Raspberry pi jobs


My recent searches
Filter by:
    Job State
    14,448 raspberry pi jobs found, pricing in USD

    I am looking for a freelancer who can help me with the configuration of a LoRa gateway and the installation of a server in my local network. LoRa Gateway: - The client is using a LoRa gateway that is not Raspberry Pi or Arduino. The specific type of gateway will be specified later. LoRa Network Range: - The desired range for the LoRa network is less than 1 km. Server Installation: - The client does not have a specific server in mind for installation. - The freelancer should have experience in suggesting and setting up a server for the LoRa gateway. - The client is open to suggestions regarding the server. Skills and Experience: - Experience in configuring and setting up LoRa gateways. - Strong knowledge of LoRa network range limitations and optimization. - Familiarity wi...

    $84 (Avg Bid)
    $84 Avg Bid
    2 bids
    Raspberry pi software 5 days left

    I'm looking for an experienced Raspberry Pi software developer to work on my project particularly the initial “out of the box” set up of the two devices with the end user inputting their SSID into the touchscreen (tkinter) connected to the Pi0’s through one of the devices starting a discoverable hot spot allowing the end user’s network credentials to be sent to the other device which will then connect to the network followed by the remaining device with the Pi establishing the primary websocket and heartbeat between the two devices. Must have all the necessary detection , fallbacks and graceful reconnects/attempts etc. while ensuring the end user does NOT have to do any coding or manual input of ports or the need to modify their routers o...

    $230 (Avg Bid)
    $230 Avg Bid
    17 bids
    Raspberry Pi project 5 days left

    Raspberry Pi Project: Data Logging and Analysis - Goal: The main goal of this project is to create a data logging and analysis system using Raspberry Pi. - Software Coding: We are seeking a skilled software developer who can handle the advanced level of complexity in coding. - Hardware Setup: The hardware setup has already been taken care of, so the focus will solely be on software development. - Ideal Skills and Experience: - Proficiency in software coding for Raspberry Pi. - Strong knowledge of data logging and analysis techniques. - Experience in developing advanced software solutions. - Familiarity with Python programming language. - Understanding of data visualization and analysis tools. - Deliverables: - A fully functional softwa...

    $172 (Avg Bid)
    $172 Avg Bid
    37 bids

    For more details see attachment.

    $202 (Avg Bid)
    $202 Avg Bid
    6 bids

    I am looking for a f...looking for a freelancer who can assist me with the software configuration for my current dispalay is split into three different mirror windows ,i just need one window for the inage attached. Desired Resolution: - The LCD screen LS060r1sx01 needs to have a resolution of 1440x2560. Operating System: - The Raspberry Pi will be running on Raspbian. Skills and Experience: - Strong knowledge and experience in software configuration for Raspberry Pi. - Familiarity with Raspbian operating system. - Previous experience working with LCD screens and HDMI to MIPI controller boards. - Attention to detail to ensure the desired resolution is achieved. Please note that I only require assistance with the software configuration, and not the hardware ...

    $39 (Avg Bid)
    $39 Avg Bid
    9 bids

    Hello, I am looking for an individual developer who has experience with Raspberry Pi project development. Essentially, I am seeking the creation of a dashboard for home automation using Raspberry Pi. Any past work related to this type of project will be given priority during the selection process. When applying, please explain your approach to achieving this task. Additionally, we would like to have a one-on-one discussion with the developer to ensure that you are the right fit for the job.

    $117 (Avg Bid)
    $117 Avg Bid
    9 bids
    Company logo 2 days left

    ...to design a logo for a brand-new enterprise. I prefer a classic and traditional style for the logo, and I have specific colors and symbols that I want included. The logo should reflect the values and objectives of our enterprise, and I look forward to working with you to create something truly special! The name of my LLC is 12 Eleven Investigations. I know that I want the same font as the Magnum, PI television series font that originally aired from 1980 to 1988 - this is a must. I don't know whether my public name should be 12 Eleven Investigations or 12-Eleven Investigations (the difference being the hyphen between "12" and "Eleven." I have included font samples in the attached document. My LLC/Private Investigation company does Criminal, Civil, Mu...

