Zigbee 802 jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    807 zigbee 802 jobs found, pricing in USD

    please give me a text message on (213) 802-9789 country:- USA

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    We need a ZigBee developer to write firmware for CC2530 (E18-MS1PA1-PCB) based on ZStack 3.0. Device: ZigBee-thermostat for the Z2M project. Firmware functionality: the device accepts UART commands and transmits them to the ZigBee network. We will provide the communications protocol.

    $500 (Avg Bid)
    $500 Avg Bid
    3 bids

    Looking for a ZigBee developer to write firmware for CC2530 (E18-MS1PA1-PCB) based on Z Stack 3.0. Device: ZigBee-thermostat for the Z2M project. Firmware functionality: the device accepts UART commands and transmits them to the ZigBee network. We will provide the communications protocol.

    $153 (Avg Bid)
    $153 Avg Bid
    3 bids

    Project detail - HW platform : TI CC1352P - SW platform : TI ZStack - Goal TI Zstack is zigbee 3.0 stack develop by TI It is support the 2.4Ghz frequency. My target frequency is sub 1giga(473 ~ 540) So I need some modification the Zstack. Source control - Using the Git on by my source server. I will give the ID/PW for developer. - Must git push every 3 days. HW support ...

    $1105 (Avg Bid)
    $1105 Avg Bid
    2 bids

    Need to design a smart switch board with capacitive touch, arduino and for communication it has to use zigbee protocol. If you are interested we can get on a call and discuss more technical details. Thank you

    $124 (Avg Bid)
    $124 Avg Bid
    12 bids

    mobile app building for home automation. We need app very similar to "TTLock" or "USmart Go". Please download app check and understand thoroughly. app should be capable of integrating with Bluetooth, WiFi, Tuya, Zigbee and Z-Wave. then send your proposal to st@abez.in. Bangalore based offers are preferred.

    $422 (Avg Bid)
    $422 Avg Bid
    17 bids

    I am a competent C programmer working on a project using ESP32, Zigbee, XBee3 & Sonoff for the first time and need help from someone very familiar with Zigbee and the Home Automation Profile to help me resolve a couple of issues I have. 2 hours max I suggest.

    $23 - $47 / hr
    $23 - $47 / hr
    0 bids

    Introduction: Adapt Ideations is a technology company focussed on building the future of IoT. We are a team of IIT-B & HBS alumni working on the vision of bringing intelligence to assets using IoT and Blockchain. We have built scalable IoT products that are being used worldwide. Join us on building the next IoT platform. Check out our website [login to view URL] for more information. Qualit...

    $3124 (Avg Bid)
    $3124 Avg Bid
    12 bids

    I want two xbee s2c module to communicate with each other wirelessly. The trasmitter xbee should be connected to arduino uno and power source. The reciever xbee should be connected to arduino uno , power source and a micro sd module to retain different RSSI values for different distances between the two modules. I had all components. I need help in writing codes , xbee configuration, and connec...

    $165 (Avg Bid)
    $165 Avg Bid
    2 bids

    We are part of a worldwide network providing drug testing services. We have a presence in multiple countries. Our client wants us to conduct drug testings in Japan, specifically in 2-5-8, Kumamoto, Kokurakita, Kitakyushu Fukuoka, Kitakyushu, Fukuoka, 802-0044, Japan We will train you on how to do it and provide necessary supplies and tools. You will have to either go to the client place to c...

    $30 - $40
    Local
    $30 - $40
    0 bids

    We are part of a worldwide network providing drug testing services. We have a presence in multiple countries. Our client wants us to conduct drug testings in Japan, specifically in 2-5-8, Kumamoto, Kokurakita, Kitakyushu Fukuoka, Kitakyushu, Fukuoka, 802-0044, Japan. We are open to discuss and reimburse your travel fees. We will train you on how to do it and provide necessary supplies and t...

    $70 - $80
    Local
    $70 - $80
    0 bids

    The module is indented to be used as hotel room automation main [login to view URL] bellow features are necessary: 220INPUT 30A OUTPUT TO FEED THE MAIN POWER OF ROOM 2 EXTRA RELAY OUTPUTS TO BE USED TO CONTROL LIGHTS OR AC POWER RS485 PORT FOR CONNECTION OF SLAVE DEVICES SUCH AS SWITCH PANELS,ACCESS READERS ETC. 12V OUTPUT TO FEED MODBUS SLAVE PANELS 3 DIGITAL INPUTS FOR CONECTION OF MAGNETIC CONT...

