Yazaki connector cad jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    43,134 yazaki connector cad jobs found, pricing in USD

    Note: I will ONLY work with an architect familiar with United States building conventions. I want to convert the Rec Room in my California home into a "Junior Additional Dwelling Unit" (Jr ADU). I need an architect to create the blueprints and elevations for the renovation. Source Material + Incomplete ArchiCAD model (that I drew) + House blueprints (pdf) + Rec Room addition blueprin...

    $399 (Avg Bid)
    $399 Avg Bid
    7 bids

    Similar to photos but not the exact same due to design patens Need solidworks

    $2398 (Avg Bid)
    $2398 Avg Bid
    45 bids

    I am in the first steps of Milling some Sprint Car steering arms and need some help with the drawings

    $106 (Avg Bid)
    $106 Avg Bid
    25 bids
    Mendix & MySQL 6 days left

    I need help from a Mendix expert to finish developing a Mendix application that connects to MySQL through the Databade Connector. It is a simple application but that I need to finish. The application consists of reading, updating and saving invoices in a MySQL database.

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    1 bids

    Design and fabricate an object for maximum load bearing capacity per unit mass (i.e. maximum specific strength) and maximum energy absorption. The object should fit in a cubical volume of 5x5x5cm3. The 3D printed object will be tested in compression mode and the maximum load to failure divided by object weight will be used as a success criterion. need done: 1. CAD model (deadline on 23 ) 2. Projec...

    $199 (Avg Bid)
    $199 Avg Bid
    10 bids
    Trophy icon Compressed Air cylinders 6 days left

    I'm currently working on a project to understand if 'transportable compressed air cylinders' is possible. Majority of existing compressed air cylinders are attached to a compressor making the compressed air relatively difficult to take with you to a desired location. I'd like to decouple the compressed air cylinder from the compressor to make the compressed air cylinder eas...

    $63 (Avg Bid)
    Guaranteed
    $63
    1 entries

    Hi Inderjit S., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I have a dozen photo-realistic renderings to be made of out fire door products in customer settings (industry, healthcare, musea, etc.). Since our products are CAD designed, delivering product files to you won't be a problem. The modeling also involves creating life-like surro...

    $293 (Avg Bid)
    $293 Avg Bid
    1 bids

    We need a professional expert to complete some corporate deal. We are targeting some brand to include in our portfolio. B2B expert from NA (Canada, USA & Mexico) has to make some corporate deal on behalf of our company. The professionals should have some relevant experience, corporate contact and familiar with relevant job nature. Corporate dealing skills is very much required. Required educat...

    $200 (Avg Bid)
    $200 Avg Bid
    15 bids

    All i have is drawings I've made and want them turned into reality for a personal project for myself and 2 friends. I do not have any techpacks or CAD drawings- just the attached images. This does NOT require 50 pcs but only 3 samples. About the product: 1. It is a tactical vest. I imagine it to be mostly made of netting, leather seams, leather yellow pocket on front 2. I will source fabrics ...

    $264 (Avg Bid)
    $264 Avg Bid
    2 bids

    The floor plan drawing must be made in Auto-cad program and For 3D modeling used Sketch Up Pro program. Time( 72 hours).

    $55 (Avg Bid)
    $55 Avg Bid
    37 bids

    Dear Freelancers, I want to be make 3d Art Model of Jems design as per attached images, I am looking for guy who can build this models in 3D model and make 5 Axis programming in Mastercam and give us. If you have experiance of making 3D cad Cam then only you can bid this project. I have attached Images and need 10 no 3D models from them and to be design with 5 axis programming in mastercam. Pl...

    $8 - $20
    Sealed
    $8 - $20
    4 bids

    Dear Freelancers, I want to be make 3d Art Model of Jems design as per attached images, I am looking for guy who can build this models in 3D model and make 5 Axis programming in Mastercam and give us. If you have experiance of making 3D cad Cam then only you can bid this project. I have attached Images and need 10 no 3D models from them and to be design with 5 axis programming in mastercam. Pl...

    $2 - $8 / hr
    Sealed
    $2 - $8 / hr
    4 bids

    Dear Freelancers, I want to be make 3d Art Model of Jems design as per attached images, I am looking for guy who can build this models in 3D model and make 5 Axis programming in Mastercam and give us. If you have experiance of making 3D cad Cam then only you can bid this project. I have attached Images and need 10 no 3D models from them and to be design with 5 axis programming in mastercam. Pl...

    $8 - $20
    Sealed
    $8 - $20
    2 bids

    Good morning, I kindly ask for the creation of an automatic procedure for AutoCAD LT 2021 capable of listing the objects present on a warehouse CAD layout. Objects are Groups of lines, extended using Series. The goal is to have the list of all the generated objects (see file), named with an ID Counter (i.e. Bin01, Bin02, ... the order is not importan) with the parameter present in the attached fi...

