Raspberry pi arduino emulator jobs

I'm in need of an experienced web3 developer who could integrate a wallet with my website on the Binance Smart Chain network. Key responsibilities: - Enable making transactions via the website, which includes: - Sending tokens - Receiving tokens - Approving transactions - Facilitate checking balances on the integrate...showcase a significant track record in web3 development, particularly in Binance Smart Chain integrations. Proficiency in working with wallets and facilitating seamless transactions is paramount for this project. A sound understanding of blockchain networks and their working will be immensely beneficial. Please only bid if you can make test directly on binance smart chain. we are going to use the Pi Network DeFi token to test the integration on my webs...

I have Arduino code and a svc model and I’m using a application called Blynk for visualization I want to send the reading of the moisture sensor to the svc model as an input for prediction and send the prediction back to the Blynk or Arduino so if the output is 0 it stop watering and if its 1 it start watering

I have Arduino code and a svc model and I’m using a application called Blynk for visualization I want to send the reading of the moisture sensor to the svc model as an input for prediction and send the prediction back to the Blynk or Arduino so if the output is 0 it stop watering and if its 1 it start watering

I need a professional to connect my OAK PoE camera with a Raspberry Pi 5. I have the camera working perfectly fine on my DELL computer. However, I'm unable to use the camera with my Raspberry Pi 5. This is what I've done so far. 1. I first installed the pip3 and Python 3 Virtual Environment by running. - sudo apt install -y python3-pip python3-virtualenv 2. I then created and activated the Virtual Environment by running. - python3 -m venv projectsenv - source projectsenv/bin/activate 3. Then I installed opencv while inside the virtual environment - pip3 install opencv-contrib-python 4. After that I installed the depthai dependencies for Linux (still in the environment) - sudo wget -qO- | bash 5. Then I installed depthai (still in the

I need a professional to connect my OAK PoE camera with a Raspberry Pi 5. I have the camera working perfectly fine on my DELL computer. However, I'm unable to use the camera with my Raspberry Pi 5. This is what I've done so far. 1. I first installed the pip3 and Python 3 Virtual Environment by running. - sudo apt install -y python3-pip python3-virtualenv 2. I then created and activated the Virtual Environment by running. - python3 -m venv projectsenv - source projectsenv/bin/activate 3. Then I installed opencv while inside the virtual environment - pip3 install opencv-contrib-python 4. After that I installed the depthai dependencies for Linux (still in the environment) - sudo wget -qO- | bash 5. Then I installed depthai (still in the

Setup: 6 amp Stepper Motor With External Micro Controller. Two Buttons (switches) Desired Action: Press and release button #1 motor CW, accelerates and travels to an assigned location, decelerating to a stop. Pressing this button a second time will stop the motor. Press and release button #2 motor CCW, accelerates and travels to an assigned location, decelerating to a stop. Pressing this button a second time will stop the motor.

More details: What is the primary reason for encrypting the Raspberry Pi 4 OS and inside files? Protect sensitive data What encryption level do you require for your sensitive data? 256-bit encryption Are there specific files or data types that need to be prioritized in the encryption process? Program and System Files

More details: What type of communication method would you like the smart watch kit to use? GSM Do you want to send only text messages or multimedia messages as well to the smart watch? Only text messages What type of phone will you be sending messages from to the smartwatch? iPhone All I require is a code which enables me to send messages from my iphone 11 onto this Arduino board.

We need to develop a unique exterior design for a Raspberry Pi case that incorporates the company's colors and logo, ensuring easy connection to the relays found on the RPI Relay board. The Raspberry Pi will be installed inside the case and does not require IP65 protection. The back of the case should feature two small notches for wall mounting using 2 stops. All ports need to be accessible.

I'm in need of an Arduino ESP32 BLE Beacon that can help me locate my position. Its key function will be to triangulate its position based on three central beacons in an indoor environment. Key Requirements: - The main goal of this project is to create a beacon that allows me to know my position inside indoor spaces, such as offices and warehouses. - The system should be designed to provide a medium level of precision in position tracking, with an accuracy of up to 5 meters. Ideal Skills and Experience: - Proficiency in Arduino and ESP32, with a strong understanding of BLE (Bluetooth Low Energy) protocols. - Prior experience in designing and developing beacon systems for positioning. - A solid understanding of indoor positioning systems and the challenges they may p...

