Card attendance system using microcontroller based circuit jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    21,492 card attendance system using microcontroller based circuit jobs found, pricing in USD
    Employroll 6 days left

    At Thumbmatic Solutions Private Limited, we strive hard to build and maintain long-term trusted relationships with customers, partners and employees based on mutual respect, teamwork and collaborative problem solving. We pride ourselves on our ability to deliver high quality, well-documented and transparently implemented custom-made solutions tailored

    $4997 (Avg Bid)
    $4997 Avg Bid
    6 bids

    ...simulation at different USB-C Charge rage and different motor loads to check the board will function as intended and to check for RF, EMC and heat etc. There is also a 5V circuit for ESP32 power and some signalling. The board is 2 layer, 29mm x 100mm approx. Where something cannot be simulated, I would like a manual review to determine that it is

    $165 (Avg Bid)
    $165 Avg Bid
    2 bids
    Time Clock 6 days left

    Attendance / Time Sheet Staff login with 4 digit code. Manager override for hours worked and corrections. Start Button End Button DisplayTotal Hours Worked in day/week/month. Add pic for staff Total 20 staff edit by manager Hours worked report to be generated by the manager on demand. To be run on tablet Theme any fun theme big displays large prints

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    7 bids

    ...a UK based interactive digital company. We need the development of a Bluetooth mouse based on the ESP32 micro-controller (NODEMCU ESP32-S) and am wondering if anyone can do this software for us. The ESP32 does not need to physical interface interface to any actual mouse but handle mouse values passed by a running program on the microcontroller or other

    $1414 (Avg Bid)
    $1414 Avg Bid
    13 bids

    ...we want in our system. major modules which we want in our system are as follows: 1) Attendance management 2) User information management 3) Leave management 4) Payroll management 5) Recruitment management. if you find any module suitable or necessary to be added in HRMS please add the same. minimum features we want in our system are as follows:

    $261 (Avg Bid)
    $261 Avg Bid
    7 bids

    Make a Programmable Logistics circuit using arduino controller with gsm 3G data connection

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    12 bids

    ...we want in our system. major modules which we want in our system are as follows: 1) Attendance management 2) User information management 3) Leave management 4) Payroll management 5) Recruitment management. if you find any module suitable or necessary to be added in HRMS please add the same. minimum features we want in our system are as follows:

    $207 (Avg Bid)
    $207 Avg Bid
    6 bids

    I need to design a switch I can control via a parallel interface. There are 8 inputs and one ou...design a switch I can control via a parallel interface. There are 8 inputs and one output. I decide which input I want to use by flipping the appropriate bit. I need the circuit for the above to be designed, with all the necessary electronic components.

    $150 (Avg Bid)
    $150 Avg Bid
    6 bids

    ...the other module sends data to my server using that SSID and password. there is also a lan port and a pc software. That pc software can scan the module when attached to LAN, but it doesnot show any data when any rfid card is scanned. You have to solve 2 main issues here: 1. Enable reading data on PC using LAN or USB port given here. I wish to see

    $18 (Avg Bid)
    $18 Avg Bid
    1 bids

    ... The device must be functional at a prototype level using commercially available hardware. I don't want to build custom circuit board. I prefer a ready to use technology. The firmware must be written preferably in C / C ++. I will evaluate solutions with alternative languages. The microcontroller must be 16 or 32 bits. I prefer that you use texas instrument

    $1224 (Avg Bid)
    $1224 Avg Bid
    14 bids
    social media campaign 5 days left
    VERIFIED

    We are a r...content to drive business in key areas: restaurant dining traffic, live music event attendance, and booking weddings and private events. Develop and execute a social media campaign to generate leads for our wedding venue, analyze and develop strategy for other goals using Facebook, Instagram, Google and other platforms as necessary.

    $33 / hr (Avg Bid)
    $33 / hr Avg Bid
    42 bids

    ...(with step 100W/m2) και Τ=0 ... 50 οC (with step 10οC) (Indicative parameter values : Habbati Bellia, Ramdani Youcef, Moulay Fatima, A detailed modeling of photovoltaic module using MATLAB, NRIAG Journal of Astronomy and Geophysics, Volume 3, Issue 1, June 2014, Pages 53-61. This and other similar publications, can be found in the documents. You ca...

