Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,933 catia jobs found, pricing in USD

    Design Optimised Bicycle Frame Design • Bicycle frame design and development. • CAD Modelling • Drafting on CAD software. • CAE analysis of bike frame members and weld design • Motor transmission casing design on CAD • Gear, Shaft, Bearing calculations • Proficient in CAD and reading engineering drawings (In Solidworks and CATIA). • Linear and non-linear finite element simulation (ABAQUS) • Knowledge of GD&T. • Experience of FMEA (Failure Mode Effects Analysis), Kaizen/A3 (continuous improvement and problem solving) process improvement and Poka Yoke (error proofing) techniques.

    $4725 (Avg Bid)
    $4725 Avg Bid
    7 bids

    Hi, I need to make a simulation with 3 collaborative robots from Fanuc CR-35iA and line is for preparing windshields with sealant and rear view mirror. Simulation needs to be made in Catia, I will give you all file for simulation only you need in CAD. Please check the layout. I offer 50USD.

    $95 (Avg Bid)
    $95 Avg Bid
    12 bids
    $21 Avg Bid
    24 bids

    I am seeking 3D CAD model designer services. Specifically, I need my idea designed in the following fifile formats: STEP (.step/.stp), SolidWorks (.sldprt) Parasolid (.x_t, .x_b), Autodesk Inventor (.ipt), CATIA (.catpart), ProE (.prt), ACIS (.sat), and .stl Thank you for your consideration.

    $24 (Avg Bid)
    $24 Avg Bid
    36 bids

    I am seeking 3D CAD model designer services. Specifically, I need my idea designed in the following fifile formats: STEP (.step/.stp), SolidWorks (.sldprt) Parasolid (.x_t, .x_b), Autodesk Inventor (.ipt), CATIA (.catpart), ProE (.prt), ACIS (.sat), and .stl Thank you for your consideration.

    $55 (Avg Bid)
    $55 Avg Bid
    23 bids

    Use the Ansys software to simulate the 3D Catia designs using CFD to find the power and the torque

    $43 (Avg Bid)
    $43 Avg Bid
    18 bids

    For a complex construction project which is being made for the first time in INDIA. Need to convert the architectual Rhino 3d file to Solidworks/Catia which needs to be used for CNC bending and cutting.

    $283 (Avg Bid)
    $283 Avg Bid
    20 bids

    Verification of model made by client Creating assly from model to do structural analysis in ansys for 3 diff materials and compare those results to perform kinematic analysis using catia dmu simulation and compare the results with theroretical analysis

    $8 (Avg Bid)
    $8 Avg Bid
    1 bids

    Dear Yash Jagtap, Surface flaws can be really annoying; however, they can be solved. I can do it for you for around three days. I will do this using CATIA surface design. CATIA is more powerful and precise in surface modeling than SolidWorks, yet they both belong to Dassault Systemes. Having checked the attached link, I found some manifolds and connexity problems, which can be solved by remodeling some surfaces. According to our chat, I am looking forward to implementing the project. Best regards, Shahrooz

    $7 (Avg Bid)
    $7 Avg Bid
    1 bids

    I am doing some practicing And I am stuck and I need help Here's an example

    $83 (Avg Bid)
    $83 Avg Bid
    20 bids

    we want statistical modeling and detailed report on airless tyres using catia and anysis softwares .

    $89 (Avg Bid)
    $89 Avg Bid
    13 bids

    This is an individual assignment whereby you have been tasked by the Racing team to design the front upright for an electric powered lightweight single seater race car. The race car features all-wheel drive and each wheel assembly has its own outboard mounted electric motor and epicyclic gearbox. The team are downsizing their wheels from 13” diameter to 10” diameter wheels and have chosen to use a commercially available 10” magnesium wheel to fit a Hoosier 18.0 X 7.5 -10 slick racing For the purposes of the assignment, CAD and a technical drawing of the OZ 10” Magnesium wheel is provided, the latter can be viewed online here. This will allow the accurate representation of the inside of the wheel and gives sufficient detail for the mounting face of the wheel hub. The...

    $287 (Avg Bid)
    $287 Avg Bid
    11 bids

    I want to learn full catia and solidwork accordingly to the industrial aspects in Mechanical engineering. Such that I can able to draw any drawings and help full to my career growth.

