My recent searches
Filter by:
    Job State
    5,642 jde cnc jobs found, pricing in USD

    - Wooden deck with integrated electronics and battery (same as before but different front and back) - 360 degree suspension caster - 8 inch caster wheels - Must be able to CNC all of the caster parts Inspiration: - Suspension: - Streetsurf:

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    Make 3D drawings on the info provided Break them down into parts 2D AutoCAD for CNC cutting

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    1 bids

    Raspberry pi will be the brains for this project and connected to Arduino via i2c. Modules are multicoin coin acceptor, bv20 bill acceptor, tm1637 7 segment display (4 and 6 digits), mpr121 capacitive touch sensor for keypad, sd card, cnc shield (gbrl), servos Python, c++, sqlite (peewee orm)

    $313 (Avg Bid)
    $313 Avg Bid
    12 bids

    I need a freelancer for drawing a car frame for that i want product with CNC machines(laser,bending)

    $1131 (Avg Bid)
    $1131 Avg Bid
    36 bids

    Simple task. Need expert 3d for cnc logos. budget is fixed 40$. Two logos.

    $69 (Avg Bid)
    $69 Avg Bid
    14 bids

    I am looking to create some custom kitchen cabinet doors using plywood. I need help producing the CAD files that will be used with the CNC routing machine. I will be using full sheets of plywood (dimensions: 18x2440x1220mm). There are 3 different sections that will need to be cut. Here are the dimensions (in mm): 800x600 (4 pieces) 800x300 (2 pieces) 800x400 (2 pieces) 100x1960 (2 pieces) 800x450 800x150 400x600 I believe it will be possible to fit all of these cuts within 2 full sheets of the plywood. I had a rough go at laying them out the pieces myself: It was recommended to be that there should be a distance of 15mm between pieces. The plywood will have a grain in one direction and it would be best if all the pieces that share will go next to each other share the

    $83 (Avg Bid)
    $83 Avg Bid
    45 bids

    Dear Maggie, Please see the quoted price as attached for Design 1 to Design 7 except Design 2. As Design 2 has two complex design and I will quote after this Design 1 to Design 7 completed. I think Design 2 need to do some study further before kick start. If you have clearer vector outline I can duplicate the same for you.

    $222 (Avg Bid)
    $222 Avg Bid
    1 bids
    Metal Lamps 1 day left

    Would like these drawings re drawn and change the raster image to vector image using simple arcs and straight lines. I have 5 different lights that we will be cutting out by cnc lazer. Each line on the bottom side of each light will need to be 1.5" wide to allow a glass panel to fit in the openings. Each drawing will be redrawn by myself to make the positive and negative space clear. I have all dimensions. I would like the 5 different lights in DWG file ready to cut out by the cnc. I have flat images of each panels. If this is a project that you would be able to draw completely, please let me know or ask any other questions.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    41 bids
    Python developer 15 hours left

    ...0.9) software in our company which is designed on Python (we can explain you more about bCNC software). Our version of bCNC is run on Python 2.7.16 only. Please We will send you the file of bCNC in Zip format. In that folder there are many python files. We can send you installation method also & it is very simple. Requirements: So basically, we want to run coolant commands automatically by using CNC code (which are M8 for coolant ON & M9 for coolant OFF) with "RUN" & "PAUSE" button accordingly. For example, when operators click on "RUN" button so coolant should be ON automatically & when operators click on "PAUSE" button then Coolant should be OFF automatically & it should be automatically ON also as the operator clicks ...

    $104 (Avg Bid)
    $104 Avg Bid
    6 bids

    Hello there! I need someone to do the following tasks - Job 1. For a given part drawing (fig.1) prepare manually CNC program. The material of the blank is low carbon steel. Job 1.1. Choose appropriate cutting tools for roughing, finishing, grooving and threading, using the tool selection guide of Sandvik Coromant. Job 1.2. Choose appropriate cutting conditions (cutting speed, feedrate, depth of cut), when using cemented carbide insert tooling. Draw the selected cutting tools. Job 1.3. Calculate spindle speed. Job 1.4. Select appropriate CNC Lathe using available catalogues. Job 1.5. Make the Geometric plan (part drawing, machine zero, reference point and start point). Job 1.6. Write program manuscript. Job 2. For a given part drawing (fig.2) prepares a part program for a wi...

