Bsd robotics jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    3,450 bsd robotics jobs found, pricing in USD

    Sir I can mad robotics cat

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    1 bids

    Modular low-cost smart system for precision agriculture on peatland through integration and adaptation of existing technologies in unmanned ground vehicle and IoT for autonomous applications of fertiliser and pesticidefor oil palm and pineapple plantations. The concept of precision farming includes site-specific or prescription management where the large plantation is divided into smaller land un...

    $425 (Avg Bid)
    $425 Avg Bid
    2 bids

    Must have good hands on v-rep software ,must know How to simulate projects in V-rep.

    $75 (Avg Bid)
    $75 Avg Bid
    2 bids

    Hello Do you have experience in CX programming and robotics? Please apply if you have the required expertise.

    $54 (Avg Bid)
    $54 Avg Bid
    1 bids

    Need electrical telecommunications and robotics engineer. Design elementary engineering toys.

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    6 bids

    Looking for someone experienced in OpenSpan or Pega Robotics who train with a simple Use Case including installing the free version, configure and develop a Use case end-to-end.

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    3 bids

    Full Stack Developer – “MERN stack” - Project based contract Web interface for our UGV that allows for - Reading onboard sensors and visualization - Robot control (will cooperate with our robotics engineer for exchanging commands) - Building indoor map - editor for the acquired map - refining the map , defining areas , missions - user authentication check these videos for r...

    $575 (Avg Bid)
    $575 Avg Bid
    27 bids
    Content work 3 days left

    Hello, am a web developer and I need a content writer to some content for my newly open robotics engineering branch in Texas. I’ll fill you in on the details. My budget is low so only people who can accept should. Please I don’t want any waste of time I just want my work done deceit.

    $18 (Avg Bid)
    $18 Avg Bid
    4 bids

    write report for control systems and solve problem

    $24 (Avg Bid)
    $24 Avg Bid
    5 bids

    I need a designer who can partner with me to develop robotics tool list like the Micro:bit, we would sell and franchise the products across markets in Africa.

    $1925 (Avg Bid)
    $1925 Avg Bid
    4 bids

    I am searching for someone with an abundance of knowledge with robotics coding, prototyping and PCB's to work on a project for my company the project is a wifi dosing pump using stepper motors instead of standard dc motors and be controllable using the device and via phone application. I can send pictures upon request can also google dosing pumps for more info

    $137 (Avg Bid)
    $137 Avg Bid
    13 bids

    We Engage Teachers And Students In High Quality, Hands-On STEM (Science, Technology, Engineering And Math) And Maker Learning Experiences, Using CBSE-Mapped Curriculum As A Base. These Labs Include Building Through Making,Design Thinking And Innovation. Junior STEM Lab: Grades 1-5th Senior STEM Lab: Grades 6th-12th Tech Clubs Today's Tech Savvy Students Not Only Want To Learn The Application ...

    $93 (Avg Bid)
    $93 Avg Bid
    3 bids

    We are a Robotics Company who have very diverged way of Training courses for all age Group Students. We need Digital Marketing Free Lancer to do 1. Lead Generation Campaigns 2. Sell our Online Pre recorded Session with best ROI 3. Maintain Social Media Platforms 4. Engage as much as possible with Indian Students for various types of Ads Like Traffic Building, Lead Gen , Funnels etc. 5. Should have...

    $135 (Avg Bid)
    $135 Avg Bid
    4 bids

    We are hiring a frontend dev who is experienced with React and Electron, can work autonomously, and who can work fulltime hours at least until the job is done. He would be responsible for using the HTML and CSS we provide them to create a new client, including updating our client side libraries to work with that new client Required skills: HTTP, TLS, browser fingerprinting (mandatory) MERN (and no...

    $1117 (Avg Bid)
    $1117 Avg Bid
    23 bids

    We are from an IT consulting firm and an online tutoring company One of our client needs assistance in ROBOTICS AND PYTHON report writing

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    3 bids

    We are from an IT consulting firm and an online tutoring company One of our client needs assistance in ROBOTICS AND PYTHON report writing

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    5 bids

    Mechanical metamaterials are manmade materials, usually fashioned from repeating units, which are engineered to achieve extreme mechanical properties, often beyond those found in most natural materials. In this project, the student will use the lens of mechanics of materials to generate material concepts for soft robotics. Additive manufacturing techniques will be employed to fabricate prototypes ...

    $1097 (Avg Bid)
    $1097 Avg Bid
    15 bids

    I have project as questions in robotics to answer it in 24 hours

    $26 (Avg Bid)
    $26 Avg Bid
    6 bids

    need help with matlab robotics? [login to view URL] [login to view URL] we are not interested in report mainly to get coding to work and maybe half page report its more coding interested in and have starter code

    $80 (Avg Bid)
    $80 Avg Bid
    10 bids

    We are children education based company conducting classes in robotics and Science, Technology, Engineering and Mathematics (STEM) in Malaysia. Our main core business is to conduct physical robotic and STEM classes for 5 yo to 17 yo children. We already have website running since three years ago built on wordpress themify builder. We need to revamp the website to give fresh look and attract more c...