    $163 (Avg Bid)
    $163 Avg Bid
    9 bids

    Budget is AUD 50 (all included). I have some questions which need to be answered. Message me for more details.

    $40 (Avg Bid)
    $40 Avg Bid
    6 bids

    Allow us to introduce ourselves. You could say we have been around the block. Founded in 1963 by the LEGO group, Modulex has been in the signage and branding implementation business for 57 years. We know a thing or two about the business and are exceptional at what we do. Our multi-national group with 5 factories globally and presence in over 300 cities across 45 countries, gives us infinite reac...

    $32 / hr (Avg Bid)
    $32 / hr Avg Bid
    10 bids

    The project consists in the production of the 2D design for the shop fit-out on the basis of CAD files to be provided. The client is planning to carry out a light strip-out of the shop together with some structural alterations while ‘adding their stamp’ to the shop. The feeling is for a luxury cashmere company where the store will have some clean lines and lighting. The value of the pr...

    $1886 (Avg Bid)
    $1886 Avg Bid
    17 bids

    Elevations of a building drawn on a PDF to be converted to a CAD drawing and finish with a .dwg file for future use

    $128 (Avg Bid)
    $128 Avg Bid
    42 bids

    Budget is AUD 50 (all included). I have some questions which need to be answered. Message me for more details.

    $36 (Avg Bid)
    $36 Avg Bid
    3 bids

    Need to make CAD from a drawing.

    $28 (Avg Bid)
    $28 Avg Bid
    27 bids

    I have a small lighting product, and need a realistic render. Please check attached cad model file and similar render I need. I need color scheme same as example. Thanks

    $92 (Avg Bid)
    Urgent
    $92 Avg Bid
    15 bids

    I have small lighting product, need a realistic render. please check attached cad model file and similar render I need. color must be same. Thanks

    $72 (Avg Bid)
    $72 Avg Bid
    12 bids

    I need a 3D animation of how our unique face mask works ?? CAD of measurements for prototype to be made Demonstration to show investors... moving up and down and how to unfold .. thanks.

    $184 (Avg Bid)
    $184 Avg Bid
    52 bids

    have 3d made without sheetmetal considerations, need to split the whole part as per manufacturing feasibility and sheetmetal guidelines. someone from India preferable.

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    15 bids

    Experience with Multi Axis/Anthropomorphic Motion/Compound Motion/6 Degrees of Freedom Robotic applications. A high geometric mathematical ability is needed. The project is to write the Control Software for a Patented Robotic technology consisting of two multi axis arms with harmonic drives. The actual prototype is in the process of manufacture and assemble build. Control electronics have been sel...

    $2650 (Avg Bid)
    $2650 Avg Bid
    13 bids

    Looking for an experienced industrial designer for a to design a powersports dealership in CAD. The powersports dealership will be for Polaris Off Road vehicles: [login to view URL] Wanting an economical design with a low cost to build. Total building size 30,000 - 50,000 sqft. Ideally 12,000 sqft in showroom, with parts, service, and office space. Front Area Showroom Ideas: [login to view UR...

    $384 (Avg Bid)
    $384 Avg Bid
    25 bids

    I have a client that needs a freelancer to provide a Design of a CUSTOM 2 Bedroom w/ 2-1/2 Bath residence with covered rear open lanai and 30' long a 8' wide lap pool and a covered front entry with all natural wood posts everywhere . and an excercise room that opens up to the rear lanai. bEDROOMS ON OPPOSITE SIDES WITH LIVING AREA BETWEEN 2200-2400 s/f oVERALL building dimensions 60�...

    $194 (Avg Bid)
    $194 Avg Bid
    24 bids

    I need 3 outfits to show for my next collection, it’s a new brand so I need to see some reaction first from potential buyers. The 3 outfit will be complete and showcasing 2 FW and 1SS, I will provide drawing and pictures as example

    $143 (Avg Bid)
    $143 Avg Bid
    26 bids

    We have a small building project that requires updating in the drawings and also adding information onto the drawings from engineering plans. Some of it will be 'marked up/', but some will require interpretation between 2 sets of drawings, so a freelancer with experience in this sort of work is important. Final output will be DWG and PDF and the job is very urgent - ideally 2 to 3 days ...

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    47 bids

    Auto cad, making cross section, and survey . And making Estimate

    $11 (Avg Bid)
    $11 Avg Bid
    2 bids

    Looking for 3D jewelry designer inter To convert 2d drawings/images to 3D printable CAD formats.

    $158 (Avg Bid)
    $158 Avg Bid
    37 bids

    Please read the proposal, the vehicle/chassis is ALREADY DESIGNED. see the links below. I need help getting the shell of the design done. For Legal FREELANCER Reference. ** I OWN THIS VEHICLE.** I OWN EVERYTHING LISTED HERE! ** AS YOU CAN SEE BY THE PICTURES PROVIDED. I OWN ALL PROPERTY LISTED BELOW. (freelancer has issues deciphering the difference so I need to note this) Need the outside sh...

