Seals electrical mechanical revit jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,000 seals electrical mechanical revit jobs found, pricing in USD

    I'm pl...constructing a retaining wall that is 20ft wide x 6.5ft tall on back end then level out on sides from 6.5ft to ground level. The ground runs downhill from the front of the house, (shows one block 12in in the front) and at the back end is 6.5ft from top of block. The dimensions of this garage home addition are expected to be approximately 18ft x 40ft. At this point, no specific features such as electrical outlets, overhead storage, or plumbing connections are needed. I am more concerned on how the wall should be built to handle the weight and have the proper drainage! Ideal candidate should have: - Extensive experience in constructing retaining walls - Knowledge of garage home additions - Understanding of soil erosion prevention best practices - A good eye for landscap...

    $1064 (Avg Bid)
    $1064 Avg Bid
    44 bids

    We are seeking an experienced MEP engineer to review mechanical drawings, provide alterations if needed, and provide the necessary stamped drawings for a building permit in New York State (upstate NY not NYC). We are currently in the process of acquiring a building permit for an extension/addition (2070 sq ft) of our commercial daycare facility that will add 3 additional classrooms. We already have stamped structural engineering drawings completed that have been submitted to our town's building department and now need stamped MEP drawings for submission. We have drafted preliminary drawings in REVIT for the expansion's mechanical systems including plumbing, electrical, and HVAC drawings. These preliminary REVIT drawings are based on the struc...

    $2178 (Avg Bid)
    $2178 Avg Bid
    23 bids

    I'm ...can create a detailed single line electrical diagram for a commercial building. This project aims to fulfill the requirement for a building permit application. Your tasks will include: - Designing a detailed single-line electrical diagram, including all circuit elements. - Affixing an official engineering stamp to the completed diagram to signify approval. The perfect contractor for this project will: - Be versed in commercial electricity distribution and power systems. - Have experience creating detailed single line diagrams for commercial buildings. - Have access to an engineering stamp, or be a certified engineer. This is an opportunity to have a substantial impact on a commercial project's green light. Show off your detailed understanding of electri...

    $461 (Avg Bid)
    Urgent
    $461 Avg Bid
    26 bids

    I'm looking for expert assistance to create a mechanical drawing for a highly secure, automated folding main gate. Key Project Details: - Purpose: The primary purpose of the gate is to give automatic open n close. - Size: The gate will be installed at a large entrance that's more than 5 meters. - Preferred Material: Aluminum and steel. The ideal freelancer for this project should have solid experience in gate designing and profound knowledge of automation mechanics. Proficiency in using design tools and understanding of aluminum's mechanical properties is essential. Ability to work within a timeline while maintaining attention to detail will be highly favored.

    $18 (Avg Bid)
    $18 Avg Bid
    7 bids

    Hi Ahmed please build the as-builds in Revit using the point cloud. Let me know if you have any questions. This is a slab on grade project.

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    As an electrical engineering student, I need assistance with an intermediate-level assignment on power converters in power electronics with the switched capacitor circuit. The freelancer's main responsibilities will be: - Problem-Solving: Help me figure out solutions to problems presented in the assignment. - Theory Explanation: Explicate theories related to power converters to promote my understanding of the subject matter. - Design and Simulation: Assist with the design and simulation of power converters. The perfect fit for this project would be someone with a strong understanding of power electronics, specifically power converters. Previous experience in academia or tutoring would be an additional advantage as they might be more prepared to explain complex theories clearl...

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    11 bids

    I am on the lookout for an electronics and electrical engineering expert to design a 400W old type light dimmer circuit using BT136 TRIAC and DB3 diode. Key Requirements: - In depth knowledge of electronic circuit design - Must be able to use maximum SMD components - Experienced in working with the BT136 TRIAC and DB3 diode. - The final PCB dimensions should be exactly 17x33.5mm Project Specifics: - Both input and output voltage of the circuit should be 240V AC. - No specific safety requirements or certifications necessary for this project. Only apply if you are confident in your ability to meet above requirements. We aim for quality, so attention to detail is crucial.