In this exciting project, I'm looking for a freelancer gifted in system integration to apply Arduino-powered robotics interfaced with IoT devices. Your role includes: - Implementing well-structured Arduino programming concepts dedicated to robotics. - Leveraging your strong background in system integration. - Using your extensive experience with IoT devices to smoothly integrate them with the Arduino robotics. A working knowledge of robotics design and construction is beneficial, but not necessary. Only those with proven experience in similar projects, particularly involving Arduino and IoT interconnection, should apply. I'm excited to see your creativity at work on this project.

...ready, into an existing C++ codebase designed for ESP32 arduino. Here is the specifics: - Integrate user authentication functionality, file input/output, and error handling into the previous codebase. - Implement RTCM messages code for real-time positioning corrections, data integrity checks, and network communication. The successful candidate will ideally have the following skills and experience: - Proficiency in C++ programming, including libraries and message coding. - Extensive understanding of RTK library and RTCM messages. - Experience with ESP32 Arduino. - Strong troubleshooting and problem-solving abilities. The original code is completed. All you need to do is adjust and ensure its seamless operation with the ESP32 Arduino code. Your work is vital in e...

I'm seeking a skilled developer with experience in C++ for a project involving the Raspberry Pi. The task at hand is to create an application that can take a 50Hz 1024x640 video stream from a remote URL and display it on a local monitor through the HDMI output. Key Requirements: - The application must ensure the playback of the video stream without dropping frames. - The latency between the incoming video stream and its display on the local monitor should not exceed 2 frames. Ideal Skills and Experience: - Proficiency in C++ is a must for this project - Prior experience working with Raspberry Pi would be a significant advantage - Experience in real-time video streaming and low latency applications would also be highly beneficial. Please note that the...

...solution, I'm seeking guidance from a skilled freelancer experienced with both Raspberry Pi and Asterisk server setup. Key Project Details: - I do not require a full-fledged PBX setup, just a basic VoIP service facilitated through my Raspberry Pi. - The primary feature I'm interested in implementing is voice calling. Required Skills: - Proficiency in configuring an Asterisk server on Raspberry Pi. - Strong understanding of VoIP and related protocols. - Ability to guide and explain the setup process clearly. Your Role: I've tried to set it up but no voice can be heard on the other end. So this task is mainly a trouble shooting job. Your primary role will be to walk me through the setup of Asterisk on my Raspberry Pi...

Have original dongle for a software with us. We need to either create soft copy and use system without hard dongle or make copy of hard dongle with new one.

...from Raspberry Pi 5 to a PC over a static network configuration. The project involves an underwater camera and sensor data. Tasks include: Supply Python client and server scripts on a PC and rpi5+camera over a static IP network connection. Using the picamera2 module to stream video to PC. The video is recorded on the PC (time stamp for file name), with text overlay on the video showing PC date and time. UDP for simple 2way communications of small 'hello world' type text strings between the RPI5 and PC. Happy to control everything from the python script on the PC at present with a simple window for viewing the video. No GUI required at present. You should have a deep understanding of Python, experience with video streaming and data transfer, and background wor...

Usando la placa de desarrollo ESP32-S2-DevKitC-1 (la que trae el led rgb), conectar a internet en modo station y hacer peticiones a un servidor de prueba (puede ser de esos gratuitos o instalarlo en el propio PC) para transmitir un dato a la internet (puede ser una cadena de caracteres). Hay que considerar que el led RGB debe usarse ...internet en modo station y hacer peticiones a un servidor de prueba (puede ser de esos gratuitos o instalarlo en el propio PC) para transmitir un dato a la internet (puede ser una cadena de caracteres). Hay que considerar que el led RGB debe usarse para indicar cuando se envía un mensaje (que use algunos colores). Idealmente debe realizarse en la plataforma PlatformIO con la herramienta ESP-IDF (NO ARDUINO). Para la placa ESP32-S2-DevKitC-1 (no...