    $101 (Avg Bid)
    $101 Avg Bid
    11 bids

    I need to learn full solidwork and CATIA as per the

    $85 (Avg Bid)
    $85 Avg Bid
    26 bids

    Hello, I made a project in CATIA. I need someone who can render the project in a 3D video with shaders, shadows and textures. (SEE THE VIDEO) I have the CATIA step files ready to convert into AutoCAD. I want the Machine in 3D with textures and shadows like the picture I included for sample. I will have recurrent project similar to this one to do. Budget is in between 30$ to 70$ per video.

    $30 (Avg Bid)
    $30 Avg Bid
    5 bids

    I am looking for a 3D CAD engineer who can create my architecture drawing in 3D cad. Solidworks or CATIA or any other 3D Cad is ok.

    $633 (Avg Bid)
    $633 Avg Bid
    50 bids

    Hello, I have a video made in CATIA with the .STP file ready to export. I am looking for a designer video for rendering a custom assembling and screwing machine with better shaders and texture. It should be a fast process. We have the CATIA files ready and the ready dimensions, movements and axes. The person recruited will be assigned to an engineer in order to complete the video. The machine are in the videos for previewing the conception.

    $124 (Avg Bid)
    $124 Avg Bid
    17 bids

    I am looking for a Catia V5 expert. He / She should have expertise in solid modeling, surface modelling and drafting. And should have good knowledge about sheet metal products.

    $91 (Avg Bid)
    $91 Avg Bid
    19 bids

    Need to design and aircraft fuselage with given dimensions and other designs will be given for reference. Time given for designing is 6-9 days it's an easy design for intermediate and expert level of Catia user. Dimensions shall be given once the assignment has been taken

    $15 (Avg Bid)
    $15 Avg Bid
    39 bids

    Need to pass some sketches of a 4WD Robot, to a 3D Mechanical working model in SOLIDWORKS/CATIA I give you some images with measures and the work is to Model in Solidworks/Catia Have in mind that the manufacturing will be done in Metal and the edges must be round whenever possible. Manufacturing must be economical Thanks

    $173 (Avg Bid)
    $173 Avg Bid
    63 bids

    - Need 3d modelling of an kitchenware product - Modelling can be from AUTOCAD, SOLID WORKS, CATIA

    $74 (Avg Bid)
    $74 Avg Bid
    46 bids

    I need suggestions and help with designing the autonomous car on Solidworks or Inventor. Catia is a plus. Someone who can help me design a battery for the car. FEM simulations and stress analysis required.

    $139 (Avg Bid)
    $139 Avg Bid
    23 bids

    I want freelancers who can able to develop Mechanical Videos like Mechanisms, Machine Tools Working, Automobile Components Working, etc. The ideal professional should be good at Solidworks or Catia or any other software tool that can develop my required task. The attached document consists reference links of our previous videos. The videos consists few slides, which can be ignored. You have to focus and develop just the working of the particular mechanism or device or etc. The Bidder Should Bid For 4 Videos, it means let me know your price for 4 tasks or 4 videos in my budget.

    $36 (Avg Bid)
    $36 Avg Bid
    11 bids

    I want freelancers who can able to develop Mechanical Videos like Mechanisms, Machine Tools Working, Automobile Components Working, etc. The ideal professional should be good at Solidworks or Catia or any other software tool that can develop my required task. The attached document consists reference links of our previous videos. The videos consists few slides, which can be ignored. You have to focus and develop just the working of the particular mechanism or device or etc.

    $11 (Avg Bid)
    $11 Avg Bid
    7 bids

    Project description: • designing elements for the automotive industry from plastics and metal alloys • creating and verifying technical and project documentation • design optimization according to customer requirements • cooperation with the design team in the scope of introducing changes in the structure and technical drawings • strak and design evaluatio...optimization according to customer requirements • cooperation with the design team in the scope of introducing changes in the structure and technical drawings • strak and design evaluation in terms of feasibility and compliance with applicable standards developing concepts • long term collaboration possible • remote work possible • full time activity - 40h avalibility a week is a must &...

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    10 bids

    Robot design for lifting 100 kg glass for assembly task with analysis in CATIA

    $66 (Avg Bid)
    $66 Avg Bid
    9 bids

    Hi, The Catia file named "retract mech" is the whole assembly. How it works is that there is a single servo motor in the middle which is connected to the "midrib". When the motor turns, the midrib is extended which pushes out the connector arms which in turn causes the "leg" to rotate about the hole in it. The hole in the "leg" is supposed to be the axis of rotation for the "leg" and needs to be fixed. The "holder" has four arm like features which have holes, we use that to connect everything to the drone. That is the original plan and it is inspired by this video: The other thing that we need to do is to be able to remotely send a signal to the motor to turn. If you open the image file, you will see a rough idea of the...