    $10 - $30
    $10 - $30
    10 bids

    I will send you the specification, limitation and configurations of my CNC machine. You design Psalms 91 and import the picture, create the cursive handwriting with the toolpath i give you, configure the g-code that is transferable via the internet into Mach3. You will have to work with me until the g-code is adjusted to produce no mistakes and an optimum end result wall plaque. You will not get paid if you are unable to deliver a mistake free g-code to Mach3.

    $145 (Avg Bid)
    $145 Avg Bid
    3 bids

    need a list of cnc machining and fabrication buyers their decesion makers to whom i can send my services to we need people who require cnc machining

    $20 (Avg Bid)
    $20 Avg Bid
    4 bids

    quick wix website like 3d hubs which takes in an attachment BtoB manufacturing marketplace I-MAN send your CNC machining , programming and fabrication RFQS here and our suppliers will quote you asap!! as this is for research purposes very low on budget

    $76 (Avg Bid)
    $76 Avg Bid
    7 bids

    you will get 100 percent commission for the work done because we are new and in research phase right now its a (BtoB manufacturing marketplace I-MAN send your CNC machining , programming and fabrication RFQS here and our suppliers will quote you asap!! )

    $155 (Avg Bid)
    $155 Avg Bid
    6 bids

    Autocad desiner and cnc fiber laser cutting operator

    $75 (Avg Bid)
    $75 Avg Bid
    20 bids

    We are about the start a new development for our SMART CNC machines. We have Siemens LOGO! 8.3 and Siemens S7 as PCT, RMS power monitoring anlolgue sensors, vibration analogue sensors and we would like to visualise and store the real time data.

    $32 / hr (Avg Bid)
    $32 / hr Avg Bid
    13 bids

    Objective: I need help completing a nearly-finished product design, and with getting the first batch of the product produced. This is a fabricated steel component, consistin...subcontractors who will manufacture components: (2a) Steel tube that is bent and cut (2b) Steel that is turned on a lathe and threaded (3) Create 3D CAD model of fixtures for production: (3a) Fixture to hold tubing so that it can be mitered in a CNC mill (3b) Fixtures to hold steel components in position for welding - proper orientation and positioning is critical Production Process: We will have a supplier cut and bend steel tubing, and turn a component on a lathe. In-house we will use our CNC mill to miter the tubing. In-house we will then wel...

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    29 bids

    Hi Leandro, Please design a web slider for the CNC site. I'll send you the content and graphics. Kathy

    $45 (Avg Bid)
    $45 Avg Bid
    1 bids

    We have a Mitsubishi Corp LT-400M lathe and need someone to program to run a couple of production jobs on it.

    $1200 (Avg Bid)
    $1200 Avg Bid
    6 bids

    Enhancements on gantry system 1. add 50% Width on all 3 parts from the initial Version one of the model 2. enhnhamce part3 so it grips on to the RHS on booth sides 3. enhance part2 to grip on to the RHS on booth sides (rough sckatch attached ) 4. make the clearance speacing b/n the 608 bearing and the plates 6mm*** 5. Part1 (the center hole) should be at list 38.3

    $15 (Avg Bid)
    2 entries
    Trophy icon Design Me a Logo Ended

    Hi I'm looking for someone to either redesign a logo for me or modify my current one to look more appealing. I am thinking along the lines of something 3D in more of a grey colour, maybe grey background with chrome writing? My business manufactures and sells performance aftermarket automotive/car/motorbike parts using CNC mills and lathes. I would like the main writing to be "PSI" but will also need to include my business name "ProStreet Innovations". I would like to engrave the logo into my parts. I have attached the logo that I came up with and like, but feel it could be better. Also open to different ideas.

    $21 (Avg Bid)
    131 entries

    ...biggest manufacturers of forklifts and material handling equipment in China. Located in Lu'an City, Anhui Province, it covers an area of 67,000 square meters of forklifts production workshops and has more than 30,000 square meters of standardized workshops for the production of material handling equipment. We have different kinds of large blazing cutter, plasma cutter, large punch machine, CNC machining center, large painting machine and other highclass machines and testing equipment, which ensure perfect quality of each product we produce. Now our products include counterbalance diesel forklift, electric forklift, gas/lpg forklift, terrain rough forklift, hand pallet truck, electric pallet truck, electric stacker and reach truck etc. In 2019 we have passed the str...

