter’s been tickin Karma waits and you’ll be wishin’ You didn’t mess with my coat Or my jacket Because it just may affect Your concerning tax bracket. Betrayal fuels me! Lies were cruel to me! No more fools for me! Chorus: Haters gonna hate Fighters gonna fight Freeloaders gonna take And still say it ain’t right. I’m droppin the baggage-- Let Karma go savage! Get on board or step aside - Best buckle up For the mother fuckin ride!! Get on board or step aside - ...

    $300 (Avg Bid)
    Guaranteed
    $300
    8 entries

    i would like somebody to make a pretty simple average volume comparison indicator in pynescript for tradingview. In wich you put in a string of simbols in one bracket and a string in the other and it compares the average volumes between the two strings of simbols. preferably would like to see it in an oscilator type of way.

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    3 bids

    Refurbishing a 1990 285 Mako, adding an outboard motor bracket, twin 300 hp 4-stroke outboards, replacing the 300 gal fuel tank, adding a head. Just asking for guidance to ensure proper weight and balance is accomplished. Thank you.

    $1162 (Avg Bid)
    $1162 Avg Bid
    2 bids

    I need to know how many of this item is sold in the uk, it’s a galvanised steel rise and fall gutter bracket

    $138 (Avg Bid)
    $138 Avg Bid
    42 bids

    I need a design with calculation sheet like those photos , which is the minimum economic bracket mild steel to carry load 3 ton, bracket radius 0.8m

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    15 bids

    ...(single or double elimination). Single elimination needs to limit up to 128 teams and double elimination needs to limit up to 64 teams. 2) Once the number of teams is entered a bracket is created (single or double elimination). 3) Allow games to be dropped and dragged so that teams can be switched to different brackets. 4) Game numbers should be shown. 5) Enter the score for each team and the team with the highest score auto advances to the next game. 6) Scores should be shown on the brackets once entered. Enter the number of teams playing, select the type of bracket needed (single or double elimination) create a bracket. Allow teams to to be moved around the brackets. As games are played I want to enter the scores and the winner is automatically moved to t...

    $719 (Avg Bid)
    $719 Avg Bid
    13 bids

    Your task is optimizing a bracket, see dimensions in attached file, Soft form of bracket is also attached separately in the attachment. The bracket is massively over-dimensioned and it is your task to make it as light as possible. Starting weight is 8,2 kilo. It is mounted on a stiff plate on the bottom surface and 4 M10 bolts are tightening it, the tightening force you have to look up in a suitable table. We have 2 static forces (20KN) acting on the top of the bracket, see picture below. You are allowed to remove any material not necessary for the purpose of the bracket. How would you reason for a suitable choice of lightweight material and the design of a new lighter bracket? The digital file is available as a step file. It is up to you and you...

    $147 (Avg Bid)
    $147 Avg Bid
    18 bids

    Understanding the skin care market in India: Key points mentioned below: • Feasibility study • Size of the market • Market drivers for demand • Supply drivers • Key demographics and target audience • Sales in the last 5 years by key demographics and key markets across India • Requirements and scalability issues to enter new markets such as UK and USA • Market ...benchmarking (Ratios and key Financial line items for 5 comparable skincare products) – details on key ratios specifics to be provided at a later stage • Detailed case study of a premium brand skin care product vs Mid market and Affordable market product. Understanding complete cycle from launch, marketing channels and sales channels • Recommendation based on quantitative ana...

    $511 (Avg Bid)
    $511 Avg Bid
    39 bids

    I'm looking for a 3D brackets library. Dental braces manufacturers post 3D libraries of their brackets online, however I've not been able to find them. You can check out the whole list here: Any file of these 3D models works for me.

    $507 (Avg Bid)
    Featured Urgent
    $507 Avg Bid
    7 bids

    I need brackets for my new Wyze cameras. I do not want to make them from wood, as they are for outdoor use. I want to be able to print them on my 3D printer. I don't need anything special, just a simple "L" shape with the upper platform having a small lip to ensure the cameras do not slip or fall off in wind. Also three holes for screws to mount the bracket. The cameras are small: 2.3 inch x 2.3 inch x 2.8 inch, and weigh only 9.8 oz.

    $26 (Avg Bid)
    $26 Avg Bid
    9 bids

    Top bracket Community Articles