    $319 (Avg Bid)
    $319 Avg Bid
    118 bids

    I am looking for a capable software engineer to develop a graphical user interface (GUI) touchscreen for a control panel. The GUI will need to be developed for either a raspberry PI or an ESP32, depending on which platform offers the best performance and capabilities. The project will require more than 7 individual pages/screens for the GUI, so experience with graphic design and user interface development is essential. I am seeking an experienced software engineer who can deliver a finished GUI that works reliably and looks professional. If you think you can help create a custom GUI for this project, get in touch to discuss it further.

    $1527 (Avg Bid)
    $1527 Avg Bid
    38 bids

    My project needs coding on rasberry pi for a model of a robot which will moving in front of a person and will detect the object and infrom the person via voice about how far the object is and what is the obejct. It will also avoid the object which come in front of it.

    $71 (Avg Bid)
    $71 Avg Bid
    3 bids

    This project is to build a cheap system to assist athletes with pacing. I intend to use an LED strip around the track and the lights will show the athlete the pace. Like the light will run, like a wave. So it needs to be possible to adjust the speed. Let’s say the athlete needs to complete the lap in 90 seconds. So the light will go around the track (after triggered) at that speed and the athlete just needs to follow the lights.

    $99 (Avg Bid)
    $99 Avg Bid
    22 bids

    Project Description: I am looking for a skilled freelancer who can help me with coding to control an RGB LED strip. The project requires creating an interactive functionality for the LED strip, where it responds to input. Skills and Experience: - Proficiency in coding for Arduino or Raspberry Pi platforms - Experience in working with RGB LED strips - Familiarity with various input devices (e.g., sensors, switches) to trigger LED strip responses - Knowledge of programming languages such as C++ or Python - Ability to troubleshoot and debug code Hardware: - Some hardware components are already available, but additional components may need to be sourced as required.

    $94 (Avg Bid)
    $94 Avg Bid
    58 bids

    I need assistance with designing and implementing a Raspberry Pi Facial Recognition system for a lobby. The main purpose of this system is to track and monitor visitor movements, while also creating a list of individuals entering the lobby. It should be able to identify each person, and record their movements at intervals. Ideally, I would prefer that the data collected by the system is processed and stored later, rather than in real-time. To ensure security and reliable access, I would like the data collected by the system uploaded to a secure cloud database. With this system, I am hoping to create a more secure, organized, and efficient lobby experience.

    $127 (Avg Bid)
    $127 Avg Bid
    4 bids

    Help with Raspberry Pi disk image

    $369 (Avg Bid)
    $369 Avg Bid
    1 bids

    Construir una app como describe el PDF para conectar Raspberry . Importante idioma de español para poder comunicarnos

    $604 (Avg Bid)
    $604 Avg Bid
    37 bids

    I currently have a Raspberry Pi that I am running Raspbian on. The device is recognizing other devices, and I have tried the SD card that I am having issues with on another device, and it works fine. I am looking for help getting the SD card to be recognized by my Raspberry Pi. First thing I would like to do is connect a mouse to the raspberry pi. Right now it will not connect to a wired mouse either. I am running another sd card on the pi that has a specific data logging software on it. I believe it is this software that is not recognizing the usb drive. I also have reason to believe the USB Drive is the problem since that is the only thing that has been changed recently.

    $341 (Avg Bid)
    $341 Avg Bid
    28 bids

    We are looking for a Programmer/Developer experienced in streaming Raspberry Pi 4 camera to a Unity3D project in PC thru a LAN (Local Area Network)connection. The project must be tested by the developer first before project submission. Set-up: Raspberry Pi model 4B with camera Raspberry Pi NOIR connected via LAN cable to a desktop PC Requirements: 1. Unity 2021.3.8f1 project that can display a live camera stream from a Raspberry Pi 4. 2. Instruction Manual for setting up the Raspberry Pi 4 to stream the camera.

