Yacht equipment drawings autocad jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    18,160 yacht equipment drawings autocad jobs found, pricing in USD
    Autocad drawing preparation 6 days left
    VERIFIED

    ...800sq.m. site. The revit models need to be extracted into dwg and edited to make autocad drawings for an authority approval submission. I will provide a manual for the layer names, object types, drawing elements etc. and other instructions on how to prepare the drawings. 6 plans, 2 sections and one elevation have to be extracted from Revit and prepared

    $93 (Avg Bid)
    $93 Avg Bid
    28 bids

    Design and Provide fabrication drawings and parts list of snack and soda vending machines

    $172 (Avg Bid)
    $172 Avg Bid
    16 bids

    ...degree of slope: South tilts in 18 degrees, North 15 degrees, West 16 degrees and East 24 degrees (these are approximate angles - true angles are to be taken from the autocad drawings. I am hoping you are able to take a section through the building as indicated and a second section through a lower portion of the roof assembly to determine if the angle

    $39 (Avg Bid)
    $39 Avg Bid
    5 bids
    Civil Engineering Drawings 6 days left
    VERIFIED

    I need the following Civil Engineering drawings: (1) Notice of Intent ( NOI) to TCEQ required. (2) Location and detail of all storm water pipe (3) Hydraulic Drainage Study; (4) Retention Pond Design for Storm Water; (5) Plat with utility and drainage easements identified; (6) Details of drainage inlets; (7) Domestic water needs ( size of line), as well

    $169 (Avg Bid)
    $169 Avg Bid
    18 bids

    I have two visio files that we were told were drawings but they look like images instead. I need the images to be replicated in autocad as an actual drawing. Timeline is pretty short only a few days

    $332 (Avg Bid)
    $332 Avg Bid
    64 bids

    ...here [login to view URL] I am finding it difficult to source quality SVG line drawings to draw with my plotter, so Part 1 of the project is to help me with this. I need a reliable process to turn images into SVG line drawings that can be drawn on my plotter, either using existing software solutions or a custom piece of software

    $95 (Avg Bid)
    $95 Avg Bid
    4 bids

    ...Protection Design and Consulting company with over 20 years trade experience. We are looking for a certified engineer in Ontario, Canada, to review and stamp fire protection drawings and backflow prevention submittals. We are not looking to “purchase” a stamp. We operate with integrity and professionalism. The right candidate will be familiar with NFPA

    $256 (Avg Bid)
    $256 Avg Bid
    2 bids

    I have [login to view URL] sketch drawing i want to design this autocad 2D drawing & 3D revit drawing

    $42 (Avg Bid)
    $42 Avg Bid
    57 bids

    I have a list of architectural project sheets in a complete drawing set and a list of specification section from the project manual. The sheet names, date, spec sections and description, etc need to get populated into the word form. The entries in the form are just examples, and should be deleted, so the form is filled with only the sheets and specs from the pdfs. Drawing sheets should be listed ...

    $23 (Avg Bid)
    $23 Avg Bid
    19 bids
    Trophy icon Sun First Equipment Finance LOGO 11 hours left

    Need a company logo for this company. Main symbol should be the "Sun". Select font that is professional, business oriented. Avoid cartoon or casual look and feel. attached sun is a look that we like.

    $50 (Avg Bid)
    Guaranteed
    $50
    176 entries

    Will need to be stamped and approved for permitting in county of San Bernardino California, will be RV storage for a 45foot RV, with an attached 800sqft living quarters. I prefer contemporary/industrial designs, so I've attached some of the looks I like, this home will be built in a high desert so I would like it to fit in geographically.

    $333 (Avg Bid)
    $333 Avg Bid
    7 bids

    Need someone experienced to work with the project. I want someone who can work with 2D Vectors on Android app and with 3D on web. That is 2D drawings which will be made in android studio related to floor plans and later on exported and displayed only on the web in 3D. For More Information contact.

    $397 (Avg Bid)
    $397 Avg Bid
    9 bids

    This is not rendering gig!!! We manufacture and supp...review the architectural plans, measure from elevations and match our company's products based on the shop drawings we provided. This is a part-time to full time job. We will be paying per set of drawings. AutoCad and architectural drawings navigational knowledge with 3 years experience must.

