Usb audio playback schematic jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    13,164 usb audio playback schematic jobs found, pricing in USD

    Looking for someone that can create a schematic drawing for a custom interpreter console with the following inputs and outputs. Left Side (Interpreter 1 Connection): TRRS Audio Jack (In - Mic, Out - Headphones) Volume Adjuster Right Side (Interpreter 2 Connection): TRRS Audio Jack (In - Mic, Out - Headphones) Volume Adjustment (Headphones) Top: 4

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    5 bids

    I would like a PCB board(s) design so that I can complete this project. I have made an 8x8x8 LED RGB cube, I have a schematic which I have attached and was created using Eagle, however I am not fussed if you need to use a different program as long as I can send the files off to print the PCB. I will tell you this was not my plan and I got this idea

    $247 (Avg Bid)
    $247 Avg Bid
    19 bids

    I need a Revit and Cad designer that can work project to project basis for me. I need them to already understand Comm...Kitchen and equipment, and also current state standards in terms of MEP and Hygiene requirements. Please make sure you understand how to take a project from Concept, to Schematic, to Design Development MEP and Tender Documentation.

    $887 (Avg Bid)
    $887 Avg Bid
    39 bids

    i have a schematic and some of the components values are missing. (a few capacitors, coils, and resistors) i need someone who is familiar with Silicon Labs si4463 transceiver module. thank you.

    $77 (Avg Bid)
    $77 Avg Bid
    10 bids

    The requirements are as follows: 1. Introduce the evolvement and...development trend of the 3D projector, and recommend some good 3D projectors on today's market, including the JMGO N7L ([login to view URL]) which supports 3D content playback. 2. 1,000 - 1,200 words. 3. 3-5 Pictures. 4. Be original and express your opinion. NO Plagiarism!

    $25 (Avg Bid)
    $25
    4 entries

    ...not stable, waveform is like noise) Your work, if you accept it, will consist in finding the cause of the problem, and proposing a solution to fix it. (i will provide the schematic of the circuit) additionaly, i want to add a mod to the circuit : ->i want to have a feedback message in the serial monitor, to be sure that the frequency that i have uploaded

    $59 (Avg Bid)
    $59 Avg Bid
    9 bids

    Hello, i have tinkerboard computer running xubuntu 18.04 tls. i use rdesktop to access my win10 virtual machine on server in local network. i want to connect smartcard and usb device to xubuntu and want to use it in my win10 vm. thats your tasks! i will create milestone, but i will only pay if work is finished! thanks.

    $174 (Avg Bid)
    $174 Avg Bid
    6 bids

    i want to hire experienced person of circuit designing and in embedded system contact me for more information chate

    $375 (Avg Bid)
    $375 Avg Bid
    28 bids

    ...old keyboard that was once sold in the us via monoprice and went out of production years ago. I love this keyboard for various reasons, Black cherry mx switches, usb passthrough, modular usb cable, but mainly because as far as i can tell it is the only keyboard in the world which is TKL and has macros (the roccat ryos pro tkl also does but they arent

    $118 (Avg Bid)
    $118 Avg Bid
    5 bids

    ...Total audio does not exceed 2.5 hours. Basically, what you hear you have to write in english. Sample transcript will be provided. Optional You will obviously require a PC and some audio software VLC (to play the file) that can slow down audio playback to about 55-60% of original speed to keep up. I use OGG audio codec so 1.5 hours of audio consumes

    $25 (Avg Bid)
    $25 Avg Bid
    8 bids

    We are looking for PCB and Schematic Diagram Designers adept at using Altium Designer. State in your proposal the complexity of the PCB designs that you have worked on, the applications that you have designed schematics for, as well as your hands-on experience in practising DFM / DFA. Begin your proposal with the words "Substrate" or " Track". You will

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    16 bids

    Hi girmax, I noticed your profile and would like to offer you my project. We can discuss any deta...your profile and would like to offer you my project. We can discuss any details over chat. 2 thinks. 1- Can I control my nvr by keyboard. Especially for playback 2- What is the fastest playback config for 128ch NVR with 8 x 8TB hdd. its too slow now.

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    1 bids

    Please see attached file to this project!

    $298 (Avg Bid)
    $298 Avg Bid
    20 bids

    Take an existing PDF schematic, and create a cleaned version in OrCAD Capture with a correct BOM.

    $142 (Avg Bid)
    $142 Avg Bid
    21 bids

    The schematic and PCB design of a DC/DC converter, preferably a SEPIC, that converts the variable voltage of the CIGS solar panel (335….360W and voltage at Pmpp 56.8 …. 60V) to 4 outputs of 42V 2A (constant current), which are used to charge e-bike batteries of 36V nom. Available power must be shared between the 4 outputs. Solar panel: [login to view URL]

    $834 (Avg Bid)
    $834 Avg Bid
    22 bids

    We need a line illustration created for this USB drive to show people how the usb opens. We would also like an arrow added showing how the tab with the chip flips up to open.

