Cisco Jobs

I have a Zowee H155-381 5G router in service and I’m ready to hand its configuration over to someone who knows the device inside-out. The current setup works, but performance, stability, and security all feel sub-optimal. I’d like a specialist to connect (remote session is fine), review every setting, and guide me if it could be changed up side down Experience with Zowee hardware—or at least close Huawei-based models—is important so we can move quickly without trial-and-error. I’m available for real-time testing while you work.

I need an experienced low voltage technician to install a data network in a commercial building. ON SITE in USA The installation will include: - Ethernet Cabling - Network Switches - Patch Panels Ideal skills and experience: - Proficiency in low voltage cabling - Experience with commercial data network setups - Knowledge of networking equipment and installation Please provide relevant experience in your bid.

My Panasonic Ns500 PBX sits on but cannot “see” the rest of my network. Everything else flows through a FortiGate 60F firewall, a FortiSwitch 424E-Fiber core, and a FortiSwitch 124F-FPOE at the edge. I need someone to shape the network so this Panasonic box can handle VoIP communication smoothly. What I already know • The PBX will run pure SIP. • Dedicated VoIP rules on the FortiGate are required; simple, generic access is not enough. What I need from you • Review the current FortiGate policy set, VLAN layout, and switch port profiles. • Create or adjust firewall rules, NAT, and any SIP ALG or helper settings so that SIP registration, signalling, and RTP streams pass without one-way audio or dropped calls. • Tag or untag the appropriate swi...

I run several production VMware Cloud Foundation environments and need hands-on help keeping them healthy day after day. The main focus is operational work: lifecycle management through SDDC Manager, workload-domain maintenance, patching, upgrades, monitoring, and rapid incident response across vCenter, NSX-T, vSAN, and related components. You will act as my Technical Adoption Manager, becoming the primary technical point of contact for both the customer and our internal stakeholders. That means owning troubleshooting when things break, guiding best-practice configuration changes, and translating business requirements into clear technical actions during our regular cadence calls. Deliverables • Daily operational support during agreed coverage hours • Prompt resolution of in...

I need help connecting my already installed wired security cameras to my WiFi router at home. Ideal Skills and Experience: - Experience with wired security camera systems - Knowledge of WiFi network setup and configuration - Ability to troubleshoot connectivity issues - Prior work with home security systems is a plus

Desktop / System Engineer – Onsite (1-Day Assignment) We are seeking a hands-on Desktop or System Engineer to be onsite at a client location for one full day to support a small IT infrastructure refresh. You will act as the onsite engineer while a remote technical team remains on standby. Your primary responsibility will be to rack, cable, power up, and patch IT and network equipment (servers, switches, firewalls, desktops, and printers) strictly according to the diagrams and instructions provided in advance. You will also connect console or management cables to enable remote engineers to complete configuration tasks. Before wrap-up, you will perform basic end-user computing (EUC) checks, including light troubleshooting for desktops, laptops, and printers—verifying network c...

I’m looking for an experienced Wireless Network / IoT Engineer to help me design the correct setup for a solar-powered wireless IP camera. We already have the camera and solar panel, but we are struggling to select and combine the correct access point / antenna / network components to make everything work reliably. The task includes: • Recommending the correct access point or wireless bridge • Ensuring compatibility with a solar-powered camera • Advising on power consumption • Verifying range, stability, and bandwidth • Optional: diagram of the final setup No physical installation required, only remote consulting and hardware recommendation.

I have between two and ten new workstations that need to be taken from boxed parts to fully-operational machines. Every unit already has its CPU, motherboard, RAM, storage drives, graphics card, and standard peripherals on hand; I just need a reliable technician to install and configure them correctly. Once the hardware is in place I’d like you to load the operating system and the core software applications we use so that each computer boots straight into a ready-to-work environment. Driver updates, basic BIOS tweaks, and any firmware required for stability are expected as part of the job. The installation will take place on-site, and I’ll supply all components, licences, and network credentials. You bring the tools, know-how, and a methodical approach that leaves every machi...