    $134 (Avg Bid)
    $134 Avg Bid
    21 bids

    Details Proposals Payments Files Tasks Share Reviews Thorough Design required for a Friction/Traction Drive for Power Transmission to a Centrifugal Compressor. $250.00 – 750.00 USD A Traction Drive is a form of power transmission like Gear Transmission without Gear Teeth.... The aim should be to keep it at a general level, not focusing on one specific set of gears/compressor parameters.  Produce documentation of the calculation/dimensioning process. Second Requirement: Dimensioning and calculation of a specific gear for a centrifugal compressor.  Documentation of calculations as described in first requirement.  3D-modelling in suitable CAD software. Creo or Catia or other will work.  Manufacturing drawings for a prototype.  Gear and compressor parameters will be provi...

    $538 (Avg Bid)
    $538 Avg Bid
    16 bids

    Design a product on sensor-based water tank device which stops the flow of water after it reached the desired level including all the following steps: 1 Introduction and Instruction 2 Need Identification, cause effect diagra...specification table. Submission of a One page (written on both side) Abstract (It contains: Statement of the problem, Principle of mechanism used, Figure, Working principle, Cost table indicating all components, services, final cost, etc.). 8 Rough drawing of components, Assemble product, dimension, materials of each component. 9 3D modeling of product using AutoCad, Catia, development, continue… 10 3D modeling of product using AutoCad, Catia, development, continue… 11 Introduction on Patent writing and Startup strategy. 12 Patent wri...

    $64 (Avg Bid)
    $64 Avg Bid
    7 bids

    A Traction Drive is a form of power transmission like Gear Transmission without Gear Teeth. Traction Drive is also called Friction Drive. In our company, we required to transmit power to a centrifugal compressor by using a Traction drive. Another name for traction Dr... The aim should be to keep it at a general level, not focusing on one specific set of gears/compressor parameters.  Produce documentation of the calculation/dimensioning process. Second Requirement: Dimensioning and calculation of a specific gear for a centrifugal compressor.  Documentation of calculations as described in first requirement.  3D-modelling in suitable CAD software. Creo or Catia or other will work.  Manufacturing drawings for a prototype.  Gear and compressor parameters will be provided.

    $415 (Avg Bid)
    $415 Avg Bid
    13 bids

    Merhaba, Avrupa'da Büyük bir araç firmasından almış olduğumuz bir iş için Catia V5 programı üzerinden araç tasarımı deneyimi sağlamış kişi ve kişilerle çalışmak istiyoruz. Yapılacak iş modeli; Araç için verilen hazır tasarımın belirtilen görevler dahilinde program vasıtasıyla görevlerin yerine getirilmesi. Sürecimizde çok iyi anlaşırsak ilerleyen süreçlerde kalıcı İş ortaklığı kuracağımıza inanıyoruz. İngilizce İş detayı ; Clearly demonstrate ability to ensure simultaneous engineering approach to develop right first time designs including: - · Body packaging, concept studies and detailed design, including sizing calculations and use of CAD / CAE to create viable se...

    $41 / hr (Avg Bid)
    $41 / hr Avg Bid
    15 bids

    Hi Vadim D., I noticed your profile and would like to offer you my project. We can discuss any details ?

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    I have rendered a image of a fighter jet , n it's very important to model that design ..! I need a catia or nx cad designer for the job N be will be a part of the company n future projects

    $6 (Avg Bid)
    Guaranteed
    $6
    6 entries

    I am looking for Mechanical engineers to work with me on multiple tasks related to following subjects: 1. Automotive manufacturing 2. Advanced manufacturing Freelancers must be proficient in following: • Simulation like CFD, FEA, structural analysis • Designing tools like COMSOL, SolidWorks, ABAQUS, CATIA, ANSYS, 3DMax What I am expecting: 1. Dedication to the work 2. On time delivery of work without any delay 3. Well arranged and properly formatted reports with plagiarism count below 10%

    $139 (Avg Bid)
    $139 Avg Bid
    12 bids

    Qualification : BE Mechanical - Min. 2 yrs. experience or Diploma Mechanical - Min. 4 yrs. experience in cad software Creo / Unigraphics / Catia Experience : 3D modeming & 2D detailing of Jigs & Fixture, Material Handling Equipment Role : 1. Design of material handling equipment 2. Design of fixture or jigs 3. Design of control chart, process flow 4. Good knowledge of manufacturing process as welding, sheet metal, assembly 5. Good knowledge of bus manufacturing process 6. Good knowledge of TPM, Kaizen, Kanban, Quality Process, Time study, Just-in Time etc.