We are seeking an experienced PCB designer to develop a custom printed circuit board for a Raspberry Pi 4 Model B application. The project requires integrating specific components and ensuring the design can be enclosed within a standard industrial box. The successful applicant must have experience with power management and GPIO pin utilization. Key Requirements: - Experience with Raspberry Pi designs and GPIO pin functions. - Ability to integrate electronic components such as 5V relays into the PCB with high precision. - Familiarity with standard industrial connectors and terminals. This project aims to create a highly functional and reliable hardware system. Only applicants with a strong track record in custom PCB designs and the ability to work to exact sp...

I'm seeking a capable programmer with expertise in using C and Atmel Studio and a good understanding of Atmel microprocessors. The pro...in using C and Atmel Studio and a good understanding of Atmel microprocessors. The project involves developing a Simple Program capable of: - Reading analog sensor values - Reading digital input signals - Controlling digital output signals Using a combination of analog and digital inputs and outputs is key to the project, so demonstrated experience in this area is required. Prior knowledge of Arduino would also be beneficial. The right freelancer should be proficient in microprocessors, specifically with Atmel typed ones, and comfortable using both digital and analog inputs and outputs. Familiarity with wireless communication protocols is ...

I need help using Squareline Studio and having arcs that are displayed on a touch screen to print their values to the serial monitor of Arduino IDE

I need a freelancer to assist me in connecting my MIT App Inventor to my HiveMQ broker. The main goal of this project is for me to gain knowledge and understanding about IoT connectivity. I have the arduino code working succssfuly when I enter the topic and the message manullay in HiveMQ broker. Now I like to use MIT App inventor to connect to broker and passes the topic & messages Key requirements: - Connection of MIT App Inventor to HiveMQ broker - Ability to switch ESP32 LED on/off Ideal Skills: - Proficiency in IoT connectivity - Experience with MIT App Inventor and HiveMQ - Strong understanding of ESP32 and MQTT protocol

Anyone help me install Revolut App on BlueStacks Emulator - need anti-detection for emulator

Project Job: Willy Datasheet: Reference Development board: Create a Custom Personalized schematic incorporating the components listed, including the Rockchip RK3588 SoC and additional peripherals, you'll need to carefully consider the connections and power requirements of each component. Here's a basic outline of how you might design such a schematic: 1. Rockchip RK3588: - Connect the RK3588 SoC to the necessary power supplies, clock signals, and peripherals according to its datasheet. 2. 4GB/8GB RAM: - Connect the RAM module(s) to the RK3588 SoC's memory interface, ensuring proper signal routing and power connections

...an experienced image processing engineer with demonstrated competency in working with the Basler camera and Pylon software. The key objective of this project is to establish a comprehensive quality control system to detect certain anomalies within the produced images. The Specific Tasks included for first milestone: 1. Write a code to collect images using a trigger for the basler camera in raspberry pi, the code is already written, need to adjust it and install necessary libraries. The Specific Tasks included for second milestone: 1. Detecting color inconsistencies within the given images. 2. Identifying any physical defects present, specifically scratches, blemishes, and cracks. Skills and Experience: - Proficiency in image processing - Knowledge of quality control...

I am actively seeking a capable developer to perform a full porting operation from Arduino-Pymite to cc65 for Commodore 64. Notably, the step requires a comprehensive skill set: - simplified version - original version • Proficiency in the usage of cc65 and familiarity with Pymite. • Exceptional attention to details to achieve full compatibility between Arduino-Pymite and cc65 for Commodore 64. • Ability to exhaustively test and debug for optimal performance. As I have not started to work on this, it's essentially a from-scratch operation. Moreover, full compatibility between Arduino-Pymite and cc65 for Commodore 64 is a non-negotiable requirement. Fortunately, I will be providing all necessary

I am searching for an experienced programmer to develop a gamepad emulator for a PC that is compatible exclusively with Windows. - You are required to create a program that will emulate a gamepad on a computer using a special driver named "ViGEm Driver" or something similar, with the main goal being for the game to recognize that we are using a gamepad. It doesn't necessarily have to be a complex program; the main thing is that it works reliably. The program should include settings for buttons (namely bindings for all the buttons, sensitivity of the gamepad, as well as dead zone settings) so that users can easily control it using a keyboard and mouse, similar to the reWASD program (please familiarize yourself with this program). - The program should also include an...

