Instrumentation jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,361 instrumentation jobs found, pricing in USD

    designe high water gas shift reactor include: Section 1 Introduction Thermodainamic Calculation Chemical and mechanical design(In detail) (Excel sheet need also) Instrumentation and control including Engineering drawing Design specifications Sustinability Section 2 Economic cost for high shift reactor include Capital cost, operational cost and viability-profitability Section 3 Safety and Environmental issues HAZOP Environmental Impact Survey Startup and Shutdown procedures Other issues relating to safety WOrd cout : 7500 words Referencing: Harvard style , 10 references No plagiarism!!! else it will be rejected

    $239 (Avg Bid)
    $239 Avg Bid
    3 bids

    ...study design template. The case studies will be approx. 350 words related to industrial projects for a manufacturer of instrumentation and automation systems. The specifications are as follows: - Double-sided, A4 full colour case study - Front side: Title of Case Study and Brief Project Details (Who, What, Where, When). A project image, customer logo, web address, and phone number. - Back side: Hero Image, Title, case study copy with sub headings, quotation by customer emphasised and pulled out in large bold type. Customer logo, web address and phone number. I will supply the copy and images. You will create a simple and elegant design for this industrial instrumentation supplier. There will be 4 case studies to produce in the initial instance. Please provide a q...

    $231 (Avg Bid)
    Urgent
    $231 Avg Bid
    25 bids

    Please see the attached file these are the details. I need the program and the report. Please note I am using dynamic C 9.62

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    i am an Instrumentation & Control Engineer ...working for Emerson Process Management ahmedabad....have grip on PLC's ,SCADA,HMI's and Instrumentation related problems and solutions.

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids

    ...to introduce ourselves as one of the emerging Engineering Design Solutions provider formed by group of Engineers with vast Industrial experience. We are committed to provide services within stipulated time and constantly challenge to find better ways of executing the project to attain customer satisfaction. Our core strength is to provide services related to Piping, Process, Mechanical, Instrumentation, Structural Design Engineering. Magnus Global Tech is focused on providing Detailed Engineering services to Plant industries for both Green Field and Brown Field Engineering. Piping Design Engineering: Preparation of Piping layout, Preparation of GA Drawings, Piping 3D Modeling (PDMSPDSSP3D), Pipe Wall Thickness Calculations, Piping Stress Analysis (CAESAR II), Piping Isom...

    $3164 (Avg Bid)
    $3164 Avg Bid
    11 bids

    ...drawings, and engineering specifications for system modifications Required skills: • 5+ years of experience in installation, repair and maintenance of electrical system equipment and components • Associate Degree or other formal training in electrical background • Strong electrical knowledge of electrical systems, breakers and power distribution systems, motors, motor control equipment, instrumentation, PLC's and AC/DC drive systems Desired skills: • Experience working with vehicular electrical/electronic/electromechanical systems • Experience working with theatrical lighting equipment and/or control systems • Experience working with photovoltaic and/or battery systems • Experience working in professional electrical constr...

    $34 / hr (Avg Bid)
    Featured
    $34 / hr Avg Bid
    11 bids

    ...pdf Nice to have, but not mandatory: Finale 2012 default file to be used: The way how you edit the score is up to you but you will have to deliver: * Full score as Finale File (*.mus) * I also need your rights as an arranger to use the score (e.g. for live performance, recording, hiring, sale etc.) If possible use the following instrumentation: 2 Flutes (Piccolo if required) 2 Oboes (English horn if required) 2 Clarinets (Bass clarinet if required) 2 Bassoons (Contrabassoon if required) 3-4 French Horns 3-4 Trumpets 3-4 Trombones 0-3 Saxophones 0-1 Tuba Strings (Vln1, Vln2, Vla, Vlc, Bass) 2-4 Percussion (e.g. Timpani, drum set, percussion...) 0-1 Piano 0-1 Harp 0-2 Guitar If not using

    $29 - $245
    Sealed
    $29 - $245
    8 bids

    i need it you in 15 day's . also you can find the attachment ,you will find everything about the coursework

    $394 (Avg Bid)
    $394 Avg Bid
    16 bids

    Instrumentation Engineering: Engineering Services is in accordance with International Standards like ISA, BS, OSHA, ANSI, NEMA, IEC, NEC, FCI & NFPA. Preparation of design basis Preparation of control philosophy Preparation of detailed execution drawings Preparation of instrument index Preparation of instrument elevation plan Preparation of interlock logic diagrams Preparation of cable tray / cable trench layouts Preparation of junction box termination drawings Preparation of instrument hook up drawings Preparation of cable schedules Preparation of fire and gas drawings Preparation of cause and effect drawings Preparation of requisition and specifications for instruments Foundation field bus installation drawings Technical Bid evaluation Review of vendor packa...