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    15 bids

    I want a study for CNC machining of spirl bevel gears with GibbsCam software the study with: All GibbsCam files (tools library, complete project files) machining simulation

    $14 (Avg Bid)
    $14 Avg Bid
    3 bids

    Hi there, We need marketing executive for our design department. We are doing Millwork design, Shop drawings, Joinery, CNC programming etc. If you are interested please submit your proposal. More detail in chat. Thanks

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    9 bids

    need to interface lcd 2004 with encloder and sd card and arduino board to operate cnc with gcodes(Grbl). I need Arduino programs and circuit diagram as well. I need to jog stepper motors from lcd and it will also read gcodes from sd card to run.

    $40 (Avg Bid)
    $40 Avg Bid
    5 bids

    I just need the code for these simple products

    $13 (Avg Bid)
    $13 Avg Bid
    9 bids

    I need a designer to design a dog kennel similar but not exact to the photos attached. I need detail blueprints in order to put the product into production.

    $140 (Avg Bid)
    $140 Avg Bid
    57 bids

    Essential Roles: 1. Develop/Modify JDE standard and custom reports, applications, tables, business views, dara structures and business functions. 2. Document Requirement, technical design and specifications. 3. Review and analyse business requirement and develop solutions using JDE1. 4. Coordinate/lead projects with independent contractor and vendor consultant. 5. Perform unit testing to ensure applications and processes work as expected. 6. Analyse and troubleshooting system processes. Minimum Qualification - 3-5 years as a JDE programmer Analyst and developing JDE business solutions in 9.2 environment.

    $471 (Avg Bid)
    $471 Avg Bid
    1 bids

    Looking to have a linear rail gantry design for my DIY CNC, the system has already been designed by other designers with the rail used being a 50 by 50 RHS, I want this to be redesigned for a 40 by 60 RHS and few more modifications Design is for metal laser cutting and metal plate to be used is 4mm thick. Need a 3D model for ilustration and a DWG for laser and plasma cutting PLEASE SEE THE ATTACHED DOCUMENT BEFORE OFFERING YOUR ENTERY !

    $50 (Avg Bid)
    14 entries

    Looking for someone to do drawing and CNC code using Autodesk fusion. Due to good responses to this project, and lots of questions I am adding detail to my proposal. This typically involves converting an image to dxf that is clean so that it can be cut. Fusion 360 converts the dxf to .tap file. I use a Crossfire plasma system and Hypertherm PM85 plasma. Video tutorials are available on Langmuir website. I use Mach to operate the CNC machine. Currently I am limited to 500 lines of g code so at times I make several .tap files for finish a part. My hope is to find someone who can make clean .tap files that are ready to cut for a reasonable cost. Budget is perhaps $10-$20 CAD for a typical name monogram. All that is required is to add text, explode it and trim any l...

    $325 (Avg Bid)
    $325 Avg Bid
    31 bids

    Jewellery piece will be CNC milled from black ceramic. Add loop at top that will fit necklace through. Trace logo lines as notches in material. Write name "Malin" in script font in the back.

    $121 (Avg Bid)
    $121 Avg Bid
    20 bids

    We need to show to a GD&T expert our drawings and tell us if they are correct or what improvements do we need to avoid mistakes during the CNC machining process.

    $41 / hr (Avg Bid)
    $41 / hr Avg Bid
    37 bids

    We wanted to develop invoice template using JDE BI publisher using embedded word template.

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    1 bids

    I am developing a kit-of-parts construction kit to be cnc cut from plywood sheets. I need a script that I can run to help me check for screw-hole misalignments in adjacent families in the project. A manual check will be time consuming and error-prone.

    $1388 (Avg Bid)
    $1388 Avg Bid
    6 bids

    Profile required: CNC machining on 5-axis milling machine CAM programming Dimensional control Work with AlphaCAM Your qualities: Flexible and autonomous for the realization of projects directly with the customers Motivated, inventive, showing initiative and analytical skills Ability to work in a team, rigorous, organized and responsible

    $38 / hr (Avg Bid)
    $38 / hr Avg Bid
    10 bids
    $93 Avg Bid
    1 bids

    it's a small task just convert slt file to g-code for cnc machine

    $18 (Avg Bid)
    $18 Avg Bid
    8 bids

    I have pictures of a couple of small metal parts and I need someone to 3D design those so that I can make them using CNC . So I need the design files.