I am looking for a skilled PCB designer to create a prototype that fits within a medium-sized, 2 to 4 inch space. This PCB should be tailored to contain an Arduino Mini and a 12V to 5V buck converter, with 3 pin and 2 pin JST GH connectors. The configuration of components on the PCB should follow a clustered arrangement to maximize space efficiency. This job does not require mass production capability at this time, with the primary focus being on creating a single prototype. Ideal candidates should have experience with Arduino components and compact PCB design.

I'm seeking an experienced hardware engineer to design a robust PCB which will fully support my Raspberry Pi 3 Model B+. This PCB is planned to be a part of a control system. The main requirements for the project are as follows: • Full Raspberry Pi 3 Model B+ compatibility support - Your design should take full advantage of all the features of this model. • Control system orientation - The PCB down the line will be used as a control system, all design decisions should keep this in mind. This project requires that the PCB has a 110/240 V input and have a 5V Output and 8 Relay Out of 10V. Some basic requirements for candidates: • Strong knowledge in Raspberry Pi and PCB design is preferred. • Prior experience with networkin...

I am looking for a professional to help me with setting up my Raspberry Pi for radio broadcasting. Requirements: - Sideloading Linux: I need you to assist me with virtually sideloading Linux onto my Raspberry Pi. - Software Installation: I need you to install software that will support the radio broadcasting. This includes the necessary features for live streaming and frequency modulation. Ideal Skills: - Proficiency in Linux: You should have a deep understanding of Linux systems and how to sideload it virtually. - Raspberry Pi Experience: Experience with Raspberry Pi development is essential for this project. - Radio Broadcasting Knowledge: Prior experience with setting up radio broadcasting systems would be a huge advantage. I ...

Using 3 boards of Arduino Uno WiFi R4, and using my home WiFi network, I want to have one of the Arduinos act as the Master Controller and be able to exchange commands with the other two Arduinos (acting as clients). I am attaching a file that describes specifically the assumptions you can make, the initial configurations of the Arduino boards and the operational requirements for the Controller and each of the clients. The communication network needs to be my home WiFi and the template sketch should be very well document to understand all the parts or blocks of the code so I can tailor it to my own needs. The project should be fully tested and list or include all the libraries needed.

...builder and I'm in need of a skilled Arduino programmer to assist with a stepper motor project. I have an Arduino Uno and a CNC shield, and need help in programming them to make my stepper motor move back and forth at different times. Im building the opening scene can opener in Back to the Future. marker 2:20 This is for my cat Daisy, I want to make an automated can opener because Back to the Future is my all-time favorite movie and it would be so fun to make and have. I started 3d modeling it back in college for a project but COVID ruined my class and never got to learn Arduino... I have pretty much all the pieces and mostly figured out how everything should work. The key requirements are: - Configuring Arduino Uno and CNC shield to properly interf...

I'm on the hunt for a proficient C++ programmer with hands-on experience on Raspberry Pi and Linux environment. I'm having personal use project centered around Raspberry Pi 4 and encountering compilation errors with a certain tool that needs attention. You'll be working with Make and makefiles, so proficiency in these is paramount. Your primary task is to debug the issue, fix it, and compile the tool successfully. A proven track record of resolving similar issues will go a long way in this project. So, let's connect if you think you are a good fit for this task!

I am in need of a logo design that will help convey my identity as a...will help convey my identity as a math tutor. I've got a modern, minimalist perspective and I'm hoping for a design that mirrors these qualities. - Preferred Style: • style: I'm looking for a modern, minimalist approach to this design. • colors: I'm loving shades of blue and green. - Elements: I would love for this logo to feature some of the following elements :- • mathematical symbols such as pi, plus, and minus • geometric shapes like triangles and circles. Ideal Skills and Experience: Seeking a designer who has a clear grasp on modern and minimalist design, with a knack for incorporating specific elements to represent my profession. Experience in creating logos for t...

I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application.