    $1502 (Avg Bid)
    $1502 Avg Bid
    16 bids

    The plan is to build a custom STM32H7 Microcontroller for machine learning use cases. It will have ARM Cortex M7 (STM32H753IIT6) 7 Segement Display ESP-WROOM-32 ESP32 Wifi and Bluetooth CC2520 Zigbee USB C Interface for power and programming Coin cell breakout Arduino Headers RGB LED for power RGB LED for Wifi and Bluetooth RGB LED for zigbee DS-9960 Gesture sensor BH1790GLC Heart rate sensor M...

    $410 (Avg Bid)
    $410 Avg Bid
    18 bids

    We are part of a worldwide network providing drug testing services. We have a presence in multiple countries. Our client wants us to conduct drug testings in Japan, specifically in 2-5-8, Kumamoto, Kokurakita, Kitakyushu Fukuoka, Kitakyushu, Fukuoka, 802-0044, Japan We will train you on how to do it and provide necessary supplies and tools. You will have to either go to the client place to c...

    $30 (Avg Bid)
    Local
    $30 Avg Bid
    1 bids

    from the farm to table food need to be monitored (temperature/humidity/door/Geo Location) using sensors. we should collect the data using different networks such as LoRa, Sigfox, NBIoT, Zigbee. need to create reports, real time alarms should be sent using email, sms, push notifications . I have attached interface of software now I am using.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    12 bids

    Need someone to help us make the code for an sensor on z stack 1.2.2a urgent devloper needed

    $111 (Avg Bid)
    $111 Avg Bid
    1 bids

    We are working on application which will use external sensors , we need someone to do the design and explanation which hardware we should use and why. Case : 10+ sensors , data need to be sent/received from/to/sensors , Ideally on ZigBee solution but any other solution I can consider - is all about the cost of the hardware - must be as low as possible like CC2530 for ZigBee. All sensors need to be...

    $461 (Avg Bid)
    $461 Avg Bid
    14 bids

    Hi I need someone who has a development experience with Android application development and cheap WiFi communication modules like ESP8266 . We are trying to build a prototype of one project for school and just need someone who can answer some questions about communications of those modules with Android and give us advice if we should use ESP8266 / zigbee or low energy bluetooth. Project is to re...

    $38 (Avg Bid)
    $38 Avg Bid
    3 bids

    We are a fast-paced company seeking candidates who have experience working with Xbee/Zigbee protocol skills and bonus points for working in a Linux environment. Additional bonus points for the Digi 868/915MHz devices especially. Check the attached file for more insights in to the project. Thanks

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    8 bids

    "Development Description Bluetooth Embedded full Stack Developers for Bluetooth Embedded Devices Development Period 3 x team members required, so if you have a team of 3 then we are interested 2 x years full time positions International Company Based In New Zealand Hardware Firmware Development Experience Nordic IC (Chipset) BLE 5.0 and 5.1 BLE Mesh Network Ver 5.1 PCB Design Firmware Short...

    $37 / hr (Avg Bid)
    $37 / hr Avg Bid
    13 bids

    Development Description Bluetooth Embedded full Stack Developers for Bluetooth Embedded Devices Development Period 3 x team members required, so if you have a team of 3 then we are interested 2 x years full time positions International Company Based In New Zealand Hardware Firmware Development Experience Nordic IC (Chipset...

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    18 bids

    I need zigbee 1 GATEWAY and multi sub device programming. Gateway will include Ethernet, Wi-Fi. System will work MQTT. Developer will coordinate for IC selection.

    $285 (Avg Bid)
    $285 Avg Bid
    7 bids

    Hi, personally passionate for technology started in these months the path of the automation of my house (Zigbee + WiFi + ZWave + Shelly + Homey controller). A lot of work to do... :-) Need help to realize the software to drive 4 PWM FAN (Noctua NF-A12x25 PWM) + sensor reading temperature (DS18B20). Need that the system read the temperature constantly and send it to an MQTT broker (hosted on an Hom...

    $173 (Avg Bid)
    $173 Avg Bid
    10 bids

    We are looking for IoT gateway by which we can data continuously and it send that data to the cloud using MQTT Sending data to the gateway can be in from LoRa ,ZIGBEE,BLE and nRF24L01. Data received by gateway will send data to the cloud using MQTT. MQTT must be generic code so that we can use MQTT broker.