    $34 (Avg Bid)
    $34 Avg Bid
    4 bids

    Need to Send Input Video Data[Generally Mp4 Format) from Pendrive or SD Card to Controller and then to Touch TFT Display(Any other Display is also Better than TFT like OLED but similar Pricing) *Not with Raspberry Pi Need to Build some Touch Button Functions as Well.

    $136 (Avg Bid)
    $136 Avg Bid
    4 bids

    We build a web application which manage the textile industry and want to integrate a electronic piece into the solution, below further details: - we want to use an ESP8266 wemos D1 R1 wifi enabled board and connect it to a IR Sharp sensor range 10-80 cm, the sensor will be set on a textile production line to watch hangers going out which means a product is completed. - esp should send data to our...

    $508 (Avg Bid)
    $508 Avg Bid
    37 bids

    ...prototype level using commercially available hardware. The firmware must be written preferably in C / C ++. I will evaluate solutions with alternative languages. The microcontroller must be 16 or 32 bits. I prefer that you use texas instrument MSP32 and / or Espressif ESP. I will evaluate solutions with alternative controllers. The system must be designed

    $463 (Avg Bid)
    $463 Avg Bid
    7 bids

    Hi we have developed our own hardware product for bio-metrics attendance of employees. But, so far we do not have Attendance Reporting software to show the attendance taken by our software. Any body have experience in this. Please let me know.

    $581 (Avg Bid)
    $581 Avg Bid
    46 bids

    Hi levstremetskyi80, I noticed your profile and would like to offer you my project. I need to redesign a keypad. need you to draw me the pcb circuit based on a numeric HID keyboard as a base.

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    PCB design of STM32F777x based system controller with 10/100 MBPS Ethernet, USB, Isolated, 2 x CAN, Isolated 2 x RS485, 1 x RS232, SD card, 32MB SPI Flash, RTC, 16 bit colour TFT, on board 48V power supply. Board size and connector positions are already fixed. Requirement is to design a board which meets ESD, EMI / EMC requirements as per IEC61000 /

    $679 (Avg Bid)
    $679 Avg Bid
    16 bids
    Electrical Circuit design 3 days left
    VERIFIED

    Design a power electrical design selection of components Design power supply Simulate design and selection of components

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    41 bids

    ...registration: -All registrants will be added to a series of other events -Registrant will have one ticket which provides access to all events. Please note we are using Barcode Scanner to control attendance. -All normal event features, etc will function Essentially when the registration is completed, it will fire a script that automatically fires a registration

    $112 (Avg Bid)
    $112 Avg Bid
    17 bids
    DATA ENTRY 3 days left

    ...requisition into computer requisition file. 9. Ensures timely and accurate printing of any accessioning records, worksheets, and audit trail reports. 10. Maintains excellent attendance to ensure responsibilities are met....

    $1171 / hr (Avg Bid)
    $1171 / hr Avg Bid
    28 bids
    DATA ENTRYY 2 days left

    ...requisition into computer requisition file. 9. Ensures timely and accurate printing of any accessioning records, worksheets, and audit trail reports. 10. Maintains excellent attendance to ensure responsibilities are met....

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    1 bids

    ...requisition into computer requisition file. 9. Ensures timely and accurate printing of any accessioning records, worksheets, and audit trail reports. 10. Maintains excellent attendance to ensure responsibilities are met. 11. Ensures all work areas are maintained in a neat and orderly manner at all times in accordance with generally accepted laboratory

    $39 / hr (Avg Bid)
    $39 / hr Avg Bid
    8 bids
    Data entry 2 days left

    ...test requisition into computer requisition file. Ensures timely and accurate printing of any accessioning records, worksheets, and audit trail reports. Maintains excellent attendance to ensure responsibilities are met. Ensures all work areas are maintained in a neat and orderly manner at all times in accordance with generally accepted laboratory practices

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    20 bids

    My requirement is to design a Long-Range BLE beacon using the Silicon labs BGM13 module. The software must reside on the BGM13 device as no host microcontroller will be utilised. The BGM13 must simply advertise at a given interval. The advertised packet must include a unique Device_name and Battery_voltage.