    $90 (Avg Bid)
    $90 Avg Bid
    33 bids

    We are building application where we need to connect to hardware with serial port and perform hardware control with node js code. If you have very very good knowledge about node and node serial port then only reply with project. You will be working with remotely with team and hardware with team viewer so you can see how it works. When you apply for this project don't forget to mention &...

    $444 (Avg Bid)
    $444 Avg Bid
    12 bids

    Hellow, I need to design a schematic for a small project. Only some small questions , need it done in some hours. for questions ask me, but only if you have time directly

    $30 (Avg Bid)
    $30 Avg Bid
    3 bids

    HI , I am looking for designing a electronic system which be used to identify the trolle...trolley back on the line . I am looking for a wired solution , wireless solution is not suitable for my use case . The developer has to develop the schematic and the code . The deliverables are 1. schematic 2. gerber 3. source code 4. 2 working samples.

    $497 (Avg Bid)
    $497 Avg Bid
    15 bids

    Please Sign Up or Login to see details.

    Featured Sealed Top Contest

    Hi, I have a schematic designed in LTSpice that I would like created on a PCB. This isn't a very complicated circuit and would hope that it could fit on a board about 5cm x 5cm or 5cm x 7cm. The outcome of the project is the files I would need to provide someone to produce the PCB. Thanks.

    $29 (Avg Bid)
    $29 Avg Bid
    11 bids

    hi I would like similar or same software that usb kyloggers use where I could load on to my own blank usb devices

    $68 (Avg Bid)
    $68 Avg Bid
    4 bids

    Industrial Digital temperature controller In this project I need schematic of digital temperature controller using microcontroller, I also need HEX file, C program file and electronics components details of this project. More project description as below… Control action=ON-OFF/PID Input details: 1 temperature sensor RTD (PT-100) [range -99 to 850]/

    $263 (Avg Bid)
    $263 Avg Bid
    9 bids

    Hello, I have the pictured boards and want the wiring setup and code to make the button to activate a horn when pressed

    $92 (Avg Bid)
    $92 Avg Bid
    9 bids

    Hey, I have few schematic files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. We can discuss more on chat. Its a PICO EVB Board.

    $80 (Avg Bid)
    $80 Avg Bid
    1 bids

    Hey, I have few schematic files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. We can discuss more on chat. Its a PICOEVB Board.

    $80 (Avg Bid)
    $80 Avg Bid
    1 bids

    Hi Indir O., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I have few schematic files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. We can discuss more on chat.

    $80 (Avg Bid)
    $80 Avg Bid
    1 bids

    ...instructions. Also you will not implement jr and slt. All other R-type instructions (including sltu) in the MIPS Green Sheet will be implemented. Hint: Start with drawing schematic on paper for each module. Do not hesitate to write 32 lines of logic expressions for each bit of one or two 32-bit numbers whenever required. You have to simulate all instructions

    $27 (Avg Bid)
    $27 Avg Bid
    2 bids

    I need to buy a NILM (non-intrusive load monitoring) base...need to buy a NILM (non-intrusive load monitoring) based Energy Monitor CAD model, circuit simulation. It should include: AutoCAD model of the hardware design. A circuit schematic, preferably simulation ready file. All the other relevant files through the finishing of the project. Thank you.

    $73 (Avg Bid)
    $73 Avg Bid
    4 bids

    Design an Industrial RS-485 and another RS-232 Surge Protector, from schematic to Gerber files, including Zeners diode, EMI and EMC filters, fuse and any other element important for the best.

    $64 (Avg Bid)
    $64 Avg Bid
    7 bids

    Hello, we are looking for an experienced QT and Android developer to develop a small library to communicate with a USB HID device without requiring a rooted phone. The library should be accessible via QT/C++ and provide functions like: - open - listDevices - write (blocking and nonblocking) - read (blocking and nonblocking) - close We require the library

    $228 (Avg Bid)
    $228 Avg Bid
    8 bids

    We are looking for PCB and Schematic Diagram Designers adept at using Altium Designer. State in your proposal the complexity of the PCB designs that you have worked on, the applications that you have designed schematics for, as well as your hands-on experience in practising DFM / DFA. Begin your proposal with the words "Substrate" or " Track". You will

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    19 bids

    I'm looking to build a single page in which I will be able to upload MusicXml files and render them as playable music sheets similar to [login to view URL] or Flat.io. T...have functionalities similar to the video posted. Core features: 1. Mixer Adjust Volume/Mute/Solo different voices or instruments 2. Play/Pause 3. Export to PDF 4. Adjust playback speed

