Freelancer mm jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,264 freelancer mm jobs found, pricing in USD

    I am looking at an experience firmware programmer who can setup a hobby project for us using ADXL 354 or 355 accelerometer. Need to access X,Y and Z G values and convert to mm/s. Temperature reading also to be included. Arduino or similar development board to be used.

    $208 (Avg Bid)
    $208 Avg Bid
    7 bids

    I have a pre-made bootstrap template - [login to view URL] Just need the javascript. I've been told an easy job for a javascript coder.

    $22 (Avg Bid)
    $22 Avg Bid
    9 bids

    SAP MM export needed i have small task.. need it to be done asap.... NOTE: bid only if your ready to start

    $118 (Avg Bid)
    $118 Avg Bid
    10 bids

    ...XM430-W210-T and two XL430-W250-T Dynamixel servos. On the 5 link there is an end effector — the suction cup for the vacuum system. The objects of manipulation are cylinders 60 mm dia and 25 mm height. Cylinders might be mounted horizontally or vertically and the arm should place the suction cup perpendicularly to the cylinder’s base to grab it. I have attached

    $200 (Avg Bid)
    $200 Avg Bid
    3 bids

    Poster for international healthcare device exhibition. Innovative connected cap for an insulin pen. Clear poster u...images and logos that are proportionate to poster size. Brief outline attached. Total Graphic Area: 850 (w) x 2150 (h) mm Including 150mm at bottom (non-visible image area in roll mechanism). Total Visual Area: 850 (w) x 2000 (h) mm

    $27 (Avg Bid)
    $27 Avg Bid
    33 bids

    ...list provided by myself. Second project milestone: tune the scraping to take into consideration typos or articles with similar descriptions, example: article description in mm vrs article description in inches or articles with different names that mean the same thing. Other considerations could rise in order to obtain an adequate result. Will work

    $125 (Avg Bid)
    $125 Avg Bid
    3 bids

    ... origin_state --> data located in the "ST" column located AFTER the "Origin City" column ship_date --> data located in the "P/U Date" column, change to the YYYY-MM-DD format destination_city --> data located in the "Dest. City" column destination_state --> data located in the "ST" column located AFTER the &quo...

    $173 (Avg Bid)
    $173 Avg Bid
    11 bids

    I need a solution that provides the following: - automation for 3 linear actuators - one actuator will move a housing 400 mm - two actuators will move to shades 90 degrees - all motions are low effort - provides manual deployment option - a small app that allows for wireless control from a PC

    $586 (Avg Bid)
    $586 Avg Bid
    10 bids

    The dxf file is in millimeters and need it to be converted to inches.

    $18 (Avg Bid)
    $18 Avg Bid
    17 bids

    Aim of the project: development of 5 characters design for miniatures within three days Miniatures' characteristics: - 32 mm - Fantasy style

    $109 (Avg Bid)
    $109 Avg Bid
    25 bids

    I need SEO support for Month 1 for (MM). This will be on page and off page SEO.

    $112 (Avg Bid)
    $112 Avg Bid
    14 bids

    We must have checked our server for malicious script / program using the server for portscan. A firewall must be set up that blocks all IP addresses trying to contact the server via ssh The work must be done through team viewer. Work time 1-2 hr

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    4 bids

    I need a simple business card to send to print with the attached fonts, images and logo. 85 x 55 mm Logo exists and all content is there. Shouldnt take you more than 30 min. (Please add space for cutting after printing of 5mm - thanks!) FRONT: ........................................... [Logo in top left corner [PDF file]] JEANETTE TOKSIG DESIGNER

    $24 (Avg Bid)
    $24 Avg Bid
    34 bids

    Looking for a freelancer SAP Consultant for one of my projects that involves preparation of accounting manual of the processes of a company . SAP module covered are : FI, CO, SD,MM,FA and PP

    $228 (Avg Bid)
    $228 Avg Bid
    19 bids

    For this contest, please design/layout a simple invitation. See the attached invitations from previous y...oversized postcard layout as follows (PLEASE LEAVE SIGNIFICANT BLEED/NO IMAGE AROUND THE EDGES): Document Trim Size 8.52" x 5.47" 216 x 139 mm 2556 x 1642 pixels Full Bleed Size 8.64" x 5.59" 219 x 142 mm 2592 x 1677 pixels Good luck!