    $132 (Avg Bid)
    $132 Avg Bid
    35 bids

    My Steven, I need project high end indoor basketball court with balcony around the court, basement employees area(bathroom), custom with showers, fitness room, massage room, classrooms with two offices and owners office(bathroom). Urban Cafe with coffee station fruit juice station one 6 burner stove one flat metal stove, small deep fryer, baker oven, meat oven. Cutting tables and sitting table. S...

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    1 bids

    We are in the process of building a camping trailer. Blueprint are paper based. We would like some help to digitize them + find center of gravity

    $120 (Avg Bid)
    $120 Avg Bid
    21 bids

    I Know the Pay is very little due to some reasons but i would increase the pay on further projects. a lot more Jobs to come in future. Please check this link for Sample before you bid [login to view URL] Please only Bid if you can meet my Deadline for just 10 CAD

    $10 (Avg Bid)
    $10 Avg Bid
    25 bids
    3D art Model of jems 5 days left
    VERIFIED

    Dear Freelancers, I want to be make 3d Art Model of Jems design as per attached images, I am looking for guy who can build this models in 3D model and make 5 Axis programming in Mastercam and give us. If you have experiance of making 3D cad Cam then only you can bid this project. I have attached Images and need 10 no 3D models from them and to be design with 5 axis programming in mastercam. P...

    $97 (Avg Bid)
    $97 Avg Bid
    6 bids

    THIS PROJECT IS 40% COMPLETED ALREADY. PLEASE DO NOT LIE AND APPLY FOR THIS PROJECT WHEN YOU ARE NOT QUALIFY TO HAND THIS PROJECT. Looking for a full stack web developer that is specialize in Laravel, Php, Html5 and Bootstrap. The freelancer must have rich experience in converting WordPress site into Laravel website. both frontend and backend development, server management, optimized database d...

    $246 (Avg Bid)
    $246 Avg Bid
    20 bids

    i want to design my home layout and 3D elevation. An expert in auto cad and 3D max only allow to bir.

    $99 (Avg Bid)
    $99 Avg Bid
    8 bids

    As Tittel shows I want someone who can work accordingly to weekly and monthly. Payment will get weekly or monthly.

    $20 (Avg Bid)
    $20 Avg Bid
    79 bids

    We are a furniture manufacturing company and we urgently need someone with similiar prior experience in making working drawings for furniture pieces in AutoCAD and 3d. Proficiency in the software and understanding of furniture is a must.

    $76 (Avg Bid)
    $76 Avg Bid
    37 bids
    Build me a website 5 days left
    VERIFIED

    I need a website which allows users to create an account, upload CAD designs (.stl, .iges, .igs, .ipt) and pdf files and request quote to manufacture their CAD file

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    6 bids
    3dcad render pumps 5 days left
    VERIFIED

    I have shared the reference image for the final products of the 7 individual pumps. I will upload the files for your quick reference. I really like the look, feel colors, and the layout of the CAD Centrifugal Pump example. That example is what I am looking for with the illustrations of the other 7 pumps. I am excited to work with you and really like your portfolio. You are welcome to ask any quest...

    $43 (Avg Bid)
    $43 Avg Bid
    8 bids
    CAD designer 5 days left

    I m decorating a laundromat, I need someone who can design my shop. My budget is limited, Thank you,

    $260 (Avg Bid)
    $260 Avg Bid
    41 bids

    Move the light point in the auto-cad floor plan where the diagram says (middle of the dining table) - and put a dining table with specific measurements in the same AutoCAD floorplan

    $22 (Avg Bid)
    $22 Avg Bid
    7 bids

    drawing house in CAD and providing relevant files also siting house on given lot

    $21 (Avg Bid)
    $21 Avg Bid
    1 bids

    Hi Khushbu B., as discussed please post 200 posts for $50 CAD

    $37 (Avg Bid)
    $37 Avg Bid
    1 bids

    Job Brief: We are looking for a strong mobile app developer who welcomes both software development and maintenance tasks. The primary focus of this application will be to provide an efficient online platform to connect the customer with the service provider based on the location and preferences. Similar applications are Uber/Eats, Turo and Airbnb. This application needs to be developed in Android...

    $3307 (Avg Bid)
    $3307 Avg Bid
    67 bids

    Hi CAD BeStudio ®, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    1 bids
    Data Entry Clerk -- 2 4 days left
    VERIFIED

    Seeking a data entry clerk. You will be finding information on the Internet and entering it in our database. The position pays CAD$2.00 per hour, and you will work 40 hours per week for CAD$80 per week. I am not looking for a company. I am looking for an individual.

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    128 bids

    3d CAD and renders of toy gun as discussed

    $60 (Avg Bid)
    $60 Avg Bid
    3 bids