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    7 bids

    I want a logo in high resolution, transparent. The company is about automation products and applications. Has to be somewhere the letters IC (instrumentation and controll).

    $39 (Avg Bid)
    $39 Avg Bid
    19 bids

    I want a logo in high resolution, transparent. The company is about automation products and applications. Has to be somewhere the letters IC (instrumentation and controll).

    $65 (Avg Bid)
    $65 Avg Bid
    65 bids

    ...it should take an extra 300ms to run. Similarly, "qArg=100" should delay the request by 100ms. Something like () is fine here. This should be capped at 1000ms (i.e., if qArg=1000000, only sleep for 1000ms). * If any of the pages are passed "qQuery=true", instead of running the normal database query, it should run a query that takes an extra 200ms to run. # The instrumentation I want to get visibility into what this site is doing. You should instrument both sites with TraceView. There is a 14 day trial available (link below), which should give you enough time to instrument this site. Go through the installation procedure on both machines, and make sure they have the following: * Basic install (i.e., the tracelyzer daemon is running) ...

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    2 bids

    ...all of these cases, you should ignore the result -- the important part is that the call is made. You should use the following libraries / versions: * Apache webserver, version 2.2, set up to proxy requests to Tomcat. * Tomcat webserver, version 6.x. * Spring MVC framework, version 3 * xmemcache memcache client, version 1.3.6 * MySQL JDBC * Apache HTTP client, version 4. # The instrumentation I want to get visibility into what this site is doing. You should instrument both sites with TraceView. There is a 14 day trial available (link below), which should give you enough time to instrument this site. Go through the installation procedure on both machines, and make sure they have the following: * Basic install (i.e., the tracelyzer daemon is running) * Apache...

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    5 bids

    ...You need to modify/edit/mix the instrumentation (or better still change it completely) and provide the voice. The voice could preferably be a lady's voice (or a child's) . I want a music arrangement with the vocals. I can send sample songs to give you an idea of the quality of music and voice I am looking for, and the way I want my song to sound. I can provide the written lyrics if needed. THe vocals can be a lady's or a child's but it should definitely be sounding fun and because this is a fun song. Also should be melodious and sound good. If you want, you can change the way the song is sung to suit the music, for example with added interjections. Also the music should be catchy, with a hip beat, upbeat and foot-tapping kind. You can have the instrument...

    $164 (Avg Bid)
    $164 Avg Bid
    12 bids

    We are and engineering company working in the field of Electronics and Control Instrumentation. We are looking for freelancers for data mining potential clients for our company from the Internet. We provide vast support for new people to start working with us with target areas and sources.

    $168 (Avg Bid)
    $168 Avg Bid
    3 bids

    Hi, I would like a script / macro in Excel to filter data and generate reports based on valid data. I have numerous text files that contain +30k lines of data separated by commas. Each file represents the activities of a piece of construction equipment with each line reporting the output of the instrumentation on the machines for that second. So the data comes in at one hertz and a file contains approx 12 hrs of recording. The program needs to: - Read the file and report strings of data that delineate the installation of a product in a single report for each installation. - There are between 300-900 reports per file. - Each report needs to show the raw data, show a summary table that gives max depth, max pressure, location, time start & finish etc., and 1 or 2...

    $1127 (Avg Bid)
    $1127 Avg Bid
    19 bids

    Writers should have experience writing technical white papers, case studies or thought-leadership papers of 1,500 – 3,000 words, on any of the following subjects: material handling and logistics, food processing, oil and gas, nanotechnology, bioresearch, medical, pharmaceutical, plastics, packaging, power generation, alternative fuels, water and wastewater, instrumentation, high-end audio, software, manufacturing, industrial controls, photonics, electronics, design/build, security, sustainability and robotics. The ability to review and digest considerable volumes of technical information from multiple sources, including Internet, is essential. Interviewing for stories is not required. Writers will be given the overall focus of the story and supplied with partial technical info...