    $70 (Avg Bid)
    Featured Guaranteed
    $70
    148 entries

    ...these need to be changed to match the diamond style in the other images (again can probably be sourced from the other images). Some of the images have a red arrow showing a mm size which needs to be removed (these are in white space so it's very simple to remove). I have some other image and retouching work I need doing, but this is the most pressing

    $149 (Avg Bid)
    $149 Avg Bid
    56 bids

    ...or drive to another node if there is another node on the way. The path must be completed in a given period of time. The robot is a rectangular parallelepiped with 350x200x350 mm sides on the differential drive platform. In other words, it is a wheeled mobile robot. The velocity and acceleration (or deacceleration) of each wheel is controlled by a separate

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    6 bids

    ...this advice, info and link manufacturers and suppliers / wholesalers for the production of our new coffee machine. So what we need exact is: - heating element around 70mm a 80 mm diameter - 500 a 650 watt - pre-heating element to position in the coffee machine to bring the temperature of the water from room temperature to 60 a 85 degree ( adjustable )

    $52 (Avg Bid)
    $52 Avg Bid
    5 bids

    ...this advice, info and link manufacturers and suppliers / wholesalers for the production of our new coffeemachine. So what we need exact is: - heating element around 70mm a 80 mm diameter - 500 a 650 watt - pre-heating element to position in the coffee machine to bring the temperature of the water from room temperature to 60 a 85 degree ( adjustable )

    $198 (Avg Bid)
    $198 Avg Bid
    19 bids

    ...(Inches) Must be carefully centered and saved as .jpeg "12 quality" Portrait Style All files must be submitted in Inches ( Imperial Units) only. I will not accept metric ( cm/mm). When copying and pasting original file into smaller files, Make sure images are scaled proportionally and scaled perfectly to fit into frame size and centered. If anything

    $35 (Avg Bid)
    $35 Avg Bid
    21 bids

    i want a packing design for pringting. Box look as the file attachment . 1) size is:150X wide 55* heigh 45 (mm) 2) Brand Name: KORSMALL 2) Text: Title:REUSABLE K-CUP & CARAFA FILTER FOR KEURIG BREWER * COMPATIBLE WITH KEURIG 1.0 & NEW KEURIG 2.0 * BPA,LEAD, DEHP FREE & DISWASHER SAFE Important Tips: 1. DO NOT overfill capsule or

    $50 (Avg Bid)
    Guaranteed
    $50
    6 entries

    I have some issues for sap mm / sd . creating a batch management for material and the batch should be pick as per the search strategy where system automatically select batch number as per the expiry date

    SAP
    $87 (Avg Bid)
    $87 Avg Bid
    23 bids

    I need stl files for four different board game figures. They will be 30 mm. Two humans and two zombies. May also need a catapult. I have the illustrations. This for Twilight Creations.

    $937 (Avg Bid)
    $937 Avg Bid
    15 bids

    HI, there . We like you to post product reviews on [login to view URL] over 3-4 weeks . We are in fashion industry , please refer to free back such as [login to view URL] , [login to view URL] If you are interested . Please contact us . Regards Lucy [login to view URL]

    $35 (Avg Bid)
    $35 Avg Bid
    1 bids

    I need an android app for Paging system : There will...same time, receiver unit displays the queue of other calls. Log file: Generate a log file on the receiver unit daily by the date, and reports the number of calls in a day. [login to view URL] Information needed in the txt file: Time of call, ip address, color pressed. See attachment for detail.

    $25 (Avg Bid)
    $25 Avg Bid
    8 bids

    The spine of the book, just .408 mm high (when the book is laying flat) and 10.36mm wide (long - the height of the book when standing on its edge), need to be optimized in quality and clarity.

    $23 (Avg Bid)
    $23 Avg Bid
    15 bids

    Hi Mm Technologies, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    1 bids

    Need to create an EA which is Grid Based with MM, Trailing TPs, Breakeven and Martingales,

    $111 (Avg Bid)
    $111 Avg Bid
    3 bids

    ...the general idea. Full Bleed Size (starting document size) 5.59" x 4.33" 142 x 110 mm 1677 x 1300 pixels * Finished artwork should use the full bleed dimensions for best results. Document Trim Size (final size after being cut) 5.47" x 4.21" 139 x 107 mm 1642 x 1264 pixels * Please be sure to keep all text and photos within the safe cutting

    $100 (Avg Bid)
    Urgent Guaranteed
    $100
    49 entries

    I need to create two arts adaptable to post both in instagram (horizontal 1080 x 3240 px) and printing 99 x 70 mm vertical (A4 format size divided by 3). These will be a Tourism Agency tour advertising with price, included items, service conditions and company/contact data based on company branding (content will be all provided).

    $24 (Avg Bid)
    $24 Avg Bid
    59 bids

    1. wooden with carper floor 2. size 5000 x 3000 mm ( one side open ) 3. podium size as par attached ppt 4. colour red and white (Removed by Freelancer.com Admin) pls. share me your price list

    $66 (Avg Bid)
    $66 Avg Bid
    2 bids

    MM Module Requirement 1. Company Code – Create, Edit, Delete, block, View and List Report 2. Plant Code – Create, Edit, Delete, Block, View and List Report 3. Purchase Organisation – Create, Edit, Delete, Block, View and List Report 4. User and approver – Create, Edit, Delete, Block, Authorisation of page access, View, List Report 5. Material – Create

    $445 (Avg Bid)
    $445 Avg Bid
    15 bids

    ...(detail columnwise) Please provide Sample as below : Naming:- Make Model Version Body style Price:- Ex Show Room Body:- Length (mm) Width (mm) Height (mm) Wheelbase (mm) Ground clearance (mm) Kerb weight (kg) Bootspace (litres) No of doors Seating capacity No of seating rows Engine:- Displacement (cc) Max power (bhp) Max power (rpm)

    $19 (Avg Bid)
    $19 Avg Bid
    26 bids

    Hello I attached photos of the buggy i need to be done for 3d printing.(here you have a video for more details [login to view URL]) I only need th...print each part separatly and mount it togehter...i attached mounting photos how the different parts could be drwan for better assembling...i think a wall thickness of at least 4 mm should do it.