    $79 (Avg Bid)
    $79 Avg Bid
    9 bids

    As someone competent in the realm of microprocessors, I'm currently in search of a skilled mechanical engineer whose specialty lies in working with PIC microprocessors. My primary interest centers on developing and improving their software interface. The perfect candidate for this task possesses the following credentials: - Expertise in C++ programming, to ensure effective and efficient writing for the software interface. - Proficiency in Proteus system modeling for visualizing and confirming system design. - A strong background in PIC microprocessor systems. This is the specific system I'm focusing on, so understanding its operations is fundamental. - Consequently, I require skills in Data Processing for the PIC microprocessor's software interface. This functional...

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    I'm seeking an experienced PowerPoint presentation creator to generate a compelling showcase for my electrical goods dealership. This business presentation has three core objectives: - Introducing our comprehensive products and services - Attracting potential customers - Enhancing brand awareness The PPT should include a 'Company History' section detailing our start date, major milestones we've achieved, and significant clients we've served. Alongside this, our USP, the regions we've supplied to till date, and our diverse range of services need to be depicted clearly. For the 'Products and Services' section, the focus should be on underlining the high-quality of our products, our competitive pricing strategy, and the extensive variety of ...

    $13 (Avg Bid)
    $13 Avg Bid
    15 bids

    I'm seeking a skilled drafter to create a new office floor plan from existing drawings. This primarily includes the design of walls and rooms with no requirement for furniture inclusion and advanced features such as electrical, plumbing, or ventilation systems. The floor plan is intended for construction and renovation purposes. Thus, I require a professional who can effectively illustrate the essential structural layout of the office. Essential Skills and Experience: - Proficiency in drafting software - Previous experience in architectural or construction drafting - Ability to adhere to given specifications - Timely delivery of project outputs.

    $469 (Avg Bid)
    $469 Avg Bid
    99 bids

    ...electronics and lighting/luminaires products meet the FCC, CE, and UL safety standards. We're after someone to own this function for our company's products - hopefully a long term relationship. Some standards we need to comply with include 61347-2-13, UL8750, 61558-2-16 and SELV * **Safety Requirements:** The project entails adhering to the specifications provided for the protection against electrical shocks, fire resistance, and electromagnetic compatibility. * **Ideal Candidate:** The ideal freelancer for this job will have a comprehensive understanding of industrial electronics, lighting/luminaires, and extensive experience in ensuring compliance with FCC, CE, and UL safety standards. Knowledge and experience in dealing with electronics safety regulations are...

    $40 / hr (Avg Bid)
    $40 / hr Avg Bid
    9 bids

    I need a Simulink model needs to be upgraded. The existing model contains a battery. I wanted the model to use AEFK algorithm to predict battery SOC. I expect the freelancer to add Adaptive kalman filtering technique (AEFK) to the model to estimate the Battery State-of-Health. Reference model: existing model contains a battery. I wanted the model to use AEFK algorithm to predict battery SOC. I expect the freelancer to add Adaptive kalman filtering technique (AEFK) to the model to estimate the Battery State-of-Health. Reference model: The battery model is attached below. NOTE: ONLY ELECTRICAL ENGINEERS ARE PREFERRED

    $103 (Avg Bid)
    $103 Avg Bid
    6 bids

    I am seeking an experienced electrical engineer to oversee the motor selection, wiring optimization, and minimization of electrical components for a small-capacity (1-10 kg/hr) liquid and solid food processing and dispensing machine. Your Responsibilities: - Assessing our current machine setup - Selecting suitable motors for improved efficiency - Optimizing wiring for safety and functionality - Minimizing the number of electrical components without compromising on system performance Ideal Skills: - Profound knowledge in electrical engineering - Experience in food processing equipment, particularly liquid and solid food dispensing systems - Understanding of safety standards in food processors - Efficient in troubleshooting and system optimization...