    $351 (Avg Bid)
    $351 Avg Bid
    6 bids

    PROJECT: I need two (related) music tracks (jingles) to form an Intro and Extro for an educational cartoon series. You can find a beta version of one cartoon episode here (without the visual intro or extro!): The Intro should be 5-8 seconds long The Extro for the credits should be 2-3 seconds long Mood for both is: happy, fun Instrumentation: cool base line + whatever you think fits with it (or keep the base solo). Good example of what I'm looking for: See "Crazy Gang 10" for an example of an intro See "Crazy Gang 13" for an example of an extro Note: I would actually license this track from audionetwork because I like it, but according to the rules of audionetwork I would have

    $288 (Avg Bid)
    Featured
    $288 Avg Bid
    23 bids

    High in demand sensor required in Automatic Machine. We require candidate to visit factories. His daily remuneration is in four figure includes transport, food and assigned visits. He will work As and When required by us. Conversant with automatic machines will be his added qualification. B.Sc. (instrumentation, electronics,physics), Electronics, Electrical degree/diploma preferred.

    $1 - $2 / hr
    $1 - $2 / hr
    0 bids

    PLEASE DO NOT BID IF YOU DO NOT HAVE AUTOCAD MEP or REVIT EXPERIENCE and LICENSE - THANKS *** See files attached and description below: - Assignment: Piping & Instrumentation Diagram (P&ID) to draft based on existing PDF with updates to bring *Redraw the old PDF (file "scan042") in AutoCAD (DWG), A0 format using the legend (see colours, lines, etc. they use in the "" file, legend in top right corner) *Replace the six diagrams by the updated ones contained in the " " file - Software: AutoCAD MEP

    $157 (Avg Bid)
    Urgent
    $157 Avg Bid
    14 bids

    I need to have made in Altium Designer 10 an Instrumentation Amplifier with RFI circuit. Please see the attache file for more details. The budget is 70 USD.

    $30 - $250
    $30 - $250
    0 bids

    A very simple Altium Designer 10 project. You have to make an Instrumentation Amplifier (In-Amp) with RFI circuit, simulate it, and provide basic calculations

    $118 (Avg Bid)
    $118 Avg Bid
    6 bids

    ...and Cadence OrCAD solutions. FEATURED PRODUCTS OrCAD PCB solutions for PCB design, PSpice and Signal Integrity design. WHO SHOULD ATTEND? ? PCB Designers ? Hardware Design engineers ? Electronics System designers ? FPGA Engineers ? Scientist- Analog/Mixed, Scientist- RF, Scientist-Digital ? Scientist- EMI/EMC, Scientist- System Design ? Electronics / Communications / Instrumentation Engineers ? Managers - Engineering / PCB design ? Engineers from electronic product company ? Design service engineers ? Electronics manufacturing Engineers Date: Friday, November 23 , 2012 Time: 9.00am to 1:00pm ( Inclusive of lunch and tea/coffee breaks) Registration cost This event is free of cost! Visit ftdautomation website Note: Due to limited ...

    $18 - $152
    $18 - $152
    0 bids

    ...prices could be changed on a branch basis or in a general basis (affecting one or every branches) - The software UI could be in spanish OR you can write it in english and prepare it for translation, for example putting all the text of the UI in an configuration file or something similar. - Simple but modern UI based on CSS. You could use open source or free CSS frameworks and CSS templates Instrumentation: - Java Play! Framework ( if you have another java framework in mind tell me and I will decide if you can do it with that ) - MySQL database is preferred, if you prefer Oracle or Postgres tell me - HTML 5 - CSS If you do a good job there is a high rate of possibilities of being rehired in next weeks to do changes to the same software. You have to do it in 15 days....

    $633 (Avg Bid)
    $633 Avg Bid
    13 bids

    ...in the process of welding up part, setting up fixtures, etc…………….. 6) Product, which is backed up by our quality control program Quality Control Program is designed to make sure that the physical product stay within tolerances based on the drawing specifications, which then can be assembled as one with no overlaps or physical interference will occur. (flash pictures of measuring devices, instrumentation, calibration methods etc.) 7) Delivery or installation of the product 8) Customers feedback - having the customer feel out a product production form, which will give information to our engineering and manufacturing facility that can improve our process in developing a better product. NOTE: the video should only run approximately 2 minut...