    $535 (Avg Bid)
    $535 Avg Bid
    12 bids

    Looking for someone to do schematic, bom file and design pcb with 3g/4g , Bluetooth, wifi, wireless charging

    $755 (Avg Bid)
    $755 Avg Bid
    34 bids

    Hi, Need make PCB for instrument, total have 3 board, all schematic made by hand need to make lay out for PCB Gerber file then PCB. The Design is base on PIC MCU, interested person contact me urgently. Thanks and regards SMM

    $232 (Avg Bid)
    $232 Avg Bid
    43 bids

    ...The device should have provision for “calibrating” using the mobile app. This procedure will allow users to easily configure a delay for each speaker to ensure synchronous playback. 2. A mobile app that will run on the mobile device and will allow users to connect/disconnect the Bluetooth speakers to the hardware device. GUI design will simple and

    $194 (Avg Bid)
    $194 Avg Bid
    6 bids

    ...instructions. Also you will not implement jr and slt. All other R-type instructions (including sltu) in the MIPS Green Sheet will be implemented. Hint: Start with drawing schematic on paper for each module. Do not hesitate to write 32 lines of logic expressions for each bit of one or two 32-bit numbers whenever required. You have to simulate all instructions

    $28 (Avg Bid)
    $28 Avg Bid
    5 bids

    We need from our 4 models schematic graphics for our website, example attached.

    $111 (Avg Bid)
    $111 Avg Bid
    28 bids

    Need someone to create a piping schematic using AutoCAD. I have a floor layout showing equipment with pipes and pipe sizes.

    $99 (Avg Bid)
    $99 Avg Bid
    67 bids

    ...and it has both a wireless connection and several USB dongles for 4g connection. I would like to proxy via this machine using the IP and then connect to internet via 4g. It has to be anonymous (should not be detected as proxy), reliable and easy to use (i.e. I can proxy into it using ip:port1 for usb dongle 1, ip:port2 for dongle 2 etc.). I want to

    $729 (Avg Bid)
    $729 Avg Bid
    5 bids

    ...and it has both a wireless connection and several USB dongles for 4g connection. I would like to proxy via this machine using the IP and then connect to internet via 4g. It has to be anonymous (should not be detected as proxy), reliable and easy to use (i.e. I can proxy into it using ip:port1 for usb dongle 1, ip:port2 for dongle 2 etc.). I want to

    $549 (Avg Bid)
    $549 Avg Bid
    7 bids

    I need some one with experience in pcb design for a wifi project. I will need schematic , gerber files ready for manufacturing , BOM of materials.

    $185 (Avg Bid)
    $185 Avg Bid
    34 bids

    I have a urgent need to replace a PIC18F252 with PIC18F14K50 in a project. Following are the tasks i am looking. Schematics Layout as per schematic provided (Change PIC with newer PIC + add programming header + power header)

    $28 (Avg Bid)
    $28 Avg Bid
    20 bids

    ...live Push-To-Talk recording other users cannot use the Push-To-Talk button. - Fast delivery; using low-bandwidth live Push-To-Talk recordings / communication. - Speaker & Playback; sender and receiver must have as look-and-feel and usability the following options; 1) All send (live) recordings must be stored (as history) in an instant messaging form

    $547 (Avg Bid)
    $547 Avg Bid
    17 bids

    ...live Push-To-Talk recording other users cannot use the Push-To-Talk button. - Fast delivery; using low-bandwidth live Push-To-Talk recordings / communication. - Speaker & Playback; sender and receiver must have as look-and-feel and usability the following options; 1) All send (live) recordings must be stored (as history) in an instant messaging form

    $1207 (Avg Bid)
    $1207 Avg Bid
    23 bids

    We require an experienced Electronics Engineer to review a voltage divider and opamp buffer interface to a data acquisition unit. This also includes a simple voltage boost inverter. Happy to just discuss the circuit design on [Removed by Freelancer.com Admin - See Section 13 of Terms and Conditions]. Sample attached.

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    26 bids

    I would like to play different video (urls) when detect cloud image targets.

    $386 (Avg Bid)
    $386 Avg Bid
    16 bids

    ...Support 3. Live Video Support (Live Icon) 4. DVR Rewind Support 5. Logo Placement on top of video support (from html element) 6. Playlist if video is offline (recorded contents playback from API) 7. Whitelabeling and making it our player with no traces of videojs in code. 8. Google Analytics Integration 9. Poster is stream is offline 10. Autoplay 11. Preloading

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    10 bids

    ...Pitch and Tempo, Lyrics view while track playback, Share, Rate, Chat with Admin and Users, Favorites, Recently Played Tracks, Audio Recording with selected track, Video Recording With selected track, Download and Share recorded videos on social media, Save recorded files to phone memory, Mic effects, Audio Equalizers, Invite, Share App, Rate App, in-App

    $215 (Avg Bid)
    $215 Avg Bid
    3 bids