    $97 (Avg Bid)
    $97 Avg Bid
    7 bids

    1) Producing orthographic and pictorial sketches of six simple engineering objects without the aid of guiding instruments. 2) Producing orthographic and pictorial sketches of six simple engineering objects with the aid of appropriate guiding instruments. Please find attached file

    $61 (Avg Bid)
    $61 Avg Bid
    19 bids

    ...college project. The task is to design a mechanical part with specific requirements: - The designed part must be movable. This implies understanding elements such as joints, bearings, or other mechanisms involved in making a part mobile. - Prior experience in mechanical part design is desirable, especially if you've created movable parts. - Being a prototype, it's crucial to pay attention to detail, maintaining accuracy and efficiency. - The ability to communicate effectively, accept feedback, and provide multiple iterations based on modifications is a key requirement. - Extensive knowledge in Solidworks and prototype design will be advantageous, as you'll be a significant contributor in bringing my concept to life. This project is not just about mechanic...

    $14 (Avg Bid)
    $14 Avg Bid
    3 bids

    Hey! I have the Revit model. You'll have to launch it in Twinmotion or lumion, add some materials, and trees and send different views images. Need it quick in one hour.

    $48 (Avg Bid)
    $48 Avg Bid
    21 bids

    We are making a bidirectional EV charger. We need to obtain switching waves with 180° phase shifter as well as an inverted wave with same criteria. Both this wave should be obtained using Arduino.

    $27 (Avg Bid)
    $27 Avg Bid
    9 bids
    PCB Design Needed 4 days left
    VERIFIED

    I need a skilled PCB designer to create a board for production. This project requires: - Proficient understanding of Surfaces Mount Components for functionality. - Design experience with medium-sized PCBs, particularly in the range of 5x5cm to 10x10cm. - In-depth knowledge of electrical engineering principles and PCB manufacturing for production lines. Experience in mass production and compliance with quality control standards is appreciated. This project needs precision and focus to ensure the components will perform as expected. Your job will be crucial for the successful execution of the end product. Budjet 5K INR

    $84 (Avg Bid)
    $84 Avg Bid
    27 bids

    Hi Ahmed please build this project in Revit using the point cloud. It is a slab-on-grade project.

    $200 (Avg Bid)
    $200 Avg Bid
    1 bids

    I'm looking for a skilled designer to help create detailed 3D drawings for an electrical prototype. The focus should be on: - Circuit boards - Wiring - Power supply - Overall shape design The purpose of these 3D drawings is to assist with design validation and prepare for production. Ideally, freelancers bidding on this project will have experience with electrical design and drafting, with a keen eye for detail. Knowledge of prototyping and production processes would be beneficial. The 3d drawings will represent an electronic drawing board. If interested by this challenge, we will provide more information. Thank you, Chloe

    $465 (Avg Bid)
    NDA
    $465 Avg Bid
    11 bids

    I need a Simulink model needs to be upgraded. The existing model contains a battery. I wanted the model to use AEFK algorithm to predict battery SOC. I expect the freelancer to add Adaptive kalman filtering technique (AEFK) to the model to estimate the Battery State-of-Health. Reference model: existing model contains a battery. I wanted the model to use AEFK algorithm to predict battery SOC. I expect the freelancer to add Adaptive kalman filtering technique (AEFK) to the model to estimate the Battery State-of-Health. Reference model: The battery model is attached below. NOTE: ONLY ELECTRICAL ENGINEERS ARE PREFERRED

    $107 (Avg Bid)
    $107 Avg Bid
    9 bids

    I'm in need of an experienced full-stack developer to create a mechanical oral breathing trainer device. The finished product must be simplistic, yet functional, boasting two key features: • Adjustable resistance levels: To help the user gradually improve their breathing effectiveness. • Compact and portable design: Making it usable anytime, anywhere, specifically aimed for athletes and fitness enthusiasts. In addition to development, I need assistance in conducting utility and design patent checks to guarantee the design legality in the United States. A thorough understanding of patent laws and previous experience performing such checks are highly desirable for this project. This will minimize potential conflicts and ensure we can bring this valuable tool to mark...

    $434 (Avg Bid)
    $434 Avg Bid
    22 bids

    The goal of this project is to enhance the traction performance of an All-Terrain Vehicl...(ATV) All Wheel Drive electric system. * The primary objective is to improve the ATV's ability to navigate rocky terrain. * The ATV should be engineered with the capacity to carry a maximum weight of 1000 lbs while maintaining optimal traction. * This project requires deep proficiency in electric motor systems, all wheel drive mechanisms, and experience with ATVs. * A background in mechanical and electrical engineering would be beneficial. * The ideal freelancer should have a track record in improving vehicle traction, particularly for off-road vehicles and should be able to demonstrate prior work in this field. * Understanding of relevant safety standards and compliance guideli...

    $815 (Avg Bid)
    $815 Avg Bid
    17 bids

    ...focus of the project is on mechanical, interlocking parts for prototype testing. - The purpose of this project is to develop STL files that can be used to manufacture complex parts through 3D printing. - The ideal candidate will have a solid background in mechanical design, be comfortable generating part designs with explicitly given specifications. - Moreover, candidates who can also optimize the fine details of the designs, to improve their functionality and usability for testing will be highly valued. - I have exact dimensions and specifications for these parts, your expertise will majorly revolve around shaping these parts effectively for interlocking purposes. Key skills needed: Advanced proficiency in CAD for use in 3D printing, experience in Mechanical Des...

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    68 bids

    I am in need of a professional to create MEP (Mechanical, Electrical, Plumbing) drawings for a commercial space. These drawings should include detailed sections and schedules for the following: - HVAC (Heating, Ventilation, and Air Conditioning) - Electrical plans and Schedules - Plumbing plans and Schedules The interior design is done, we require the technical components Your proficiency in creating such technical drawings to meet city submission requirements will be essential for this project. Proven experience with commercial space planning and accurate, detailed schematic representation is a must.

    $1463 (Avg Bid)
    $1463 Avg Bid
    39 bids

    I'm seeking a knowledgeable and creative product designer to refine the prototype...while also keeping user experience in mind. - Material Selection: I am also looking for inputs on optimal material choices for the product. You should provide advice on what materials would improve the product's durability and performance. - Mechanical Engineering: The product's mechanics require refinement. You should have a good understanding of mechanical designs suitable for electronic products. Ideal freelancers will have a strong background in product design, especially with electronics. Experience in 3D modelling, material selection, and mechanical engineering is crucial. Your portfolio should demonstrate your product design skills and your ability to transform...

    $261 (Avg Bid)
    $261 Avg Bid
    19 bids

    I'm seeking expertise in the vast world of steel reinforced bar factories, specifically in the design and acquisition of an Electrical Arc Furnace and billets casting equipment. Your knowledge and experience in this domain will guide my journey to design an efficient factory layout and source appropriate second-hand equipment. - Factory Design: Deliver a factory plan considering the placement and arrangement of the Electrical Arc Furnace and billets casting equipment. - Equipment Sourcing: Locate suppliers for used yet reliable 7-10 tons capacity Electrical Arc Furnace and billets casting machine. - Installation: Simplify the installation process using your deep understanding of these machines. - Safety Regulations: Design should comply with local/national safe...

    $17769 (Avg Bid)
    $17769 Avg Bid
    13 bids

    I require expert technical analysis to determine the efforts in the connections of an automotive system. This involves the analysis of the stresses involved in the structural system. Ideal Skills & Experience: - Mechanical engineering - Experience in the automotive industry - Understanding of structural system analysis You would need to present detailed reports on your findings. The reports should be easy to understand and include diagrams where necessary. Prior experience in similar projects is preferred.

    $16 (Avg Bid)
    $16 Avg Bid
    7 bids

    I want a tool/software/app to automate my work tasks without my intervention. I don't know much coding, so this tool should be user friendly. My daily workday is based on using Outlook, Microsoft Edge, Excel, Signal and snipping tool. I'm an ESP Monitoring Engineer. Most of work is analyzing the performance ESP (Electrical Submersible Pumps) oil wells by viewing the trends of their running parameters (Current, Pump intake pressure, pump discharge pressure, Motor temperature, etc.) using specific surveillance websites. First, I receive an email notification that a certain ESP well has an event. This event can be a shutdown, restart, or even higher motor temperature than usual among many other notifications. Each email has a link that redirects me to a certain sur...

    $189 (Avg Bid)
    $189 Avg Bid
    19 bids

    I'm in need of an experienced handyperson who can efficiently assemble my specific model of gazebo. I've got all the necessary tools and materials, so all you need to bring is your expertise. Skills in carpentry, plumbing, and electrical work will be a great addition since they might come handy during the assembly process. Knowledge about different gazebo models is advantageous but not a necessity, as I already have a specific model in mind. Let's assemble a masterpiece together!

    $22 - $184
    Local
    $22 - $184
    0 bids

    Looking for a person who can design the Material Handling Equipment like Scissors Lifts 18 m, Floor Cranes

    $158 (Avg Bid)
    $158 Avg Bid
    29 bids

    I'm in need of a Mechanical Design Engineer who can develop a spring type cylinder design for me. The design should cater for extension and contraction movements under medium load conditions. Key specifications: - The primary function of this spring-type cylinder will be extension and contraction. It should be able to handle this efficiently while bearing medium loads. - The cylinder is to be made entirely out of steel for durability and resilience under load. - A detailed design sketch or CAD model will be required. The ideal candidate for this project would have considerable experience in mechanical engineering, specifically in designing and calculating load capacities. Mastery in using CAD tools, especially for creating designs involving metal components, is also r...

    $152 (Avg Bid)
    $152 Avg Bid
    21 bids

    For my medium-sized residential home, I need assistance with setting up Phase 3 power to support my Bitcoin mining operations. The project should include: - Designing a power distribution system. - Installing necessary electrical equipment. Ideal freelancers should have experience in: - Electrical design and installation. - Residential power systems. - Knowledge of power requirements for Bitcoin mining equipment.

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    6 bids

    ...of LED fixtures, including mechanical review, installation, thermal, electrical, and photometric evaluations. •Collaborate closely with Product Managers to define comprehensive product testing scopes, objectives, and requirements. •Assume ownership of projects, ensuring their successful and efficient completion. • Spearhead design changes and improvements to guarantee accurate and optimal product outcomes. •Maintain a comprehensive log of all open testing issues, ensuring prompt resolution. •Proactively analyze potential problems and articulate solutions in the early stages of development. This project calls for skills and experience in product engineering, process optimization, and performance enhancement. Bachelor's degree in Electri...

    $1500 - $3000
    Local
    $1500 - $3000
    0 bids

    I'm looking for a skilled logo designer who can create a vibrant logo for my electrical company. Essential elements needed are: 1) Name: Amps & Ohms Electrical 2) Needs to be instantly recognisable as an electrical company - light bulb / power volt etc 3) Logo style: Modern & Sleek Must work on both white and black backgrounds Submissions should reflect proficiency in color theory and visual composition. The selected designer would need to provide the final logo in both print and digital formats. The logo should be scalable and visually striking both in color and black and white.

    $50 (Avg Bid)
    Guaranteed
    $50
    496 entries
    IES to REVIT File Conversion 3 days left
    VERIFIED

    IES file convert to REVIT file for lighting fixtures

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    18 bids

    ...the company still exists, whether it is still in the field and why they stopped purchasing. We have prepared a dedicated link for filling in the results of the conversation. I am attaching the excel file with the records, the script of the conversation. (I translated it into Dutch on Google, it must apparently be proofread) The conversation must not be mechanical, the script is only for illustration. I have prepared several questions and answers in case it comes up in the conversation. For the purpose of the conversation, you work at Vista System Netherlands. Some of the records include several people in the same company, it is enough for us if you talk to only one of them. I am attaching several files with instructions and questions for the project

    $136 (Avg Bid)
    $136 Avg Bid
    6 bids

    I am looking for a skilled 3D artist who can create a photorealistic render of an excavator attachment. The purpose of this project is to use th...attachment to be showcased against a neutral, white background. I want the main metal body of the object to be painted yellow. but there are various parts, like the cutting surfaces to be unpainted metal. I've included a photo of the attachment so you can get a feel for what it looks like Ideal skills and experience: - Proficiency in 3D modeling software - Prior experience with rendering mechanical equipment - Attention to detail to ensure realism - Able to work with feedback and adjustments - Solid understanding of lighting, shading, and texturing Please provide examples of your previous work, preferably with similar project...

    $81 (Avg Bid)
    $81 Avg Bid
    61 bids

    ...modular UPS (Uninterruptible Power Supply) design. The project entails designing a complete modular UPS system with a 20kW bidirectional peak shaving-off power conversion system. Attached power specification and detailed job description below. Project Specifications: Power Capacity: 20kW Operation: Bidirectional Peak Shaving Conversion System: Modular UPS Deliverables: Schematics: Detailed electrical schematics showcasing the design of the UPS system. This should include: Power circuitry Control logic Safety mechanisms Input and output interfaces Bill of Materials (BOM): A comprehensive list of all components required for the UPS system. This should include: Part numbers Descriptions Quantities Suppliers Board Files: Design files for the UPS system's printed circuit bo...

    $1304 (Avg Bid)
    $1304 Avg Bid
    6 bids

    I'm looking for a professional with broad experience in AutoCAD 2D drafting and Excel data entry. AutoCAD Drafting: - You will be working on mechanical design projects. - Your primary role will be to convert manual drafts into 2D AutoCAD drafts. - Meticulous attention to detail in replicating these designs in AutoCAD is crucial. Excel Data Entry: - Additionally, your role will also include meticulous data entry tasks in Excel. IDEAL SKILLS AND EXPERIENCE: - Proficient in AutoCAD 2D drafting with an emphasis on mechanical design. - Experienced in data entry in Excel. - Attention to detail is a must. - Experience in mechanical engineering design will be a plus. I look forward to working with someone who can meet these requirements and help me take my project...

    $246 (Avg Bid)
    $246 Avg Bid
    98 bids

    We at Carelabs, a UAE-based electrical consumer service provider, are seeking an accomplished technical content writer to generate concise, engaging content on the topic “arc flash study and analysis”. Key Responsibilities: - Understand and effectively communicate basic concepts and definitions related to arc flash study and analysis. - Highlight the benefits and importance of arc flash studies within the electrical industry. - Clearly outline and detail safety precautions and guidelines related to arc flash incidents. Ideal Skill Set: - Proficient in technical writing with a focus on electrical safety - Capable of conveying complex information to a targeted audience - mainly electrical engineers and safety professionals. - Proven ability to writ...

    $264 (Avg Bid)
    $264 Avg Bid
    28 bids

    The final Package will contain a 2D Drawing set of the shipping container along with a 3D model. Also, the source file of the 3D model in Revit 2021 will be provided.

    $140 (Avg Bid)
    $140 Avg Bid
    1 bids

    ...can design modern projects, both facades and interior design. •Know how to use Revit very well, to make 3D models and very detailed floor plans. •A person who knows how to render in Enscape and is willing to learn a more advanced rendering engine in the future. What will you do in this job? Every week you will be assigned a new project, first you must make the furnished floor plans rendered in Enscape. Then you are going to work on the facades and interiors, the design and the renders and finally you are going to work on an animation of the project that covers the interior and exterior. You can do the entire design part and the renders in Sketchup. When the project is approved you need to make the models in Revit and then the entire set of floor plans. We are a...

    $456 (Avg Bid)
    $456 Avg Bid
    64 bids

    I need an Australian expert to draw up a Single Line Diagram (SLD) for a 24-volt system. The SLD is required for comp...for a 24-volt system. The SLD is required for compliance documentation and needs to be highly detailed. (We will have continuous projects upcoming) Key Requirements: - Incorporation of detailed circuitry - Inclusion of component specifications - Provision of safety measures The SLD should adhere strictly to the National Electrical Code (NEC) and the Occupational Safety and Health Administration (OSHA) regulations. Ideal Skills: - Excellent knowledge of electrical diagrams - Familiarity with NEC and OSHA regulations - Attention to detail for circuitry and component specifications Your prior experience in creating SLDs for compliance purposes will be a ...

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    15 bids

    I am seeking an experienced electrician to diagnose and rectify frequent tripping issues with two of my household's AFCI circuit breakers. This project requires: - Significant experience in residential electrical systems - Deep understanding of AFCI circuit breaker design and functionality - Capability to diagnose and amend underlying issues causing frequent tripping Although the problem might be straightforward for an expert, complete resolution is crucial, ensuring this inconvenience does not recur. Your expertise and professional attention to detail are essential for this task. Only looking for freelancers located in the Boston, Massachusetts, USA area.

    $511 (Avg Bid)
    $511 Avg Bid
    20 bids

    I am in need of a professional drafter who can create a mechanical drawing of a commercial kitchen canopy, to be utilized for permit application purposes. Key Project Components: - The design must incorporate an electric oven as the primary appliance. - Canopy has been already installed - The Surveyor requires the mechanical drawings for the canopy - We were not aware of the need for the mechanical drawings being needed for the surveyor satisfaction. Ideal Candidate Attributes: - Extensive experience in kitchen layout designs, particularly in the commercial realm. - Proficient in creating mechanical drawings that are ready for submission to local permit authorities. - Solid knowledge of commercial kitchen safety standards and requirements. - Strong familiari...

    $264 (Avg Bid)
    $264 Avg Bid
    42 bids

    I am seeking an experienced technician to upgrade my conveyor system's functionality. The project has twofold goals: 1) Fix/replace the faulty VFD that controls the conveyor belt (Capacitor has popped) 2) Integrate a VFD that controls a motor that drives the attached guillotine mounted on top of the conveyor belt. Job Tasks: - Sw...VFD that controls the conveyor belt (Capacitor has popped) 2) Integrate a VFD that controls a motor that drives the attached guillotine mounted on top of the conveyor belt. Job Tasks: - Swap out a faulty capacitor on the existing Schneider VFD. - Integrate a VAC 220 VFD to the switchboard, to drive a 1/2HP 3 ɸ motor for the guillotine module. - Hands-on experience with VFDs. - Expertise in electrical capacitor replacement. -Expertise with industri...

    $296 (Avg Bid)
    $296 Avg Bid
    15 bids

    I am seeking an experienced draftsman to help me design the opening in a cinderblock wall. The drawings submitted must meet the requirements of Anne Arundel County, MD for permit approval. Features to include in your design: - Construction Details. - Dimensions and Measurements. - Material Specificat...The successful applicant will need to submit a detailed project proposal that includes past work experience. This project demands familiarity with Anne Arundel County's permit approval processes and requirements. The outcome of this project is to obtain the necessary permit for wall modification. Consideration will be given to freelancers with a solid background in building and construction, mechanical engineering or related field. I look forward to collaborating most efficientl...

    $500 (Avg Bid)
    Featured
    $500 Avg Bid
    25 bids

    We are seeking an experienced developer to configure data exchange between a Jetson Nano and another device via the CAN bus, utilizing the RS485 CAN HAT. Documentation and examples for the RS485 CAN HAT for the Jetson Nano are available here: Project Requirements: Data packets to be transmitted are split into fram...packet from the CAN bus. Verify the correctness of the checksum. If the checksum is correct, send a response to the CAN bus indicating "all is clear:crc", where crc is the control signature. The response packet must also be split into frames accordingly. Consider the necessity of data buffering due to the very short interval between packets. Skills Required: Embedded Systems C/C++ Programming Electrical Engineering Linux

    $509 (Avg Bid)
    $509 Avg Bid
    21 bids