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    36 bids

    ...freelancer who would be in a position to prepare hand made (not computer made) 18 drawings (illustrations) for a book on personal finanse management aimed at males/females age 18-25. Each illustration should match each chapter title (there are 18 chapters hence 18 drawings are needed). We need files in ai, tiff or eps file format. Each illustration in

    $633 (Avg Bid)
    $633 Avg Bid
    92 bids

    Make 3 floorplans for porch (birdview, front and sideview) and the same drawings in autocad You must look at the attached file to read the project. Notice that the measurements are not finalized and you will need to change some of the measurements later. I will pay you USD 40.

    $96 (Avg Bid)
    $96 Avg Bid
    26 bids

    I have a website that sells disability equipment to Australians. Our target customers are people with a disability and receive funding from the National Disability Insurance Scheme. Customers can use the money from their scheme to purchase products from us. There is no out of pocket fees for them. Our website: [login to view URL] Based on the results

    $272 (Avg Bid)
    $272 Avg Bid
    31 bids

    I need two drawings "cleaned up" with an eraser tool and something added to one of the drawings. $10 fixed price.

    $12 (Avg Bid)
    $12 Avg Bid
    35 bids

    Would you be interested in creating shop drawings for us? This time we would need roof shop drawings for an SBS system. We have the DWG files and we just need to adjust them to our standards. Please let me know if you are interested. Then I'll send you the documents.

    $138 (Avg Bid)
    $138 Avg Bid
    73 bids

    Using my high pressure karcher (using water) I need my patio/courtyard weeded and cleaned. Approx 50sqm

    $32 (Avg Bid)
    Local
    $32 Avg Bid
    1 bids

    A client has selected some bespoke furniture which we need 1 plan (from above) and elevation (front and side) for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can re-scale them our end once the dims

    $156 (Avg Bid)
    $156 Avg Bid
    18 bids
    autocad drawing 3 days left

    2d Plan, working drawing, joinery, saintry and electrical drawing

    $18 (Avg Bid)
    $18 Avg Bid
    36 bids

    A client has selected some bespoke furniture which we need plans and elevations for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can rescale them our end once the dims have been confirmed. The proportions

    $164 (Avg Bid)
    $164 Avg Bid
    19 bids

    Delivering revit files from supplied AutoCAD files

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    78 bids

    Would you be able to start drafting up some elevations of the outside front and rear elevations for me based on the photos.

    $23 (Avg Bid)
    $23 Avg Bid
    43 bids

    ...engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets for commercial

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    39 bids

    ...or 3 and 4 and it is used to undo or tighten the lid. -PLEASE READ THIS DESCRIPTION CAREFULLY- I have already had a friend draw up the designs in auto cad i just want the drawings adjusted slightly, but i also need the tee piece drawn up on auto cad, and then all 4 disks and the tee piece 3d modeled so they can be printed out on 3d printer.(total of

    $35 (Avg Bid)
    $35 Avg Bid
    13 bids
    patent drawings 2 days left
    VERIFIED

    I have 2D vector CAD drawings that need to be cleaned up and prepared for patent drawings. approximately 10 drawings plus 1 drawing made from a photo. only people with prior design patent drawings or design patent illustration knowledge.

    $140 (Avg Bid)
    $140 Avg Bid
    15 bids
    AutoCad drawings 2 days left

    I am studying the 3 main Pyramids of Giza and hope to write a book about them. I firstly want 2D AutoCAD drawings that highlight key dimensions. I have these for the Khufu (Cheops) Pyramid on a XL Spreadsheet. I want to highlight the inherent geometrical patterns by using different colored lines but this involves a large area outside the structure also

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    62 bids

    I retail sofas. I need clients to easily see what a chairs looks like, two seater, three seater etc. Line drawing, birds eye view. Rough hand drawn sketch provided.

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    24 bids

    ...engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets for commercial

    $319 (Avg Bid)
    $319 Avg Bid
    55 bids
    CAD drawings 2 days left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $111 (Avg Bid)
    $111 Avg Bid
    11 bids
    Trophy icon CAD drawings 2 days left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $64 (Avg Bid)
    $64
    13 entries

    I need 10 line drawings done.. just need to outlines main lines.. line thickness 0.50mm then positioned inside a 34mm diameter circle MESSAGE ME TO START NOW