    $630 (Avg Bid)
    $630 Avg Bid
    22 bids

    Hello. I need to develop artificial intelligence or whatever is necessary for a project in which a canned satellite will be launched and needs to remotely detect water fields as it falls. I want whoever can support me to also explain step by step what is done to develop what I need and can give me some theory regarding AI, I still thought it could be done with spectrometry bu...develop artificial intelligence or whatever is necessary for a project in which a canned satellite will be launched and needs to remotely detect water fields as it falls. I want whoever can support me to also explain step by step what is done to develop what I need and can give me some theory regarding AI, I still thought it could be done with spectrometry but I need everything to be in the Rapsberry Pi. ...

    $123 (Avg Bid)
    $123 Avg Bid
    18 bids

    Configurar Raspberry para hacer correr un scripts de yolo

    $67 (Avg Bid)
    $67 Avg Bid
    11 bids

    I am looking for a freelancer who is familiar with the Modbus RTU protocol and has experience with its implementation. The project involves working with the RP2040 Raspberry Pi Pico to create a communication device. Skills and experience required: - Strong knowledge of Modbus RTU protocol - Proficiency in C/C++ programming language - Experience working with the RP2040 Raspberry Pi Pico - Familiarity with hardware and software implementations The freelancer should be able to assist with both the hardware and software aspects of the project. This includes configuring the RP2040 Raspberry Pi Pico for communication purposes and developing the necessary software to establish Modbus RTU communication. If you have the required skills and experience, pl...

    $10 (Avg Bid)
    $10 Avg Bid
    7 bids

    I am looking for a freelancer with intermediate experience in Raspberry Pi and USG-Pro-4 to help me with a project. The purpose of the project is to allow specific IPTV traffic through a firewall rule. Requirements: - Intermediate experience with Raspberry Pi and USG-Pro-4 - Knowledge of IPTV services, as I have a specific IPTV service in mind - Ability to configure and set up the firewall rule to allow the specific IPTV traffic - IPTV Service must be working for more than 3days. Somehow previous rules only work for 3days. If you have the necessary skills and experience, please reach out to discuss further details. Thank you!

    $137 (Avg Bid)
    $137 Avg Bid
    12 bids

    ...Supply (SMPS):** - Design and build a 5V 1A SMPS for low-power IoT devices. - Select appropriate components and topologies. - Ensure high efficiency and minimal ripple. - Incorporate over-voltage and over-current protection. - Optimize for compactness and energy efficiency. 2. **4-Node Relay Control:** - Develop a control circuit using microcontrollers or IoT platforms (e.g., Raspberry Pi, Arduino, ESP8266, etc.) to control four relays. - Implement remote control and monitoring capabilities via the Internet. - Ensure secure communication and data privacy. - Create a user-friendly interface for remote control. 3. **IoT Integration:** - Integrate the relay control system into our IoT application. - Enable users to remotely control and sched...

    $110 (Avg Bid)
    $110 Avg Bid
    7 bids

    Looking for a clean enticing label for our Hemp Infused Drinks. Our drinks features the following: Nano Infused Technology Delta 9 THC 100% Certified Industrial Hemp <.03% THC Product made in California The drinks will feature 6 regular flavors: Lemonade Raspberry Lemonade Orange Concord Grape Fruit Punch Lemon Iced Tea We will also offer special flavors such as: Cherry Pomegranate Kiwi Strawberry Orange/Strawberry/Banana Files need to be submitted in the following formats and must be fully customizable: AI/EPS PDF PNG/JPEG

    $30 (Avg Bid)
    26 entries

    ...model using TensorFlow Lite and YOLOV8. The project involves video-object detection, so experience in this area is of complete framework on desktop computer. The freelancer should deliver all project related files. Specific requirements for the project include: - Ability to create a model using TensorFlow Lite and YOLOV8 on a desktop Windows OS and deploy it on an RPI (Raspberry Pi) - Experience in video-object detection and understanding of custom data training - Familiarity with TensorFlow Lite and YOLOV8 and its capabilities on desktop Windows OS and RPI - Knowledge of how to optimize the model for high precision and recall - Strong problem-solving skills and ability to troubleshoot any issues that may arise during the project If you have the necessary skills and ex...