    $317 (Avg Bid)
    $317 Avg Bid
    45 bids

    Our company develops a research project in AI and robotics and we need some external help. We need programmer(s) specialised in computer vision for robotics, 3d object identification, bin picking.

    $4537 (Avg Bid)
    $4537 Avg Bid
    26 bids

    Hi, we are looking for a tutor who has both game development + robotics teaching expertise. We have two 11-years-old kids who will be learning these skills. The tutor should be experienced in the field and a native speaker of English Language. We want to hire someone for a long-term basis. Please share your hourly and course-based rates also. Thanks.

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    9 bids

    We need a logo for a new LLC that we've started. The company is called Gulf Stream Restaurants and Technologies (GSR&T) We are business that primarily helps restaurants franchise themselves. We also license technologies such as robotics, facial recognition, electronic payment systems, and other such technologies that allow for touchless, frictionless interactions in a post-covid world.

    $320 (Avg Bid)
    $320 Avg Bid
    149 bids

    1. Introduction Planys Technologies is an IIT Madras incubated start-up company which provides robotic inspection and survey solutions through indigenously developed technologies. The company has a rich experience of 5 years in the field of robotics and it aims to cover the whole breadth of automated inspection solutions starting from customized design and fabrication of robotic platforms to integ...

    $7 / hr (Avg Bid)
    $7 / hr Avg Bid
    3 bids

    We need someone to help us moving some products in Krefeld Germany next week (probably 20th afternoon). The job might take about one or two hours. If you are interested in the job, please let us know how much you will charge per hour. Many thanks! Best regards, Xiaomei Huang from August Robotics

    $102 / hr (Avg Bid)
    Local
    $102 / hr Avg Bid
    1 bids

    My name is Lee Schulte a local airbrush artist who works on oversized canvases .I would like to develop a motorized easel that can move a canvas , (3ft h by 5 ft w) vertically up and down and to be able to rotate left and right via a wireless footswitch so as to reach all the surfaces of the canvas while standing on the ground.......I have purchased some components like two different rotating pos...

    $417 (Avg Bid)
    $417 Avg Bid
    17 bids

    Need a mechatronics engineer to design a drone station with robotics feature and IoT system

    $798 (Avg Bid)
    $798 Avg Bid
    13 bids

    Need a robotics and drone engineer with machine Learning experience to work in autonomous drone solution with many details from scratch to production.

    $792 (Avg Bid)
    $792 Avg Bid
    16 bids

    Looking for a Robotics Engineer that can help built a product that can rotate and automatically clean a surface with precision.

    $608 (Avg Bid)
    $608 Avg Bid
    16 bids

    I'm a musician & composer looking to build a cymbal-roll robot to automate the process of recording cymbal rolls in fine degrees of loudness with the end goal of producing a highly usable sample library. The recording and production of the sample library is my thing, but where i'm stuck is in the creation of a robot that can be a) super-quiet, b) capable of holding any pair of drum-...

    $1581 (Avg Bid)
    $1581 Avg Bid
    6 bids

    Hi, I am looking for a proficient English writer, who is good at writing scientific paper/journal papers/research papers, to help me write part of my literature review. I have a lot of work, however, I will only give more work if you satisfy me with the quality of your research writing work you will initially do for me. The initial task is to write on, Main Headings: 1. Rehabilitation Therapi...

    $46 (Avg Bid)
    $46 Avg Bid
    40 bids

    I need someone who can write 1500-2000 words from the summary. I will provide the summary. You need to elaborate more on details from the summary. If you have experience in sensor fusion for perception in robotics, that would be an advantage and will be given priority. This content writing similar to the proposal. Let's talk more in detail. I cannot pay more than the budget.

    $91 (Avg Bid)
    $91 Avg Bid
    72 bids

    I have a series of ongoing , small projects. I will provide semi detailed requirements, methods, and notes. Candidate must be very familiar with Python, and have fast response time for small changes. A knowledge of elementary mathematics is required. , I have updated my project description and added a first introductory milestone. Please take a look and let me know if you want to work on it. I w...

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    24 bids

    Looking for upcoming Technology events either Virtual or Physical events across the globe. The event categories should focus on mentioned below Categories only. elect Event Category Agile Artificial Intelligence Blockchain Cloud Computing Cyber Security Data Science Devops Internet of things Robotics Process Automation

    $66 (Avg Bid)
    $66 Avg Bid
    7 bids

    Write a blog post tutorial for how to deploy and configure ROS2 (Robotics Operating System) on IBM Cloud [login to view URL] [login to view URL] We want How to deploy ROS2 in IBM Cloud to appear in the External ROS Resources list: [login to view URL] Before the project is awarded, the winning freelancer must sign a letter of assurance regarding US export regulations pertaining to this...