    $766 (Avg Bid)
    $766 Avg Bid
    14 bids

    I have built a circuit for operating a photodiode in close to zero volts and measuring the photocurrent that comes off the photodiode. Right now I have a light signal of ~80 mV and a dark signal of less than 5 mV. The high signal has a signal to noise ratio of 19:1, taken from my measurement of standard deviation of signal of ~ 4 mV, which may include noise from the stability of my light source. I need to take my output signal and amplify it to a maximum of ~4 V, without introducing (much) more noise. I would prefer to do so using inexpensive parts, and using the same Arduino setup (see below). Current schematic is included, however the photodiode is in fact an Edmund Optics UV-enhanced response silicon detector part # NT57-509 and the quiescient current selector of the ICL7611 is set t...

    $135 (Avg Bid)
    Featured
    $135 Avg Bid
    5 bids

    I'm de...Programs Enumerator. Similar to above, no controller needed. I need a list of the programs installed. I need the Name, Publisher, Install date, Size, Version and location and a byte array with the icon. No WMI! #5 - A disk enumerator. Just list the disks and drives installed in the computer. The info needed is assigned letter, Type, Size, Available Size, and File System. Again, Windows Management Instrumentation (WMI) should NOT be used, this is a requirement that my client has asked and that I already agreed. I know how to do this, I need this help because I don't have enough time to finish in time. Bid only if you know how to work with PInvoke. Let me know your experience with this and how many days you need, I need this ASAP, 4 days, if you need more time, let ...

    $276 (Avg Bid)
    $276 Avg Bid
    7 bids

    Looking for freelance trainer in the field of Process Automation | Electrical | Mechanical | Instrumentation Process Automation Programmable Logic Controllers (PLC) Allen Bradley : PLC 5 / Micrologix series / SLC Series / ControlLogix Siemens : S5100U / Step 7 200 / Step 7 300 / Step 7 400 Schneider Electric : Modicon TSX Micro / Quantum / Premium / M340 GE Fanuc : 90 – 30 Series / VersaMax Omron : CQM Series Mitsubishi : Q Series & Fx Series Messung Systems : Nextgen 5000 ABB : AC 500 & Advance Distributed Control System (DCS) Emerson : Delta V M40 Controller (Only in India) Yokogawa : CS 3000 ABB : Freelance AC800F & AC700F ABB : ABB 800xA (AC 800M) Honeywell : Experion C2000 Siemens : PCS 7 Allen ...

    $549 (Avg Bid)
    $549 Avg Bid
    11 bids

    I'm looking for a logo for use on our marketing materials for an analysis service called OptiKal, which applies mathematical calculation to stored information about industrial instrumentation in order to reduce the requirement for calibration. I'm looking for a logo that relates in some way to the product, its name or the area it's concerned with (i.e measuring instrumentation). Will want the result as vector graphics (svg) file so we can modify & scale etc. as we wish.

    $0 (Avg Bid)
    $0 Avg Bid
    2 bids

    I need someone to write research proposal on given topic. The topic is related to Management field with focus on education Management. Candidate must be native and proficient in English. Preference will be given to Academic ...aware about proposal requirements - Few headings of the proposal are: 1. Introduction 2. Background of study 3. Problem Statement (At least 3 pages with academic references) 4. Research Aim 5. Research Objectives 6. Research Questions 7. Significance of study 8. Literature review (At least 12-15 pages) 9. Research methodology (At least 12-15 pages with academic references and instrumentation) The total assignment is around 30 pages excluding references and appendix Deadline for submission is 2 October. You have to provide progress after ever...

    $247 (Avg Bid)
    $247 Avg Bid
    18 bids

    See detailed reqs. ## Deliverables Hello, The idea behind this project is as follows: 1. Since DefWindowProc() which resides in is already mapped into my process's address space, it must be possible to examine, copy, relocate etc. parts of the DefWidnowProc() function. 2. Given (1) the proposal here is to write a function which - perhaps using a library such as - when DefWindowProc() is called for the first time with a given message value (DWORD_PTR) sized second param, logs every instruction (machine code level) that is executed right up to the point that DefWindowProc() returns. 2a. The actual machine code sequence is stored in VirtualAlloc()'d executable memory. 3. It should then be possible to identify where DefWindowProc() compares the UINT me...