    $146 (Avg Bid)
    $146 Avg Bid
    6 bids

    ...Butter pecan Cinnamon Toast Crunch Caramel cookie crunch Turtle cheesecake Cinnamon roll FRUITY Orange Dreamsicle Strawberry cheesecake Fruity pebbles Blueberry lemon pound cake Birthday cake Mixed berry PB Pb Oreo Pb pie Reeses Snickers Butterfinger Choc Pb banana CHOCOLATE Oreo Mint Oreo Chocolate Oreo Mint chocolate chip Cookie dough TV #2 BASIC TEAS: Peach, raspberry, lemon tea Mandarin, mango, cranberry aloe Flavored teas: Jolly Sunkist Ocean water Skittles Frostie LIT TEAS POMEGRANATE LIFTOFF frostbite Starburst Watermelon blast Captain America ORANGE LIFTOFF Black panther Cool runnings Malibu crush Snozzberry Gushers Sunny Day Peach drop LEMON LIME Sour patch Cherry limeade Sharkbite Gummy bear BLACKB...

    $30 - $250
    $30 - $250
    42 bids

    I am looking for a freelancer with intermediate experience in Raspberry Pi and USG-Pro-4 to help me with a project. The purpose of the project is to allow specific IPTV traffic through a firewall rule. Requirements: - Intermediate experience with Raspberry Pi and USG-Pro-4 - Knowledge of IPTV services, as I have a specific IPTV service in mind - Ability to configure and set up the firewall rule to allow the specific IPTV traffic - IPTV Service must be working for more than 3days. Somehow previous rules only work for 3days. If you have the necessary skills and experience, please reach out to discuss further details. Thank you!

    $121 (Avg Bid)
    $121 Avg Bid
    16 bids

    I am speaking on behalf of company I am looking for a freelancer who can help me configure the DNS settings for my WordPress website, which is running on a Raspberry Pi. The ideal candidate should have experience with DNS configuration and be familiar with working on WordPress websites. DNS Provider: Cloudflare I am currently using Cloudflare as my DNS provider, and I would like the freelancer to work with this provider. Access to DNS Settings: Yes I have access to my DNS settings and I am able to make changes. The freelancer should be able to work with the settings and make the necessary changes for the configuration. Specific Requirements: Making my website run from my domain My main requirement for the DNS configuration is to ensure that my website runs smoothly fro...

    $24 (Avg Bid)
    $24 Avg Bid
    14 bids

    Project Description: fusionpbx remote SIP account setup I have fresh installed fusionpbx at my LAN. It is hosted my odroid XU4 (similar to raspberry pi) at my home network. I cannot remote register to the fusionpbx out of LAN with softphone. I want one remote account set up. I am looking for a freelancer who can help me set up a remote SIP account on my fusionpbx system. Requirements: - Existing SIP provider: Yes - Devices: Both desktop phones and mobile devices will be using this SIP account - Level of experience required: Expert Skills and Experience: - Knowledge of fusionpbx system and its configuration - Experience in setting up remote SIP accounts - Familiarity with configuring SIP providers and integrating them with fusionpbx - Basic understanding of networking a...

    $23 (Avg Bid)
    $23 Avg Bid
    6 bids

    ...IoT device. Starting within the next 2 weeks. This will be a hands-on project, involving rapid prototyping. You will be working alongside our full-time electronic engineer & and our design engineer. We are building a product in the reusable packaging/sustainability space. We have a working prototype that includes a solenoid lock, digital scale, QR scanner, LEDs, and 4G all connected to a Raspberry Pi (but looking to switch onto ESP32). This communicates with our backend and app to create an IoT ecosystem. This will need to be a commercial-ready product, so commercial experience is essential. Experience of embedded C & PCB design is also desirable. This is an in-person role due to the physical nature of the output. We have a spare desk in our office in F...

    $45 / hr (Avg Bid)
    $45 / hr Avg Bid
    26 bids

    I am looking for someone to develop a wild animal detection application using Python. Specifically, I require the application to be able to detect mammals with image recognition technology on the Windows operating system or linux on a raspberry pi. Through sophisticated algorithms integrated into our application, users should be able to identify mammals with minimal user input. It would be helpful if the application could distinguish between different types of mammals when making its determinations. Accuracy and speed are paramount for this project, and I am expecting high standard results. It must send a notification to an android app or update firebase database upon wild animal detected in a farm. it must also keep count of animal on video feed

    $243 (Avg Bid)
    $243 Avg Bid
    14 bids

    I'm looking for a freelancer to create a custom Raspberry Pi webcam score display for a sports game. The display will include real-time updates, so viewers and players can always stay on top of the scores. The goal is to create a very simple score display using cheap hardware. The only interaction is "Start new game"

    $814 (Avg Bid)
    $814 Avg Bid
    28 bids

    I am interested in product design using a microprocessor, specifically the raspberry, to create a useful and unique product. The purpose of the product is self help, meaning it should be user friendly and intuitive to use. Although I do not have a specific feature or functionality in mind yet, I have some general ideas for my product design. I believe that by using the latest microprocessor, the raspberry, a truly innovative product can be created.

    $164 (Avg Bid)
    $164 Avg Bid
    8 bids

    ...SSH connections are made from one PC to 64 Raspberry Pi units via LAN cables, 16 pillars are set up on a circle with a diameter of 3 m, and 4 to 5 cameras are installed on each pillar. (See attached image) I have existing photography software, but I would like to update some functions. ▼Existing shooting software ▼ Examples of photos taken using shooting software If you manually enter the date and name like "20230407_1_koromo_1" and press the shooting button, the date and time name will be automatically assigned and saved in each folder [Request content] ・Specifications of shooting equipment  Environment: Windows Raspberry Pi 2 + camera module 5MP (set up) x 64  USB power

    $802 (Avg Bid)
    $802 Avg Bid
    21 bids

    I am looking for a midlevel firmware developer with experience in Python programming language. The project requires working with Raspberry Pi hardware platform. Requirements: - Proficiency in Python programming language - Experience in firmware development - Intermediate level of experience in firmware development - Familiarity with Raspberry Pi hardware platform Ideal Skills and Experience: - Strong understanding of Python and experience in firmware development in RaspBerryPi - Able to understand PCB schematics and develop interfaces for microcontroller components - Proven experience with firmware involving I2C components, GPIO and sensors - Must have knowledge on REST API for IOT integration, and message brokers like MQTT - Ability to work independently an...

    $832 (Avg Bid)
    $832 Avg Bid
    63 bids

    Works September 2023 xll-addin xll-function pi-worker

    $536 (Avg Bid)
    $536 Avg Bid
    1 bids

    SAP Basis - a SAP Basis administrator knows how to make upgrades More than 8 years of experience in SAP Basis administration (ABAP and JAVA instances). UPGRADE know how to do Experience in maintaining SAP ac...how to make upgrades More than 8 years of experience in SAP Basis administration (ABAP and JAVA instances). UPGRADE know how to do Experience in maintaining SAP access and user profiles. Experience in installing Support Packages in SAP systems (ABAP and JAVA instances). UPGRADE know how to do Experience in homogeneous SAP copies (ABAP and JAVA instances). Experience in administration of SAP PI/PO systems (JAVA instances). Experience in administration and upgrades of Oracle databases. little relevant (not that important) Do support and create profiles and users, cr...

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    3 bids
    Trophy icon Logo rasberry company Ended

    I am looking for a logo to help visually represent my raspberry-related business. The logo needs to evoke a sense of trust and reliability and transmit trust within the naturally organic-grown products. I'm looking for something modern, sleek, and fun that will stand out and be memorable. Although I have some ideas that I would like to see incorporated, I'm open to creative suggestions from designers that can offer creative insight into what would work best. The logo should also radiate innovation and freshness. If you have the skills and vision necessary to create a logo that can represent my company in the best way possible and convey the desired message, please reach out. I look forward to seeing what you come up with! The business name is “GRADINA CU ZMEURĂ&rdquo...