    $313 (Avg Bid)
    $313 Avg Bid
    20 bids

    Hello, I need a CAD (preferably designed in Solisworks, NX or Catia) design of a car accessory, dimensions are approximately 135 cm x 200 cm x 25 cm. Visuals are just samples, we will talk about the details. The budget is maximum $40, no negotiation. I will share the certain dimensions and leave some parts to your talent, so accept this if you have a good art skills beside design skills.

    $63 (Avg Bid)
    $63 Avg Bid
    29 bids

    design and analysis of a rover having rocker bogie mechanism modification on solid work or catia

    $96 (Avg Bid)
    $96 Avg Bid
    27 bids

    Need an expert with stress analysis for structure and surfaces. Also need native files drafting in 2d and 3d with stress analysis report in catia and ansys

    $104 (Avg Bid)
    $104 Avg Bid
    13 bids

    Hi, I’m look for a technician. I need a 3D design for use with an injection moulding process. It needs to be in file formats of either STEP, SOLIDWORKS, IGES, Parasolid, PTC Creo, autodesk, CATIA, or acis.

    $144 (Avg Bid)
    $144 Avg Bid
    72 bids

    We are a Mechanical engineering team, working with large research centrer in Europe. We need some support to update and go through industrial 2D drawings. We will provide drawings annotated and will support will a workstation accessible by remote control. Experience with CATIA v5 v6 is appreciated. Through this work, you will learn a lot about ISO and GPS standards, best practice for the futur of engineering in Europe in the coming 30 years. We might be looking for a regular support if the results are good. Looking forward to read you, BR

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    48 bids

    Svenska Rotor Maskiner is a leader in the development of compressors and pumps for various industries such as biogas, refrigeration, fuel cell etc. We are now investigating to use the toothless planetary gear technology for centrifugal compressors. 1. Establish suitable methods fo...specific set of gears/compressor parameters. • Produce documentation of the calculation/dimensioning process. • A literature study on the subject is to be included. 2. Dimensioning and calculation of a specific gear for a centrifugal compressor. • Documentation of calculations in accordance with point 1 above. • 3D-modelling in suitable CAD software. Creo or Catia or other will work. • Manufacturing dra...

    $674 (Avg Bid)
    $674 Avg Bid
    22 bids

    I need to get STEP, STL, Catia or IGS file. I got the design in OBJ and a Render. Also the design that is a bottle on the OBJ is a compact I need to make it empty and add a bottle thread. thanks

    $126 (Avg Bid)
    NDA
    $126 Avg Bid
    48 bids

    Light weight Aircraft's landing gear structure by using catia.

    $46 (Avg Bid)
    $46 Avg Bid
    13 bids

    Finish an aircraft Main Gear structure design in Catia according to the given data in the attached file. Complete the overall design work, include design requirements introduction, loads calculation, material selection analysis, structure layout and loft, three-dimensional modeling, structural strength analysis, model improvement, and get last the structure weight.

    $149 (Avg Bid)
    $149 Avg Bid
    23 bids

    I have a file and I want to open it in catia but I'm getting error I need somebody to redraw the shape or open the file somehow

    $20 (Avg Bid)
    $20 Avg Bid
    3 bids

    We welcome you to work in our project regarding the design and simulation of the AIRCRAFT ENGINE COWL. The requested modelling software can be Catia V5 and the simulation can be done in any software you prefer. Thank you.

    $20 (Avg Bid)
    $20 Avg Bid
    8 bids

    more info will b shared in chat

    $8 - $20
    Sealed
    $8 - $20
    19 bids

    Require 1 or two geometries to be made in Catia and applied to a base surface model

    $162 (Avg Bid)
    $162 Avg Bid
    26 bids

    I need someone to design in Catia like bulkhead of aircraft wing and it's jig and not only this, there are 4 design option among which one can chose only one. Bottom line is that there are 4 designs out of which one has to chose one design and he has to design that in Catia including it's 2D design with 3 views (top view, side view and front view) and has to make a report file on that design.

    $92 (Avg Bid)
    $92 Avg Bid
    6 bids

    the commercial aircraft engine cowling design and simulation needs to be done. the dimensions of the engine is also to be verified. we request to use catia v5 (if any other software is used please mention)

    $634 (Avg Bid)
    $634 Avg Bid
    5 bids