    $500 - $1400
    $500 - $1400
    0 bids

    ...field sensor & Total field Magnetic sensor, which takes readings from three simultanious directions to get an accurate orthogonal picture. This is for a hand held. It will not have any leads in the ground. All measurements must be taken from the air, while walking, driving with the hand held or mounted detector. The detector will also need to have a speaker and headphone jack for sound, and instrumentation built into the detector to use without a laptop computer plugged in just so I can do some on the move spot detecting without saving the data or seeing it in 3D. The metal detector must be able to output signal through a USB port that can be used by a computer program. The output must be the correct voltage, amperage, etc... for a computer to be USB plugged into the detec...

    $100 - $150
    $100 - $150
    0 bids

    The attached script offloads memory cards (SD/CF) to a predefined directory on my laptop. It works fine, but there are a couple of things that need to be fixed, and I want to improve the script....need to be fixed, and I want to improve the script. Currently, when I run the script - it reads the memory cards on my system just fine, but doesn't show the storage limits (free/available). Also, I get the error "Invalid number. Numbers are limited to 32-bits of precision." -- This is the most important thing that needs fixing. You need to possess knowledge of Windows Management Instrumentation Command-line (WMIC) - don't bother to bid if you don't have any experience with this. Once I see you can fix this, I want to work with you on improving the s...

    $30 - $100
    $30 - $100
    0 bids

    Require original music composed and recorded for 30 second commercial. Commercial is fun animation and also will be shown in as 15 s...recorded for 30 second commercial. Commercial is fun animation and also will be shown in as 15 second version. Theme - think Dr Evil scene from Austin Powers / James Bond evil villain explaining his grand plan to take over the world . So.. moody start moving into brisk move ending in Action Spy sting at end (not a James Bond copy please) Final recording should feature authentic sounding instrumentation. Bids without links to examples will not be accepted. This is for small client for local (not national) television in Australia only. Sorry, not a big budget but its such a fun job I thought someone out there might like to do it, m...

    $115 (Avg Bid)
    $115 Avg Bid
    40 bids

    Need a control system expert ,preferably a recent graduate in electronics or instrumentation to assist in a simple project

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    6 bids

    Need a control system expert ,preferably a recent graduate in electronics or instrumentation to assist in a simple project

    $125 (Avg Bid)
    $125 Avg Bid
    24 bids

    We are looking for someone to create an approximately 4 minute backing track that has instrumentation as close as possible to this song, complete with all the instrumental parts (no vocals at all, not even background): Please include details of other backing tracks you've created. We need this as soon as possible, so please tell us how quickly you can create it too, along with your bid.

    $173 (Avg Bid)
    $173 Avg Bid
    18 bids

    analog signal is taking from human body giving to instrumentation amplifier then to filters then analog to digital conversion software code for signal processing and gui

    $226 (Avg Bid)
    $226 Avg Bid
    3 bids

    The envisaged survey is intended for a significant number of users over a significant period, and it is important that the instrumentation is robust and works perfectly. We would assist by liaising closely with the provider at the outset in terms of building in the functionality sought for the survey and result report. Since time is somewhat of the essence, we need someone who already has a level of this kind of current experience. · A ball-park $$ estimate for building a multi rater survey, fully automated for responding and reporting, and liasing with us to attach to our current website. including the following functionalities: · Four groups of respondent assessment sources of feedback: ‘Colleagues’, ‘Other’, &l...

    $1219 (Avg Bid)
    Urgent
    $1219 Avg Bid
    10 bids

    i try to solve any type of doubt related instrumentation Eng ,electronics,and automation.? Proficiency in preparation of all deliverables like instrument index, datasheets, wiring diagram, location plan, layouts, hookup diagrams, cable schedule, selection of instruments, ordering & procurement of instruments, inspection of instruments, PLC, SCADA & HMI Programming. Configuring and programming various plant equipments; maintaining and modifying the logic programs on PLC Systems. Identifying areas of obstruction / defects and conducting service and repair to rectify the equipments through troubleshooting tools.

    $81 (Avg Bid)
    $81 Avg Bid
    7 bids

    i need a good instrumentation technicician that can help me with a few assignments

    $30 - $5000
    $30 - $5000
    0 bids

    I need contemporary music instrumented for a british style brass band. I do this for a living but does not have time t... Sibelius and engraving in general. When you apply for the job, please send 2 samples of your work as Sibelius files. Preferably in both romatic and contemporary style. Conditions: - Music is approx 10 min - Original file is in Sibelius 7 format - The new file should also be in Sibelius 7 format - Original setting is standard Dutch Fanfare instrumentation - The new file should be in standard british style brass band instrumentation - Use dynamics and articulations as in the original file - Both score and parts must look good and be printable/readable without further editions - The work must be finished in three days The original Sibelius ...