    $160 (Avg Bid)
    $160 Avg Bid
    8 bids

    Hello) We are building 5 one bedroom flats for renting in Kyiv. Have decided to do smart lightening and air conditioning on Zigbee protocol. I need an advice on appliance to be selected and how it will be connected. Please find attached schema of electricity

    $140 (Avg Bid)
    $140 Avg Bid
    1 bids

    Looking for help in some algorithm design and modification for the PoC in place. Need experienced engg in localisation and Tracking projects. someone familiar to UWB, Bluetooth, Zigbee, GPS. With expirience in High Power Motor control (12V/24V)

    $528 (Avg Bid)
    $528 Avg Bid
    7 bids

    Extract reading from Landis + Gyr E650s4x electricity meter. [login to view URL] It can be through the Zigbee protocol or by RF. Programmer is required to have completed a project of this type previously because I have no more information. I only have the equipment to test.

    $540 (Avg Bid)
    $540 Avg Bid
    9 bids

    Conduct tinyos simulation to performance study in terms of network lifetime and packet reception rate (PRR) in the 802.15.4 radio of a multihop (all nodes hopping their packets through intermediate nodes en-route to the sink) networks by using nodes simulation on TinyOS. TinyOS is an event-driven operating system built specifically to operate hardware specific zigbee devices (called motes; an exam...

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    Hi Laszlo B., I noticed your profile and would like to offer you my project. We can discuss details over chat. I need the following things to be done: a) Install & train on the latest version of Home-assistant on a RPi and then install the same on another linux board ( beaglebone). b) Train on different integrations available on home assistant like KNX , Dynalite , modbus , volumio , alexa ,...

    $8 (Avg Bid)
    NDA
    $8 Avg Bid
    1 bids

    We have created a grow light for indoor farming. The product uses Zigbee communication through an FTDI chip (FT232). We have proven the functionality of the grow light and the communication while using a basic FTDI terminal Android app. We want to create a custom app for users to operate the product. We need an app created for both iOS and Android that will allow users to change the light settin...

    $584 (Avg Bid)
    $584 Avg Bid
    7 bids

    This project is still available as of 8 June 2020... You must live in The Western Balkans, Eastern Europe, The Russian Federation, or Egypt. Also, before you begin this project you must have an ESP32 development board with 4 MB of pSRAM (such as an ESP32-WROVER), and a temperature sensor (such as a DS18B20), and a 1 or 2 or 4 or 8 or 16 channel relay module. You will be unable to complete this pr...

    $189 (Avg Bid)
    $189 Avg Bid
    12 bids

    You must live in The Western Balkans, Eastern Europe, The Russian Federation, or Egypt. Also, before you begin this project you must have an ESP32 development board with 4 MB of pSRAM (such as an ESP32-WROVER), and a temperature sensor (such as a DS18B20), and a 1 or 2 or 4 or 8 or 16 channel relay module. You will be unable to complete this project using an emulator. *** OVERVIEW *** Eventuall...

    $200 (Avg Bid)
    $200 Avg Bid
    1 bids

    Radije radim s nekim ko živi na zapadnom Balkanu. Before you begin this project you must possess an ESP32 development board with 4 MB of pSRAM (such as an ESP32-WROVER), and a temperature sensor (such as a DS18B20), and a 1 or 2 or 4 or 8 or 16 channel relay module. Eventually the Household Appliance Controller version 1.0 (HAC 1.0) will be sold as a consumer electronic product for more than 50...

    $30 - $250
    $30 - $250
    0 bids

    You must live in The Western Balkans, Eastern Europe, The Russian Federation, or Egypt. You must possess an ESP32 development board with 4 MB of pSRAM (such as an ESP32-WROVER), a temperature sensor (such as a DS18B20), and a 1 or 2 or 4 or 8 or 16 channel relay module. Eventually the Household Appliance Controller version 1.0 (HAC 1.0) will be sold as a consumer electronic product for more than...

    $100 (Avg Bid)
    $100 Avg Bid
    4 bids

    You must live in The Western Balkans, Eastern Europe, The Russian Federation, or Egypt. You must possess an ESP32 development board with 4 MB of pSRAM (such as an ESP32-WROVER), a temperature sensor (such as a DS18B20), and a 2 or 4 or 8 or 16 channel relay module. Eventually the Household Appliance Controller version 1.0 (HAC 1.0) will be sold as a consumer electronic product for more than 50 U...

    $182 (Avg Bid)
    $182 Avg Bid
    4 bids

    We are looking for Hotel Lock Software Requirements as below; 1) Basic Offline hotel software package 2) Online Wireless-Gateway for connection between door lock and Icloud Database using ZigBee Technology or BLE technology 3) Mobile App for Connection between door lock & Icloud server database using BLE 4.0 Technology BLE Function for mobile phone application Bluetooth Low Energy(BLE) 4) Soft...