    $24 (Avg Bid)
    $24 Avg Bid
    52 bids

    Need to prepare 2 nos of aluminum box of size 300mm x 300mm x 100mm with 10mm Plate, its also required to prepare some grew & holes with the help pf CNC/VMC machine. it should look like attached image however i need complete plane not any ups & down

    $257 (Avg Bid)
    $257 Avg Bid
    35 bids

    Cases of electronic devices, mainly made of metal. Sometimes it is necessary to make a g-code for prototyping on a cnc machine

    $139 (Avg Bid)
    $139 Avg Bid
    16 bids

    Please see attached Visio file. Two waterblocks, which are mirror of each other, each block consisting of a 0.5" aluminum plate with path edged out for water cooling, and a 0.25" acrylic plate to cover. I need this in a format that I can use to submit to a CNC factory. I need someone who can copy the design to Fusion360 or similar, and "full-proof" my design, or make recommendations, based on experience. attached a picture of a similar design, to give the idea of what it'll look like.

    $172 (Avg Bid)
    $172 Avg Bid
    18 bids

    We need higher capacity for peanut IN-Shell drying Therefore we need drying silos. We already have glass fiber reinforced rings - inside diameter = 2m - wall thickness = 1cm - height = 2,7m Those rings are at the top and the bottom open What we need - see picture Sample1 (1 Red - glass fib...the rings on the top), on the side there should be place for an air blower - the conection therefore should be 30cm in diameter Sample see picture - Sample2 Also a electrical controlled moveable floor for outlet - 45° - See picture Sample3 and Sample4 The maximum load will be 2,5 tons. Those silo will be placed on a flat concrete ground. You should use everykind of CNC laser cutter (bed and tube laser) also CNC milling and CNC Turning for construction. I hope everything is ...

    $1114 (Avg Bid)
    $1114 Avg Bid
    18 bids

    Hi Required persons for CNC lathe technical drawing project designing. Some simple drawing not too much complicated.

    $16 (Avg Bid)
    $16 Avg Bid
    30 bids

    I'm after someone familiar with 3D modelling, to take an image and create a 3D file in either .STL or .OBJ formats for use in our VCarve Pro software. I'm particularly looking to create a model for a traditional Maori paddle/oar, overall length being approx 1200mm. One side of the face of the oar is fairly flat, the opposite side is to be raised/contoured like a usual paddle. The neck could be round, or square with rounded edges I have also uploaded some images of examples. If this goes well, we'll use the successful designer again to create more 3D models for other traditional Maori hand held objects.

    $15 (Avg Bid)
    $15 Avg Bid
    18 bids

    I am looking for someone that I can work with weekly to create code that would be loaded into my 4-Axis Software on my hot wire cnc machine. I need to create 3d objects such as animals. I will attach some photos.

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    8 bids

    The CNC Programmer is responsible for crafting quality precision metal parts according to their CAD designs using CAM software required by the machine.

    $23 (Avg Bid)
    $23 Avg Bid
    12 bids

    2- Axes CNC machine, need vertical stage base plate and stage assembly on solidworks and cad drawings as well

    $99 (Avg Bid)
    $99 Avg Bid
    50 bids

    1. Develop/Modify JDE standard and custom reports, applications, tables, business views, dara structures and business functions. 2. Document Requirement, technical design and specifications. 3. Review and analyse business requirement and develop solutions using JDE1. 4. Coordinate/lead projects with independent contractor and vendor consultant. 5. Perform unit testing to ensure applications and processes work as expected. 6. Analyse and troubleshooting system processes. Minimum Qualification - 3-5 years as a JDE programmer Analyst and developing JDE business solutions in 9.2 environment.

    $337 (Avg Bid)
    $337 Avg Bid
    1 bids

    I would like a multi-class Mastercam course for CAM and CNC. I want a course from scratch, starting from scratch to complete and advanced exercises at the end of the course, to master the subject of CAM, CNC and of course the software usage. The minimum total duration of the course with all classes must be at least 2 hours.

    $79 (Avg Bid)
    $79 Avg Bid
    6 bids

    Hello, Looking for someone who is experienced in CNC machining, who is knowledgable on the tools needed, toolpaths & designing on fusion 360 This will be ongoing work on multiple projects for multiple business’s that we are starting with our CNC machine.

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    26 bids