    $216 (Avg Bid)
    $216 Avg Bid
    3 bids

    ...is not supported in IE8 and IE9 and may be prevented in IE10. Clicking on the icon would update the status of the icon. Communication between open IE tabs is required ? Eliminate the icon and display a feedback through the system tray or another alternative mechanism ? Develop a way to do the current UI (dynamic icon in the address bar) but without DLL injection. ? Implement product instrumentation for user to opt into sending support diagnostics to Abine ? Port to Win8, porting to MetroApp is not in scope at this time. ? Develop an effective mechanism to test the code, especially edge cases not normally seen by developers or QA: o Controlling allowed and blocked requests with: * Multiple tabs in one window * Multiple tabs to the same domain in one window, one wi...

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    3 bids

    We are currently seeking for Freelance Instructors to help us meet our client's growing needs on the following disciplines: 1. Mechanical Engineering 2. Electrical Engineering 3. Instrumentation and Process Controls 4. Oil and Gas 5. Petrochemical Industry 6. Cement Manufacturing 7. Aluminum Manufacturing 8. Iron and Steel Manufacturing 9. Reliability and Maintenance 10. Transportation Engineering 11. Chemistry and Laboratory 12. Industrial Management 13. Project and Contracts 14. Supply Chain Management 15. Vocational Workshop If you are interested to join our team, please send me an email at or .

    $625 (Avg Bid)
    $625 Avg Bid
    2 bids

    ...phone will relate to the position of the nose of the plane. Tilt phone toward you and the nose goes up, away from you and the nose goes down. Similarly tilt sideways and the plane turns and according to the back and forth tilt it will turn left or right and an angle of either up or down. The main view will be of looking out the cockpit window of the plane and there will be no need for working instrumentation, just the a few dials that look like they work. Speed can be increased and decreased by pushing the lower left and right corners of the screen similarly the landing gear can be lowered by pushing the top left. The basis of the game would be to start in an easy to fly aircraft such as a single prop Cessna with flight conditions easy as well, clear skies, minimal wind. As yo...

    $547 (Avg Bid)
    $547 Avg Bid
    10 bids

    We need a plugin and widget for Wordpress, that can make an advanced search through all the products in Woocommerce ...pick a grade and pick a number of players. When adding a filter the customers sees how many titles will be displayed. The plugin has to be adjustable in style (css) with the existing template. On all pages we want also to display a widget with this advaced search, but with not all filter options (in the admin we must be able to choose some of all filters, for example only category, grade and instrumentation). At the bottom there must be a link to the page where the full advanced search is displayed. The widget has to be adjustable in style (css) with the existing template. The plugin and the widget have to be in the admin op Wordpress, so that all settings can be d...

    $734 (Avg Bid)
    $734 Avg Bid
    8 bids

    ...and promote services range. ? Provide pre-sales technical assistance and product education. ? Offer after-sales support services. ? Create technical presentations and product demo. ? Solve client problems. ? Coordinate with our sales personnel. ? Conduct product testing. ? Prepare product updates. **Qualification, Skill and Experience:** ? Bachelor Degree in Engineering / Instrumentation & Control / similar ? A background in sales is an added advantage ? Experience in ABB PLC's, SCADA and AC/DC Drives ? At least one year working experience in the related field ? Proficient in English, with little or no accent ? Computer literate ? Well-versed in C, C++, PLC Languages ? Have good sound judgement and business sense ? Have the ability to ...

    $165 / hr (Avg Bid)
    $165 / hr Avg Bid
    9 bids

    I am currently working on my dissertation proposal but i am struggling with chapter 3 Please i am in dire need of your help for my chapter 3.. I need your help for the following services Proposal Phase Help setting up the problem statement Purpose of the study Instrumentation Research questions Population and Sample Help with Hypotheses Written Data Analysis plan Power Analysis Sample Size Justification Statistics Coaching Results Section Data Analysis Using SPSS Written Report of Results Tables and Graphs Statistics Coaching

    $425 (Avg Bid)
    $425 Avg Bid
    16 bids

    Top instrumentation Community Articles