    $10018 (Avg Bid)
    $10018 Avg Bid
    28 bids

    Silicon Labs and Arrow Electronics, in collaboration with Amazon Web Services (AWS) and TE Connectivity (TE), are launching a contest to spark technology innovation to inspire the next best smart home idea. Smart home technology transforms our lives, infusing a new level of convenience, control, security and efficiency in our daily routines. This proliferation of smart home devices into everyday ...

    $3000 (Avg Bid)
    Featured Guaranteed Sealed Top Contest
    $3000
    388 entries

    Design Custom IO Board for Compute Module 3+ providing connectivity over the following wireless protocols: 1. WiFi 2. BLE 3. Z-Wave 4. Wireless M-Bus 5. ZigBee Information on the preferable components will be shared after the agrrement

    $240 (Avg Bid)
    $240 Avg Bid
    10 bids

    I am looking to build a Proof of Concept using IoT devices to be used in homes and care homes for older people. I will need at least two devices connected (one motion sensor and another heat detector). the telemetry information will be send to the cloud application (AWS or GCP). The application will then send mobile notification on a small app. For POC the app can either be IOS or Android, the dev...

    $329 (Avg Bid)
    $329 Avg Bid
    9 bids

    We are a hatmakers from Munich Germany , we need our logo designed for website social media use. Logo: man with hat drawing In uploaded files With lettering FATZKE , man is standing on the letters COLOURS: black , gold , Pantone pms 802 , Pantone rhodamine red 2x

    $68 (Avg Bid)
    $68 Avg Bid
    42 bids

    We have an existing app that reports Zigbee sensor data. The sensors connect to our database via a Dusun Zigbee gateway hub. We need to simplify and automate the process of connecting the hub to the user's home internet. We want the user to download the app (Google Play Store and Apple App Store) on their phone and connect to the hub's SSID. The process then needs to display availabl...

    $513 (Avg Bid)
    $513 Avg Bid
    14 bids

    Hi Saim, I am using a Dusun Zigbee gateway to read Zigbee sensor data to report the activity level of seniors in their homes. I need a way to simplify connecting the gateway to the user's home internet using the app we have built. Is this something you can do?

    $250 - $250
    $250 - $250
    0 bids

    I would like work on embedded systems field i am interested in that [login to view URL] new for freelance also.i have more than 1 year of experience in Embedded systems field.i have knowledge in ZigBee,lora, Arduino IDE ,Arduino Uno, Arduino mega Arduino nano,ARM stm32, proteus,keil software,GSM,gps,RSSI ZigBee,[login to view URL] c,c++,python(sensor level), assembly language, embedded [login to v...

    $15 (Avg Bid)
    $15 Avg Bid
    4 bids

    Hi Mashiur. My name is Alan Rupp and I have started a company that uses Zigbee and Z-wave sensors to monitor the activities of the elderly. I have a Shopify site built with Bold Subscriptions (for monthly recurring revenue) and Bold Product Options (for room and sensor description). I need to have that site simplified so that the user just needs to select the sensors they want. Users email add...

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    1 bids

    Hola soy Katia quiero compartir mi oportunidad con a tigo/9.5.4./802./1474/ realizando llamadas y ayudando a personas a vender sus casas creando comfianza profecionalismo e integridad en cada llamada . solo para personas que puedan comunicarse en ingles/espanol sean pacientes y perseverantes de espiritu de Grandeza y deseo de Exito para sus Vidas.

    $533 (Avg Bid)
    $533 Avg Bid
    16 bids

    I need a low voltage switch (4.5 - 12 DC) controlled by Z-wave or Zigbee, like a relay. Ultimate goal: to operate a solenoid by ON/OFF instruction from another Z-wave/Zigbee device (sensor), and I will not have access to 110VAC power. I can find modules, but I am not equipped to program, or even select most appropriately. Would love to hear from anyone with appropriate experience.

    $166 (Avg Bid)
    $166 Avg Bid
    26 bids

    We are looking for a developer to help us to migrate to a new zigbee wireless module. Now we use ETRX357-LRS zigbee and we want to switch to a solution based on nRF52840 IC. Now we use this zigbee module only to configure module, create network and exchange data between nods via UART using AT commands. There are not use any other function ot the modules like I/O pins, ADC, others. Our requirements...

    $583 (Avg Bid)
    $583 Avg Bid
    9 bids

    I want to simulate a zigbee network, where, a co-ordinator node sends data of 2.5kbps to all its nodes, in a cluster-tree network, the communication is only simplex, [login to view URL] only, ie. from the Zigee coordinator to all the other nodes, example, like a radio station. I want the simulation script be written in python, and Animation in NetAnim present in NS3

    $83 (Avg Bid)
    $83 Avg Bid
    2 bids