    $418 (Avg Bid)
    $418 Avg Bid
    3 bids

    we want to measure following things and send data to a computer using zigbee 1. temperature 2. pressure 3. altitude 4. Pulse sensor 5. ECG sensor 6. accelerometer every equipment will be provided just coding , circuit and working model is your responsibility place - Gandhinagar Gujarat

    $18 (Avg Bid)
    $18 Avg Bid
    2 bids

    digital, analog, or RF design and analysis, such as Failure Modes, Effects and Criticality Analysis (FMECA), Worst Case Analysis (WCA), Electronic Parts Stress Analysis (PSA), Single-Events Effects Analysis (SEEA), reliability assessment, modeling LTspics

    $484 (Avg Bid)
    $484 Avg Bid
    11 bids

    ...clearly mention all the parameters selected in the report Nominate the fault points  and fault conditions in simulation model and record in report Load flow analysis and short circuit analysis of the model Reproduce the same results as of paper For graph along the screen shots of result also Take the computational values from Matlab and then print them

    $647 (Avg Bid)
    $647 Avg Bid
    8 bids

    ...The counting mode (decimal, hexadecimal, or octal) and the counting frequency of the least significant digit (1 Hz, 10 Hz, 100 Hz, or 1000 Hz) depend on your number in the attendance list as shown in Table 1 (if you work in groups, use the number of the group member with the lowest number). All four digits of the counter have to count at the same clock

    $50 (Avg Bid)
    $50 Avg Bid
    8 bids
    Circuit Designer 2 days left

    ...Light Industries which is a company based in Kolkata . We are the only manufacturers of Railway Signalling Equipments all across India and currently exporting to other countries like Sri Lanka & Bangladesh . We are now looking forward to develop electrical products for the government for which we require a circuit designer . Best, Aman Bajla (Business

    $350 (Avg Bid)
    $350 Avg Bid
    10 bids

    We have machines that use a circuit board that is no longer made by the original manufacturer. We have a sample board with schematic, but need help identifying components (resistors, capicitors, potentiometers, dip switches, terminal blocks, etc. The board is 3" X 5.5" and we believe only 2 sided. Scope will include creating the Gerber file(s), identifying

    $1204 (Avg Bid)
    NDA
    $1204 Avg Bid
    48 bids
    Sim controller switch on/off 2 days left
    VERIFIED

    I need an Android app. I would like it designed and built. In particular the solution should consist in one app interfaced to a remote circuit with a sim card connected to a controller that controls a switcher .

    $248 (Avg Bid)
    $248 Avg Bid
    31 bids
    AC DC Power switch 1 day left
    VERIFIED

    Need an SSR for AC and DC input out will AC and DC output , should be short circuit protected

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    17 bids

    I want to design Zeta converter in Proteus using PIC16F877A which has PID control and generates variable PWM for feedback circuit. Codes should be compiled at ccs c compiler. Input voltage will be 5V-30V. You should change output voltage of zeta canverter using key-pad. We will see some information like duty ratio, output voltage etc. on a 16*2 display

    $85 (Avg Bid)
    $85 Avg Bid
    5 bids

    ...lithium batteries off earlier: at 40% (winter storage - degradation is minimal), 60% - 70% - 80% (save lifetime and decrease driving range) and 100%. Switching off takes place based on the voltages that correspond with the 4 "save" positions. As this is not 100% accurate, the switching points are recalculated by measuring the charge energy. I have done

    $663 (Avg Bid)
    $663 Avg Bid
    23 bids
    POS system on Android 1 day left
    VERIFIED

    ...restaurant and wants to make a POS system for our restaurant, we want the POS sytem to be at least have these following things, other than basic POS system: 1. inventory/ingredient tracking. For example, to make a portion of fried chicken needs 100gr of chicken, salt, pepper, etc. then if somebody order it, the POS system could reduce the inventory accordingly

    $899 (Avg Bid)
    $899 Avg Bid
    76 bids

    Hi there, I'm in the process of building a USB composite CDC + MSC device on the STM32F4 Discovery board but i am having trouble to connect to the COM Port when using the composite device. My MCU is the STM32F407IG. I managed the get a working composite device with working driver inf files. I can choose between all combinations of cdc,hid and msc

    $332 (Avg Bid)
    $332 Avg Bid
    7 bids

    Me: I am a senior hardware design engineer in the Bay Area with a potential new product. Prototype hardware is ready, but I need test firmware to validate it. You: Develop a firmware package for electrical validation and debug stage.