    $31 (Avg Bid)
    $31 Avg Bid
    28 bids

    We need several drawings done for an office furniture line. We currently have some done so the new ones will need to match. There are 4 colors and many configurations. We need a freelancer that has a fast turn around time and is very proficient in furniture renders. Attached are some that are already created. I will create a milestone for a freelancer

    $145 (Avg Bid)
    $145 Avg Bid
    62 bids
    Autocad blue print 2 days left
    VERIFIED

    I need someone to help me draw blue prints for a factory

    $131 (Avg Bid)
    $131 Avg Bid
    43 bids

    We are a Electrical Control Panel Manufacturer in Noida. We design, manufacture and commission ACDB, PLC panels. We have been in business since 2014. We are a professionally managed company with highly technical background. We takeup challanging projects and execute them to client's satisfaction. This is an ongoing work and we need a person who can be associated with us for next few years....

    $20 (Avg Bid)
    Local
    $20 Avg Bid
    3 bids
    Autocad plans for home 2 days left
    VERIFIED

    I am putting together an idea for a dream home. I have some ideas sketched up and would like to have them put into a DWG file so I can add and change them as I please. Just a 2d model.

    $26 (Avg Bid)
    $26 Avg Bid
    77 bids

    Would like a machine drawn up so we can then get all componentry laser cut. We will supply all sizes that we would like drawn and all hardware included.

    $275 (Avg Bid)
    $275 Avg Bid
    108 bids

    I am looking for an Expert/Experienced Auto-CAD Designer to help sketch my concept, design and showcase a 3D version of the product as well as suggest the best textile options. I am looking for someone who can create this concept and be able to meet the desired details based on the functionality of the product. I have uploaded pictures to give an idea of what this product would be doing. You wil...

    $208 (Avg Bid)
    NDA
    $208 Avg Bid
    19 bids

    I am putting together an idea for a dream home. I have some ideas sketched up and would like to have them put into a DWG file so I can add and change them as I please. Just a 2d model.

    $39 (Avg Bid)
    $39 Avg Bid
    21 bids

    I need line drawings done outlines main lines ..14 total and 10 line drawings edited to make line thickness 0.50mm all drawings need to be 0.50mm in line thickness and put inside a 34mm diameter circle.. PLEASE MESSAGE ME TO START NOW need done today and tomorrow more designs every week..

    $39 (Avg Bid)
    $39 Avg Bid
    37 bids

    We need the design by a structural engineer, using AutoCAD, of a retaining wall using geocells, geogrids and geotextile, based on a topographic survey, taking into account all vectors, topography of the field, seismic risks, etc. Width of 50 meters and high of about 15 meters. 8 Drawing profile sections to be delivered with all volume of material required

    $374 (Avg Bid)
    $374 Avg Bid
    27 bids

    To create a vector illustration (.eps), created in a Whimsical style. (Images st...Whimsical style. (Images style supplied in attachments) 2 x Characters to be included a (Man / woman) embracing. Also to be featured: Buildings from a New York skyline. A yacht sailing A map of Lithuania. Allow for 3 x revisions. Examples of previous work required!

    $160 (Avg Bid)
    $160 Avg Bid
    57 bids

    [login to view URL] suchlike php msql and payment system + admin panel

    $26 (Avg Bid)
    $26 Avg Bid
    3 bids
    CJD Equipment [Qld] 12 hours left

    Please provide high resolution artwork in vector , pdf and jpg files Dimensions : 64mm x 40mm

    $14 (Avg Bid)
    $14 Avg Bid
    5 bids

    I need basic drawings that will get me by for permitting and pricing for a new campground in Walsenburg Colorado. City water runs through the site on the east side. see sketch from survey, blank survey and topographical map. On the sketch the likely location of the water line is the red line on the east side of the property (right side of image) it's

    $5312 (Avg Bid)
    $5312 Avg Bid
    33 bids

    Modify 2-D AutoCAD files to reflect as built changes for elevations and plan view. Drawings are for residential kitchen, bar and media room. PDF of changes needed is attached. DWG files are available in AutoCAD 2016 and 2018 versions.

    $348 (Avg Bid)
    $348 Avg Bid
    26 bids

    Need 8-10 still image drawings if cartoonised characters. The drawing needs to be done in adobe illustrator and file provided in .svg format. Similar to this in the video attached. [login to view URL]

    $139 (Avg Bid)
    $139 Avg Bid
    22 bids

    I have ongoing work related to our previous project 'Design a Website for a US Yacht Club'

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids