Rtos microcontrollers jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,183 rtos microcontrollers jobs found, pricing in USD

    Hi, I have a project that requires knowledge in microcontrollers programming. The following is what is needed: Through a microcontroller simulator, a Master and a Slave architecture in C language. - The master should send the slave 2 bytes message via 2 different Queues. - The slave should have 2 interrupt routines to wake up and read the messaging queue: - Watchdog interrupt - 1Hz Ev...

    $175 (Avg Bid)
    $175 Avg Bid
    8 bids

    About the task: I am working on a device which will act as a mouse for people with repetitive strain injury. At the moment I am using a BNO055 sensor with a ESP32 development board to control the mouse cursor. You can find the project code here. The goal of this request is to improve the project in a couple of ways, then create the necessary CAD design files, and BOM to be able to manufacture ...

    $2026 (Avg Bid)
    $2026 Avg Bid
    12 bids
    Full Time R&D Engineer 3 days left
    VERIFIED

    1. Any graduate with a minimum of 4+ years of relevant experience 2. Preferably [login to view URL] in Electronic 3. Experience in 'Embedded Products', Microcontroller embedded hardware designing 4. Experience in handling Linux OS, RTOS(Free RTOS). 5. Experience of working with 8 bit, 16 bit & 32 bit ARM based microcontrollers 6. Should be capable of prototyping hardware & softwa...

    $934 (Avg Bid)
    $934 Avg Bid
    16 bids

    In this assignment you are required to create your own device. You are allowed to chose your own topic, however, it should meet the minimum requirements listed below. There will be points distributed for creativity, keep that in mind. Your setup should feature microcontroller to microcontroller communication. Additionally you must use at least 3 of the following systems: Matrix based input ...

    $44 (Avg Bid)
    $44 Avg Bid
    3 bids

    you are required to create your own device. You are allowed to chose your own topic, however, it should meet the minimum requirements listed below. There will be points distributed for creativity, keep that in mind. Your setup should feature microcontroller to microcontroller communication. Additionally you must use at least 3 of the following systems: Matrix based input Matrix based output Tim...

    $40 (Avg Bid)
    $40 Avg Bid
    4 bids

    Hi Adel A., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I have a digital clock project using microcontrollers. One of my friend suggested you . So ı wanted to ask you if ı share the details you will definetly know the project. is it possible to write the same project with different style?

    $15 (Avg Bid)
    $15 Avg Bid
    1 bids
    Code C++ for microcontroller 1 day left
    VERIFIED

    I have a microphone connected to a microcontroller. A microphone is used to record specific sounds. I need the code required to detect in real time a characteristic sound within the incoming frame. The result has to be the percentage of coincidence with the pattern sound. The detection must be done continuously without losing data. Is recommended to use 2 buffers: one for data acquisition and an...

    $477 (Avg Bid)
    $477 Avg Bid
    4 bids

    This document is made for ESP8266 RTOS SDK code development Requirements: a. RTOS b. SmartConfig which allows user to link hardware with wifi c. OTA: update code based on unique ID or all devices d. Watchdog to detect any exceptions/health check e. Support JSON topics f. IRremoteESP8266 g. TinyGSM (needed so that user can get sms/call when security device like Intruder/Door sensor is triggered co...

    $137 - $205
    $137 - $205
    0 bids

    We need a firmware based on RTOS to manage some peripherals attached to a STM32F407VET6. Peripherals are: -CAN (SN65HVD230DR) -LIN (MCP2003BT-E/SN) -USB (serial port emulation and FW upload) -ADC (ADS1115) -DAC (MCP4728) -I2C GPIO EXPANDER ( MCP23008) -GPIOs Main goals of the project are: Read a defined message (taken from a message list) from CAN, LIN or USB serial port Send a message over ...

    $664 (Avg Bid)
    $664 Avg Bid
    13 bids
    $24 Avg Bid
    1 bids

    Predefining: I search for an engineer that create a HID (Human Interface Devices - Computer keyboard and mouse) with a Bluetooth module. What is defined: - The board get the electricity from the USB (5 Volts) - The Computer communicate over the USB with the microcontroller - The microcontroller communicate with the Bluetooth module - The Bluetooth module get information about the keyboard and mou...

    $1282 (Avg Bid)
    $1282 Avg Bid
    14 bids

    Need for long term relation Job description: 1. Candidate should have excellent programming skills on embedded C. 2. Candidate should have experience in PCB designing and verification. 3. Candidate should have hands on experience on microcontrollers and microprocessors. 4. Candidate should have experience on communicating data from one module to another module using any standard communication prot...

    $900 (Avg Bid)
    $900 Avg Bid
    12 bids

    Hello, at the moment i am playing with sensor/s data on scv file, as i am beginner need some help. Looking for filtering /smoothing data, write back to to file, i found plotly, dash, PyQtGraph options suits my needs My task to read sensor/s, plot and filter, write back to file and play, willing to pay extra on next steps of project to add more functions. My other projets cross over with Java, C#,...

    $25 (Avg Bid)
    $25 Avg Bid
    6 bids

    Need for long term relation Job description: 1. Candidate should have excellent programming skills on embedded C. 2. Candidate should have experience in PCB designing and verification. 3. Candidate should have hands on experience on microcontrollers and microprocessors. 4. Candidate should have experience on communicating data from one module to another module using any standard communication prot...

    $878 (Avg Bid)
    $878 Avg Bid
    17 bids

    Need someone who is well versed in verilog and microcontrollers.

    $35 / hr (Avg Bid)
    $35 / hr Avg Bid
    13 bids

    Looking for a person / company who can do PCB design with Multilayer layout, schematic development with BOM, test and EMI certification. Incredible Devices is looking for a self-motivated, experienced Electronics Embedded Engineer. You will be part of the core development team involved in Prototyping and Product Development. To be successful as an Engineer, you should be a highly creative individ...

    $1506 (Avg Bid)
    $1506 Avg Bid
    30 bids

    the project is like this 2 STM32 or esp32 microcontrollers Using CAN BUS : 1-Slave: connected to motor engine -Temp Sensor-IR obstacle Sensor -speed control switch and a vibration sensor 2-Master:Connected to a Speed control switch –LCD Display-GSM Module Scenario: -if the user press the control switch the motor speed will increase. -if there is an obstacle behind the car while parking the I...

    $368 (Avg Bid)
    $368 Avg Bid
    12 bids

    Hi Narayanan Nampoothiri K., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I need help with an RTOS based [login to view URL] OS on s32k148 microcontroller. Maybe it interests you

    $97 (Avg Bid)
    $97 Avg Bid
    1 bids

    The task is to design the GUI to work with microcontrollers, simply using a couple of buttons and roll-offs without interference with the sketch. GUI is meant to simplify user interference with the device with the functionality of uploading different sketches from PC via USB. The device is collecting accelerometer data and time on the flashcard with the intervals. The GUI needs to be equipped w...

    $122 (Avg Bid)
    $122 Avg Bid
    8 bids

    We are developing smart devices for farmers such as smart ear tags (for cattle, goats, pigs etc) or smart collars. Your task will be to help us develop the network of the biometric devices for transferring GPS, Heartrate and Movement data using LoRa. The basic logic would be simply collecting sensors data using microcontrollers and transferring them to a gateway which will be 1-5 Km away (or less ...

    $604 (Avg Bid)
    $604 Avg Bid
    12 bids

    About me: I'm self-taught, with intermediate-ish knowledge of electronics and microcontroller programming. About you: You have experience working with mems IMUs and microcontrollers such as Arduino/Espressif. You have an understanding of how to manipulate the data from an IMU or gyroscope sensor to best fit the needs of a project, e.g. the appropriate BW, range, smoothing, etc. You know ho...

    $54 / hr (Avg Bid)
    $54 / hr Avg Bid
    6 bids

    We are looking for Lead Electronics Engineer based in London, UK (or commutable distance) for design and drafting of new products, and modification and improvement to existing products. Input to or assistance with firmware development is desirable but not required. Company Overview: We are an innovative company which has been designing and producing state-of-the-art smart Vehicle Access and Aut...

    $40 / hr (Avg Bid)
    $40 / hr Avg Bid
    18 bids

    Create Free rtos based system running on Zybo boardfolllowing feature: *)High priority task that is self blocking *)Scan 4 bit input port connected to press button the button should be polled at an approx 5ms interval and be stable for 20 msdebounced button acces via GPIO hardware or usal AXI gpio *)For efficency the entier port is to be treated as single input rather than individually debounc...

    $155 (Avg Bid)
    $155 Avg Bid
    2 bids

    I would like to get in touch with someone who has ALREADY have an Arduino / Esp32 /STM32 "SECS/GEN protocol stack/library", which I need to make one of these microcontrollers able to communicate with a maschine (in industrial environment) which can ONLY send/read data with SECS/GEN protocol: there`s no alternative anyone can suggest, because the machine only can understand that. I do NO...

    $227 (Avg Bid)
    $227 Avg Bid
    6 bids

    Phased project for creating firmware for an existing HMI system. No hardware design is required. 1. Identify IDE, RTOS, UI Library, and other tools 2. Create Bootloader Project 3. Create Application Project Attached document shows general development outline and award for each section. Additional technical information will be provided after NDA is executed.

    $7586 (Avg Bid)
    $7586 Avg Bid
    3 bids

    Program raspberry pi for I2C communication project with given requirements.

    $17 (Avg Bid)
    $17 Avg Bid
    5 bids

    Hi, I've the report and coding with further instruction. The freelancer needs to make the video of software simulation Video of State Machine Implantation; FPGA vs Microcontrollers in keil software ( [login to view URL]) Let me knock expert freelancer to get the job.

    $181 (Avg Bid)
    $181 Avg Bid
    3 bids

    Hi Ganeshkumar S.,Do you help with online assignment on computer system like RTOS, MIPS?

    $22 (Avg Bid)
    $22 Avg Bid
    1 bids

    Hi Narayanan N., Do you help with online assignment on computer system like RTOS, MIPS?

    $22 (Avg Bid)
    $22 Avg Bid
    1 bids

    Hi Gopinathan Subu, Do you help with online assignment on computer system like RTOS, MIPS?

    $22 (Avg Bid)
    $22 Avg Bid
    1 bids

    Hi all, I need help with firmware development for a GPS tracker prototype I'm building. It will be based on the STM32 microcontroller and will use the SIM868 as the communications module for GPS/GPRS/BLUETOOTH. Requirements: - Set up communication between STM32 and SIM868 over UART using AT commands - Sending GPS data to remote server over TCP/IP using a defined communication...

    $1861 (Avg Bid)
    $1861 Avg Bid
    28 bids

    This problem may be solved in 10 minutes, but I don't have the knowledge to solve it. I need to find a pattern in the communication between two microcontrollers that talk via serial. A device A needs to be unlocked from a device B, and for that, I believe, that it is necessary to make a data association. 90% of the communication is fixed, the difference is in 5 sets of 4 bytes, as follows th...

    $50 (Avg Bid)
    $50
    11 entries

    Hello there, We need someone with experience on designing electronic circuits. The ideal candidate needs to have experience with high power electronics and microcontrollers as our system consists of both. We'll need the theoretical part and also the design (e.g. the right values for resistors and capacitors, etc.). The circuit will be placed on a DIN rail enclosure so it would be good if we...

    $244 (Avg Bid)
    $244 Avg Bid
    31 bids

    - 10000-word eBook - Target audience: AI devs - Problem to solve: AI devs need to test their ML code for IoT devices, but have little or no experience with building and programming boards and creating quick proof of concept. - Subject: use Microchip MPLab environment in combination with MiKro Elektronik (rebranded MikroE)’s click boards to create a quick proof of concept by showcasing...

    $603 (Avg Bid)
    $603 Avg Bid
    19 bids

    Need a working source code for HTTPS server and client service running on ATSAMD51J20 series microcontroller. The HTTPS server and client source code itself must not rely on Atmel ASF or Atmel Start project. The rest of the project source, including microcontroller IO, initialization, and sockets library may be based on either barebone or Atmel ASF/Start source. The project cannot be written us...

    $579 (Avg Bid)
    $579 Avg Bid
    2 bids

    This job requires someone who has deep knowledge of the Device Tree, especially the one which is used by the Zephyr RTOS.

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    3 bids

    Candidate should be living in Noida (U.P.), Delhi as site visit is required. Incredible Devices is looking for a self-motivated, experienced Electronics Embedded Engineer. You will be part of the core development team involved in Prototyping and Product Development. 1. Candidate Must have practical knowledge of PCB Designing using either of the following software: Eagle, DipTrace, ALTIUM, or any o...

    $1196 (Avg Bid)
    $1196 Avg Bid
    11 bids

    Incredible Devices is looking for a self-motivated, experienced Electronics Embedded Engineer. You will be part of the core development team involved in Prototyping and Product Development. 1. Candidate Must have practical knowledge of PCB Designing using either of the following software: Eagle, DipTrace, ALTIUM, or any other PCB Software. 2. Testing and debugging 3. Hands on experience on Microco...

    $5156 (Avg Bid)
    $5156 Avg Bid
    2 bids

    Hello i want help on microcontrollers project, pic24

    $101 (Avg Bid)
    $101 Avg Bid
    9 bids

    Hello I have exaamm on microcontrollers imbedded systems after 2 days

    $120 (Avg Bid)
    $120 Avg Bid
    1 bids

    Standalone codes are built for an application and it works absolutely fine, Now I am looking for someone who could just port these codes into Amazon-FreeRTOS and implement multithreading for better results. ESP32 shall send the message to AWS through MQTT.

    $10 - $13
    $10 - $13
    0 bids

    need expert electrical engineer who is fully expert in all microcontrollers Long term relation.... Please don't bid indians...

    $134 (Avg Bid)
    $134 Avg Bid
    7 bids

    Looking for remote working embedded software developer part time or fulltime(Area Preference: India(Gujarat)) Min 4 to 6 years of exp. in embedded system development Excellent Programming Skills in C & C++ Board bring, device driver development, BSP & Linux Kernel programming skills Understanding of various processor and microcontroller architecture i.e. Cortex-A series, ARM series proces...

    $733 (Avg Bid)
    $733 Avg Bid
    9 bids

    Busco mejorar mi logotipo. La empresa se llama izttra y se encarga de el desarrollo de software, apps y servicios web, posiblemente en un futuro cercano también el desarrollo de paginas web. La mayor parte de nuestro trabajo es de micro controladores y micro computadoras (por eso nuestro logotipo borrador tiene un microchip). Me interesa la versión solo icono y la versión co...

    $30 (Avg Bid)
    Guaranteed
    $30
    106 entries

    I'm looking for someone with expertise in electronics, Arduino, microcontrollers, etc. To design a circular LCD/OLED (or similar) countdown display timer the same as this, but small and much much thinner - [login to view URL] The timer must only countdown days automatically, not hours, minutes or seconds, and be operated by a battery that you would get in a digital wristwatch or car key fob...

    $551 (Avg Bid)
    $551 Avg Bid
    20 bids

    This is not Android Application Development. This is low level kernel and bootloader code development and debugging on AOSP framework. Key Responsibilities Bring up Android Open Source Project (AOSP) system-level software (Bootloader, Kernel, Android Framework) on new hardware Write and maintain kernel drivers Debug Linux kernel panics and crash dumps Ensure device system performance (har...

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    23 bids

    We are looking for an Embedded Firmware Engineer skilled with ARM Cortex M4-Microcontrollers (Nordic Based microcontrollers will be added advantage ) and Esp32 Microprocessor / Digital sensors Interfacing / Serial communication protocols like i2c,SPI,i2s / Good Knowledge in Embedded C, C++and Knowledge in Threadx / FreeRtos will be added Advantage.

    $37 / hr (Avg Bid)
    $37 / hr Avg Bid
    2 bids

    One of the projects required the RTOS to handle the below requirements. • The RTOS kernel can support up to 20 tasks. • The system tick time is 10ms (i.e., SysTick is triggered every 10 ms). • The scheduling decision (i.e., deciding which task to run next) should be decoupled from the context switch (changing the stack pointers). The scheduling decision should be done in function O...

    $533 (Avg Bid)
    $533 Avg Bid
    3 bids

    One of the projects required the RTOS to handle the below requirements. • The RTOS kernel can support up to 20 tasks. • The system tick time is 10ms (i.e., SysTick is triggered every 10 ms). • The scheduling decision (i.e., deciding which task to run next) should be decoupled from the context switch (changing the stack pointers). The scheduling decision should be done in function OS...

    $594 (Avg Bid)
    $594 Avg Bid
    8 bids

    I need a software audio decoder implementation based on STM32F4 microcontroller. You need STM32F4DISCOVERY to work on a project. IAR EWARM is preferable. You can use open source projects to port it to IAR and Discovery. No need of RTOS, Ethernet, mp3, display and so on... You can also use FATFS to play files from SD, but playing music files converted to *.h (header) files also allowed. The result ...

    $2200 (Avg Bid)
    $2200 Avg Bid
    5 bids