...help me automate resource gathering in an Android emulator using Python. Specifically, I need someone who can: - Assist with a program that is already created, but needing polish - Use Python to create scripts that can interact with the emulator and gather resources automatically - Optimize the program to ensure that it is efficient and reliable - Test and debug the program to ensure that it is working as intended Ideal skills and experience: - Strong experience with Python programming - Experience working with emulators and game platforms - Knowledge of resource gathering strategies and techniques - Strong problem-solving and debugging skills Overall, I am looking for someone who can help me automate resource gathering in an Android emulator using Python. If y...

I'm looking for a skilled developer who can design and implement a graphical user interface (GUI) overlay for omxplayer in Raspberry Pi. We are using raspberry pi omxplayer for playing video files. Needs to overlay images and text on top of that omxplayer. The image needs to be supported jpeg, png and a transparent background. For text, it needs to be like some static text to be displayed and also needs some scrolling functions for that text.

I'm seeking a qualified mobile app developer for a cross-platform utility application. The app predominantly needs to incorporate a Virtual NFC Card Emulator. Ideal Skills & Experience: - Experience in developing cross-platform applications. - Familiarity and past working experience with NFC technologies. - Knowledge of UX/UI principles to ensure user-friendly interfaces. Project Features: - A Virtual NFC Card Emulator: This will be the key feature of the app. - User can make multiple virtual NFC cards. - The user will have to keep a button pressed then the NFC feature will be enabled and when the user brings his phone close to another person's phone the other person will get a link popup. Working and Functionality: The user will have a virtual NFC card...

I need an experienced python developer with understanding of stepper motors control to correct the bugs in my existing code that drives PI (Physik Instrumente) stepper motors via controllers. The code is currently not functioning as expected and requires professional handling. Key areas to look at include: - Handling of the plotting routine on the tkinter GUI: The challenge is in creating a reliable routine that can present data accurately. In addition, I would like to enhance the tkinter GUI with: - Basic plotting capabilities: Enable the GUI to generate simple, accurate graphs utilizing data input. - Interactive plot controls: Seize full control over the graphs generated, such as zoom in, zoom out and panning options. The ideal candidate for this project should have a strong...

...permissions for users account before the mobile device can send the request to the module to turn on/off function. 4. Integration to existing software systems to send update to database for account permissions to be assigned. This can be done via API to 2 platforms. Your main task will involve: - Developing and implementing an Arduino-based automation control system suitable for an industrial environment. Skills and Experience Required: - Robust experience with Arduino platforms; - Extensive knowledge and demonstrable experience in IoT development; - Expertise in implementing automation control, preferably in an industrial setting; - Problem-solving skills and ability to work independently. This project offers the chance to engage with specialized technology and con...

Write and read APDU data from/to an SD card using Arduino Nano.

Seeking an adept freelance developer to help me incorporate a continuously looping MP4 video into a 7'' Raspberry Pi LCD screen. Key requirements: * Proficiency in handling Raspberry Pi projects, especially involving LCD screens. * Good working knowledge of video formats (Specifically MP4) in Raspberry Pi environments. * Ability to include audio output through headphones. * No additional control features are required for this task. Please note, that the goal is a smooth, continuous video loop with seamless transitions. Relevant experience with similar projects would be highly appreciated.

For this project, we're looking to explore the capabilities of ESP32 - Arduino. In particular, we need help from developers who can demonstrate their understanding of this platform through a demo project. Looking for a simple ESP32/Wifi project for color mixing with LED lightbulb. This is a simple demo project to show WiFi connectivity using the ESP32 microporcessor Using ESP32, 64x128 oLed, one button and 3 LEDs, 10K potentiometer, 1602 LCD (non I2C) Dial in R color using potentiometer 0-255 – Press button, show brightness on RED LED Dial in G color using potentiometer 0-255 – Press button, show brightness on GREEN LED Dial in B color using potentiometer 0-255 – Press button, show brightness on BLUE LED Colors will show on individual LEDS after each button...