    $19 (Avg Bid)
    205 entries

    I have 2 device + 1 Raspberry Pi 4 + 1 LCD Capacitive Touch screen resolution 960x1280, type connect FPD Link III(Chip Driver on Screen is DS90UB924-Q1) Job detail: - Design module connect Raspberry Pi 4 with LCD: Include video and touch signal - Make 1 sample

    $405 (Avg Bid)
    $405 Avg Bid
    16 bids

    I am looking for a freelancer who can help me with a project involving an ultrasonic sensor. The details of the project are as follows: Intended Use...will be used for distance measurement purposes. Desired Range of Detection: - The sensor should have a long range of detection, specifically more than 10 meters. Environment: - The sensor will be used in an indoor environment. Skills and Experience: - Experience in working with ultrasonic sensors and distance measurement is required. - Knowledge of programming languages such as Arduino or Raspberry Pi would be beneficial. - Familiarity with indoor sensor calibration and optimization would be a plus. If you have the expertise and skills required for this project, please reach out to me with your portfolio and relevant exper...

    $15 (Avg Bid)
    $15 Avg Bid
    26 bids

    I'm looking for a custom video recording system to be developed for my business. The main purpose of this system is to capture small components (less than 5cm in size) on video. I need the system's recordings to have high resolution capabilities, so video clarity is not an issue. The hardware is being developed, and has to be integrated with a Raspberry Pi 4B and I would prefer to store the recordings on a local system. The software should be capable to having a good user interface onto a small 10" touch screen and show live video on the screen. I am open to suggestions and possibilities.

    $278 (Avg Bid)
    $278 Avg Bid
    4 bids

    The Instagram automation program has web/mobile methods. I have experience with both methods, and the automated method of directly controlling the mobile device (ADB) suited me best. So far, I have automatically configured 10 Android devices, and each device is equipped with a SIM card in ...expected, the account was blocked after a certain number of login attempts. 30 accounts blocked :( A method I haven't tried yet MiFi Router (Single SIM) A method of connecting up to 5 devices by installing a single SIM card at a relatively low price 4G/5G SIM card router (Dual SIM ~ Octuple SIM) A method of dividing high-quality cellular data using a router and connecting to new devices. Raspberry Pi SIM card router (proxy server) No detailed information yet. I need your advice ...

    $66 (Avg Bid)
    $66 Avg Bid
    5 bids

    I am looking for someone to help me solve my problem. I am currently working on the following program running on a Raspberry Pi4 using gstreamer and python. - Receiving H264 encoded video from a network camera via RTSP protocol. - The resolution of the received video is 1280x720. - Decode the H264 video, convert it to RGB image, and display it on the screen. - Control the start and end of recording from the program. I am now successfully receiving video and displaying it on the screen; due to the performance of the Raspberry pi4, the achieved FPS on display is from 12 to 15. More specifically, the performance is slowing down with H264 decoding and RGB conversion. I am satisfied with this performance. The problem I am facing is that the recording file size is zero when run...

    $156 (Avg Bid)
    $156 Avg Bid
    26 bids

    A program is needed to be able to create a virtual printer that will interact with the software emulating the behavior of the printer and capturing the data sent. More explanation: A computer will have installed the drivers of the printer BIXOLON SRP-810. The computer wi...installed on COM or USB. The computer will be connected by a serial - USB cable to the ubuntu server that hosts the virtual printer. The emulator will have to interact with the print jobs that the computer send and capture the data and create an XML file with the data sent by the computer. The XML file will be placed on an specific folder. Requirements: Emulator will preferably be on ubuntu for pi orange. Emulator must comply BIXOLON SRP-810 Maximum budget 500$ if you consider your offer is beyond this please do...