    $1114 (Avg Bid)
    $1114 Avg Bid
    18 bids
    Digital twin 1 day left
    VERIFIED

    create a digital twin coupling matlab Simulink and Ansys showing the heat from a circuit and the temperature of it and a building and showing cooling strategies

    $244 (Avg Bid)
    $244 Avg Bid
    6 bids

    I have a very simple "attendance list" for android. There are users and every user have a checkbox. Everything is almost ready but i can't do this part with firestore I need to check/uncheck the checkboxs for one or more users in the list and save the list in DB So I need you to structure it for me on the Firebase. Try yourself if you can do this

    $75 (Avg Bid)
    $75 Avg Bid
    7 bids
    DATA ENTRY 1 day left

    ...requisition into computer requisition file. 9. Ensures timely and accurate printing of any accessioning records, worksheets, and audit trail reports. 10. Maintains excellent attendance to ensure responsibilities are met. 11. Ensures all work areas are maintained in a neat and orderly manner at all times in accordance with generally accepted laboratory

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    19 bids
    DATA ENTRY 1 day left

    ...requisition into computer requisition file. 9. Ensures timely and accurate printing of any accessioning records, worksheets, and audit trail reports. 10. Maintains excellent attendance to ensure responsibilities are met. 11. Ensures all work areas are maintained in a neat and orderly manner at all times in accordance with generally accepted laboratory

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    10 bids

    My circuit is consuming 18mA at standby and 24mA when activated (LEDs twinkle) - at 3.3V based on the code that I wrote. I want you to use my code and introduce low power techniques such as sleep mode, low power mode, PWM, Gamma correction, etc, to reduce power consumption. I want to document the progress of the power consumption from the initial

    $27 (Avg Bid)
    $27 Avg Bid
    7 bids

    I am Odoo ERP...following: Project management module Human resources (leaves, payroll, attendance, employee contract) CRM (customer relationship management) Accounting system Warehouse management features. the writer should be familiar with ERP content and features. you can check other partners websites using this link [login to view URL]

    $85 (Avg Bid)
    $85 Avg Bid
    24 bids

    We are a laboratory of research in France, and we are working on a robotics application. We need to customize a circuit for this application, this means the design and the implementation of the circuit, we need to choose the best ICs according to our requirements.

    $213 (Avg Bid)
    $213 Avg Bid
    30 bids

    Executive suite looking for reliable, responsible, pro active yet patient under pressure, employee who likes a fast paced energetic environment. The job entails constant interaction with tenants and the employee must be on time, reliable and able to complete general secretarial work.

    $1047 (Avg Bid)
    $1047 Avg Bid
    20 bids

    This is a re-launched project as the last one was unsuccessful. We need a circuit designing for a simple dual mic-amp-speaker set up so a store member can speak with customers from behind a safety screen, and customers can talk back. 10w 8ohm at 12vdc is fine. It's basically an intercom with volume controls. As well as this, we need to include an

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids
    mobile app 18 hours left

    daily labour attendance and their wages calculation, advance taken and monthly billing of contractors.

    $375 (Avg Bid)
    $375 Avg Bid
    20 bids

    ...looking for feedback to improve our products. 4. Once you have completed the interview, the interviewer will approve your attendance and submit payment. If you would like to participate, please complete the screener test using this link: [login to view URL]'s-in-milk-manufacturing-aust

    $332 (Avg Bid)
    $332 Avg Bid
    3 bids

    ...looking for feedback to improve our products. 4. Once you have completed the interview, the interviewer will approve your attendance and submit payment. If you would like to participate, please complete the screener test using this link: [login to view URL]

    $285 (Avg Bid)
    $285 Avg Bid
    2 bids