I need an expert in Arduino programming to develop a script for a 6.0A stepper motor, which will be used to enable the continuous running of the stepper motor in both directions, with a stop command. The motor should reach a maximum of 60 RPM. Key Features: - Variable Speed Control: The system should be designed to provide the ability to adjust the RPM between cycles progressively. Ideal Skills for the Project: - Proficiency in Arduino programming - Extensive experience with stepper motors and variable speed controls. - Practical experience in robotic arm operation would be beneficial. If you are the right fit, I'd be glad to brief you on the project.

...knowledge of graphic design (UX/UI) - are not afraid to test your developed app directly with hardware (beacons, sirens, etc.) - are solution-oriented (we don't believe in "that's impossible") - don't mind working on your own without constant supervision - keep your word and communicate openly Advantages: - experience with image processing, neural networks, and IoT concepts - knowledge of the Arduino IDE - basic understanding of communication protocols (USB, Ethernet, etc.) - project management skills - experience leading a development project - communicative English - you are ready to start right away You'll get a chance to: - directly influence the final product with your knowledge and skills - experiment and implement your ideas - continuously ...

...coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application. I have 8 year experience on Arduino and know all principles of it. I’m using Atmega chip instead of Arduino board as a platform to have cheapest solution.I’m using samples, libraries and Arduino IDE for developing any code. I have developed several codes for different kind of boards. I can do simulation by using Proteus also. Th...

I'm looking for a skilled mobile app developer to create a cross-platform app for both iOS and Android that is specifically designed to control a Bluetooth device. The app should have the following capabilities: - On/Off control: The primary function of the app is to switch on/off the Bluetooth device. - Set sp...firmware) Ideal candidates for this project will have: - Extensive experience in mobile app development, particularly on both iOS and Android platforms. - Proficient in Bluetooth device integration with mobile apps. - Strong UI/UX design skills to ensure a user-friendly interface. - Familiarity with data visualization tools for the trends functionality. - Experience in MCU programming (C language, Arduino friendly) - Experience in working with log files and file mana...

I'm in need of an experienced Arduino expert, specifically one who is well-versed in home automation projects. While your specific tasks aren't limited to, they fundamentally revolve around the following: * Writing, troubleshooting, and optimizing Arduino codes. * Designing and prototyping of Arduino circuits. Ideal Skills: * Proficient in Arduino programming. * Rich experience in home automation projects. * Demonstrated success in circuit design and prototyping. In your application, please include a detailed descriptions of your past Arduino coding experience, particularly those related to home automation. Your proven track record and experience in this field is crucial for this project success.

I need an Arduino C expert with experience in sensor integration, communication with other devices, and data logging. To meet all my project needs, the selected freelancer should have skills to integrate RFID and WiFi sensors. Primary tasks include: - Integrating RFID and WiFi sensors into an Arduino C project. - Ensuring seamless communication between Arduino C and Mobile devices/PCs. - Implementing effective data logging. This is a complex project and looking for someone who can provide realistic solutions. Proven work with Arduino C, RFID/wifi sensor implementation, and device communication enhancement will give you an upper hand in your application. Looking forward to discussing further details.

...skilled developer to help me set up an RFID attendance tracking system using a Raspberry Pi and a USB RFID reader. The system should be able to read RFID tags and record the attendance data. Key requirements: - Develop a script that can integrate the USB RFID reader with the Raspberry Pi for attendance tracking - Store the attendance data on an external database - The external database should be an MS Access DB storeb on windows server on lan shared folder data stored to database should be : date/time, cardID (readed card ID), cardReaderID (could be mac address of network interface), cardReaderSN (also could be the mac address of network interace), cardReaderName) Ideal candidate should have: - Proficiency in Raspberry Pi and the ability to ...

I'm in need of an IoT expert who can set up a system for me. This system should collect data like temperature, humidity, location, and images from designated IoT devices. Key Requirements: - Utilization of Temperature/Humidity, GPS, and Camera Sensors: The IoT solution should be capable of ...for viewing per client. Ideal skills for this project include experience with IoT solutions, Azure platforms, and a strong understanding of the various sensors required for the data collection. It would be a plus if you have a background in handling image data within IoT systems since the next project will be to implement computer vision on those images. Currently the hardware consists of a raspberry pi zero, GPS/GSM HAT, DHT22 sensor, camera, and a Witty module for waking up an...