    $484 (Avg Bid)
    $484 Avg Bid
    15 bids

    I'm looking for a skilled CAN Bus programmer to develop a project on a Raspberry Pi. The programming language I prefer to use is Python, and specific CAN Bus modules have already been identified for use in this project. The main purpose of the CAN Bus programming is to collect data from multiple sources and control certain devices connected to the CAN Bus network. Therefore, I need someone who is experienced in programming and managing CAN Bus systems, preferably on a Raspberry Pi project will require someone with a deep understanding of CAN Bus technology, networks, and protocols, as well as having a grasp of Linux operating systems and Python scripting. I'm anticipating the project to include the development of custom scripts and interfaces, testing...

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    20 bids

    Simply put: I'm looking to take a raspberry pi -> insert a few USB LTE Modems into the device -> {this is where you come in} and take the networking data and bond (Link Aggregate) SRT over all the connected modems.

    $433 (Avg Bid)
    $433 Avg Bid
    31 bids

    To create basic setup of the code detail of task is mention in google doc Please check and then only apply Budget Max: 1500 INR Fixed

    $15 (Avg Bid)
    $15 Avg Bid
    18 bids

    ...Communication moduls MAX485 Module RS-485 TTL Turn To RS485 4 Energy monitor Communication Module PZEM 004T 5 Energy meter DDS5188 5(32)A 20A LCD digital Power Consumption Watt meters AC220V 6 Dust sensor options GP2Y1014AU0F Compact Optical Dust Sensor 5V CJMCU-103 Dust sensor ZPH02 Dust sensor 7 Thermal Imager options MLX90640BAA Infrared camera AMG8833 8x8 Infrared camera Raspberry Pi zero WH kit Please let me know if there are any additional requirements. A telephonic conversation or zoom meeting can be done as per your convenience for detailed discussion . Looking forward to hear from you. Thank you, Shobin Peter ...

    $4329 (Avg Bid)
    $4329 Avg Bid
    27 bids

    ...uses a Rockchip RK3399 SoC. This board will use a Linux based OS and will be used for multiple deployments/applications. This board will need to be very similar to the Raspberry Pi, Rock Pi 4b, RockPro64 and have a 40 pin GPIO that has the exact same pinout as the Raspberry Pi. Board will need to have: RK3399 SoC 4GB RAM - Preferably DDR4 - and must be in dual channel config -- So 2 x 2GB SD Card - Full sized SD Card slot for the OS LAN Port - Running at 1Gbe LAN WiFi + Bluetooth - WiFi @ 2.4GHz and Bluetooth at rev 4.0 2 x USB 3.0 - for peripherals/HID 40 PIN GPIO - GPIO header with the exact same pin layout as the Raspbery Pi HDMI Port - for single display connection. USB Type C Port - This port is just to provide power to the board, no data ...

    $947 (Avg Bid)
    $947 Avg Bid
    23 bids

    I have written a bit of code to do vision, decision making but I do not know how to complete the overall structure of my program.

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    6 bids

    I am looking for a Raspberry Pi developer with experience in robotics. The specific tasks for this project include hardware integration and configuration. The client has a specific robot/project in mind and the project is of intermediate complexity. Ideal skills and experience for this job include: - Proficiency in programming and coding for Raspberry Pi - Knowledge of hardware integration and configuration - Experience in designing and building robotics components If you have a strong background in Raspberry Pi development and robotics, and are interested in working on an intermediate level project, please apply.

    $199 (Avg Bid)
    $199 Avg Bid
    16 bids

    ...expressive, and filled with personality. Each fruit character should have eyes, a mouth, and a range of playful facial expressions. Character Brief: The fruit characters should be designed as joyful and animated individuals. They will represent the variety of flavors we offer and should include the following fruits: 1. Strawberry 2. Orange 3. Banana 4. Lime 5. Blueberry 6. Grape 7. raspberry (bit pink) **Like a rainbow ** Design Elements: • Eyes: Expressive and friendly eyes that can convey different emotions. • Mouth: A welcoming and cheerful smile, capable of various expressions. • Features: Incorporate the essence of each fruit while maintaining a cohesive style. Style: We envision a colorful and whimsical style that appeals to both children ...

    $79 (Avg Bid)
    $79 Avg Bid
    80 bids

    Top raspberry pi Community Articles