    $154 (Avg Bid)
    $154 Avg Bid
    13 bids
    Trophy icon Redesign my business card Ended

    ...all supporting files, including fonts if non-standard. Template specs (rounded corners): Document Trim Size 3.50"; x 2.00"; 89 x 51 mm 1050 x 600 pixels Full Bleed Size 3.62"; x 2.12"; 92 x 54 mm 1085 x 635 pixels Finished artwork extend to fill the full bleed area to avoid white edges around. I plan on using Spot Gloss, which

    $100 (Avg Bid)
    Guaranteed
    $100
    435 entries

    ...talking, turn on flash, record a slow motion movie for 5 seconds (at highest resolution possible for a iPhone 6) - Turn off flash - Automatically save video with format “YYYY-MM-DD HH:MM:SS” to Gallery - Move to next screen Screen 3: PLAY VIDEO WITH SPECIAL EFFECTS - Show video in central screen - Auto start playing the video - Apply OpenCV threshold

    $509 (Avg Bid)
    $509 Avg Bid
    26 bids

    I want to design a logo for cafe name MM.

    $70 (Avg Bid)
    $70 Avg Bid
    151 bids

    I want promotional vedios & images for my project

    $118 (Avg Bid)
    $118 Avg Bid
    5 bids

    We need to have aprox 100 products translatet into danish from english. We will ask freelancer to make a test translation of the description below before deciding. A typical description can look like this: The new, rechargeable 2018 version is offered in a white painted finish with an elegant leather handle that enhances its aesthetic quality. Its

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    22 bids

    Only for people with previous experience with deribit and trading systems I need a system wich u...confirm it is working It needs to run stand alone without needs additional software I want the source code I need inputs for target (%), stop loss (%), candle size, etc MM will be using % of the account or martingale These are the basic details

    $225 (Avg Bid)
    $225 Avg Bid
    2 bids

    Hi, we need solution on Prefix sender id (Ex: MM-INFORM) in Kannel sms gateway, also need solution on TPS and Binds Control option, please contact:[removed by Freelancer]

    $196 (Avg Bid)
    $196 Avg Bid
    7 bids

    Make me 3 flyer design with front- and back design I have the text, and you design. The subject is - Builders service - Damage service - Property Service. Al...back design I have the text, and you design. The subject is - Builders service - Damage service - Property Service. All has to be in 2 diffrents size A5 (148x210 mm) and A4 (210x297 mm)

    $109 (Avg Bid)
    $109 Avg Bid
    83 bids

    I want made a drawing of a product , for production. most be foldable the construction will be made in plastic material. type lexan size 768 mm wide and 2048 mm high .

    $123 (Avg Bid)
    $123 Avg Bid
    70 bids

    ...an Adobe (ID) In Design expert to finish my book cover, probably take less than 5 mins for someone that know what they are doing. See Issue below: Need to set spine to 9.2976 mm and make sure the Text on spine is at least .0625" of space above and below The spine text is too large, which can cause the text to wrap onto the front or back cover. It must

    $27 (Avg Bid)
    $27 Avg Bid
    20 bids

    Hi Mm Technologies, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    1 bids

    Looking for a great scanning freelancer to create my clayMouse.stp. Here are the steps: note: with all due respect, please ONLY APPLY IF YOU AGREED and can follow the steps, beginning from (1). (1) Please read [login to view URL] file. This is an example showing you this stp did NOT pass the 0.1mm test. If you feel you can do the job, YOU

    $231 (Avg Bid)
    $231 Avg Bid
    29 bids

    Data format: 85.2 cm x 210.1 cm, final format 85 x 200 cm Please keep 10 mm to the top and 100 mm to the bottom. No important images or texts may be created here. otherwise they will be covered by the frame of the roll-up. Simple: Logo and the URL: [login to view URL]

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    35 bids

    After a successful Freelancer campaign to design our Logo, we are back to seek help with our first label design. This label will be made out of pressed Tin metal & will be applied to a 500ml Tall Flint bottle, so please keep that in mind when you're designing. The design must make use of embossing as the label will be pressed from a mould created by

    $360 (Avg Bid)
    Featured Guaranteed
    $360
    129 entries

    I need Online booking / appointment system Front end: there will be option to select worker , select service, select available date/time an...(number of days before the appointment) This script will have changes in the future so I am looking forward to have a long term relationship with the freelancer. *time should be 24hour format *date dd/mm/yyyy

    $807 (Avg Bid)
    $807 Avg Bid
    104 bids