    $250 - $750
    Sealed
    $250 - $750
    11 bids

    we are edtech - organisation we provided technology relevant education for school and implementation of technology in syllabus ( robotics AR/VR, IOT animation STEAM) and looking some to develop a document about my organisation and program portfolio to submit for government organisation and private clients attached a sample file, similar needed for my organisation

    $388 (Avg Bid)
    $388 Avg Bid
    2 bids

    I am looking for someone who can create me a website. I want to create a blog, which has the minimum page load time, so I want the design to be minimum. I want the UI to be created using React. The backend using Django or Flask. The frontend design should be similar to this [login to view URL] The obvious details should be present on the website. It should be responsive. The font size should be ...

    $492 (Avg Bid)
    $492 Avg Bid
    30 bids

    I need Bluetooth based Andorid app for robotics toy car, find attached detail from reference link: [login to view URL]

    $13 (Avg Bid)
    $13 Avg Bid
    3 bids

    Hi Rahul K., I noticed your profile and would like to trial your services. I would like to to do a test run on a research and data entry task using LinkedIn. I would like to see if you can provide me with 50 target companies in the UK, with Founders and associated Email IDs if possible. The companies need to be designing autonomous robotics related technology. Need: First name Last Name Job ...

    $19 (Avg Bid)
    $19 Avg Bid
    1 bids

    Hi my name is Tessline. I am in JHB. Starting a trading company. However, I want to sell a 99% profitable trading bot that takes the trade, prevents losses, and closes trades automatically.

    $3478 (Avg Bid)
    $3478 Avg Bid
    6 bids

    Website [login to view URL] Hello everyone, My name is Shane Tonelli and i am looking to assemble a volunteer team to set up some robotics projects we have come up with on side to my company " 704 Studios " I have 3 ideas i am planning out with relatively easy functions comparing them to robots humans can already produce. I cant go into to much information here about them but i can g...

    $29 (Avg Bid)
    $29 Avg Bid
    7 bids

    Elight SPM is an epitome in the new era of the Engineering and Science Industry. At Elight SPM we are committed to evolving as a catalyst in the field of Drones. Elight SPM is committed to developing a future workforce by empowering like-minded people – by giving opportunities to work in the company’s real-time project. We are launching online electronic component selling store which ...

    $80 (Avg Bid)
    $80 Avg Bid
    4 bids

    Design an illustrator image that can be divided into 30 posts for social media we specialize in selling electronics components , microcontrollers(arduino, raspberry pi..), motors, batteries, chassis (cars, drones and tanks) , robotics, cables & connectors, tools, solar panels, lab equipment, toolbox & organizers Our services: 1) a- lab setup b- curriculum advising c- instructor tra...

    $61 (Avg Bid)
    $61 Avg Bid
    19 bids

    I would like to fix OWI robotics arm for painting purposes. The final goal should be something like this video: [login to view URL]

    $90 (Avg Bid)
    $90 Avg Bid
    5 bids

    We Invite developers to design the app for Humanoid Robot Sanbot. Industry : Retail Purpose : A tract, Engage, and Interact with Customers. Check temperature of customers and guide on social distancing. list the departments, and inform about current offers guide them to the department Allow stores to delight their customers with special discount coupons to random users.

    $735 (Avg Bid)
    $735 Avg Bid
    14 bids

    Recently, we successfully fabricated a series of poly(dimethyl acrylamide-co-stearyl acrylate and/or lauryl acrylate) (PDMAAm-co-SA and/or LA) based mechanically tunable thermally induced shape memory type hydrogels (SMGs) via stereolithographic 3D printing process (Shiblee et al., Soft Matter, 2018). By utilizing anisotropic swelling and mechanical properties of the SMGs, we also developed 3D pri...

    $64 (Avg Bid)
    $64 Avg Bid
    14 bids

    Scope of work : Design, Develop and Verify the modules that form the building blocks of SaaS platform in the area of authentication, analytics and visualization. The module will be developed iteratively through a weekly task driven approach wherein following activities will be performed 1) Finalize the input format for a given functional component of the module 2) Finalize the output format fro...

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    2 bids

    Need people with 1-2 years of experience to content QC. The person should have a good understanding of new technologies like AI, Big data, Robotics etc.

    $151 (Avg Bid)
    $151 Avg Bid
    1 bids

    Hello, I have a conference in the office which I need to speak on this topic for 10-15 min. Each topic should have 3 pages of minimum information plus 2-3 images. - it should be in ms word -= format * font size 12 - for text * theme font - times new roman * spacing between lines and paragraph - 1.5 * margin - normal Topic 1 - Robotics 2 - Augmented Reality 3 - Virtual Reality 4 - Bus...

    $100 (Avg Bid)
    $100 Avg Bid
    39 bids