I’m completing a networking and security module at school and the current assignment requires a fully-configured Cisco Packet Tracer project. If you’ve tutored or prepared Packet Tracer or such kind of assingment please help me

I have a 24U floor-standing network cabinet that needs to be installed in an office suite a few minutes from Boston Logan Airport. The cabinet will hold a stack of networking switches along with several patch panels, so stability, grounding, and clean cable management are critical. Here’s what I need from you: • Unbox, assemble, and anchor the 24U floor cabinet securely on the designated spot. • Mount and secure the switches and patch panels (all hardware is on-site). • Dress, bundle, and label the copper patch leads to maintain clear airflow and a professional finish. • Verify grounding and test basic connectivity once everything is in place. • Leave the area tidy and haul away packing material. Acceptance criteria: the cabinet must sit level, doo...

I need an experienced enterprise architect to help me translate the TOGAF framework into a practical, working model for my IT department. The goal is to produce an end-to-end Enterprise Architecture proposal that sharpens, standardises and ultimately streamlines every IT Service Management process we run today. While the spotlight is on ITSM, I do want the engagement to look horizontally across the department so we can raise the maturity level of Incident, Change and Configuration Management at the same pace. In short, every core process should emerge better defined, measured and governed. Here is what I expect to walk away with: • A current-state assessment mapped in TOGAF ADM terms (Baseline Architecture, capability heat-map, pain-points). • A target-state service...

We are currently looking for freelance Network Engineers in your city to support ongoing onsite requirements for our customers and act as the eyes and hands for the remote configuration team. Typical visit • Arrive at the customer location, meet the local contact, and review the work order • Rack, stack, and cable routers, switches, firewalls, or wireless access points exactly as marked on the network diagram. • Power on the gear, provide console access back to our remote engineers, and stay on-site while they push the configs and run their tests. • Perform basic physical troubleshooting if something doesn’t light up as expected and coordinate with the remote team until sign-off. What you need to bring Your own laptop, a console cable, and any basic hand tools y...

I need a skilled professional to assist with infrastructure management in our data center, specifically focusing on hardware maintenance. Key Responsibilities: - Maintain and repair servers, networking equipment, and storage devices. - Ensure optimal performance and reliability of all hardware. - Collaborate with the team for capacity planning and implementing cooling and power solutions. Ideal Skills and Experience: - Extensive experience in data center hardware maintenance. - Strong knowledge of servers, networking equipment, and storage devices. - Problem-solving skills and ability to work under pressure. - Certifications in relevant areas (e.g., CompTIA, Cisco, etc.) are a plus. Looking for someone who can ensure our infrastructure runs smoothly and efficiently.

I’m expanding our field team and need on-site technicians who can rack, cable, and turn up routers, switches, and firewalls across the UAE, Bahrain, Saudi Arabia, most African nations, and a wide stretch of Eastern Europe—including Poland, Hungary, the Czech Republic, Greece, Slovakia, Slovenia, Croatia, Bulgaria, Romania, and Turkey. Most of the gear you’ll see is Cisco—Catalyst, Nexus, Meraki—as well as Aruba, Lanner, and the occasional white-label device. Jobs range from a single cabinet in an office to multi-rack deployments in Tier III data centers or rugged industrial plants. You’ll work with my remote engineering team over Webex or Teams while you handle the physical layer: unboxing, rack & stack, structured cabling, console access, initial i...

We are currently looking for freelance Network Engineers in your city to support ongoing onsite requirements for our customers and act as the eyes and hands for the remote configuration team. Typical visit • Arrive at the customer location, meet the local contact, and review the work order • Rack, stack, and cable routers, switches, firewalls, or wireless access points exactly as marked on the network diagram. • Power on the gear, provide console access back to our remote engineers, and stay on-site while they push the configs and run their tests. • Perform basic physical troubleshooting if something doesn’t light up as expected and coordinate with the remote team until sign-off. What you need to bring Your own laptop, a console cable, and any basic hand tools y...

I need an experienced system engineer to spend a single day at our client’s site acting as the hands-on field resource while my remote team handles the configuration. Your focus will be the physical side: racking, cabling, powering on, patching, and verifying a mixed stack of servers and switches, desktops and laptops, plus printers and firewalls. On arrival you’ll follow the step-by-step build sheet we provide, attach console or management leads so the remote crew can take control, then run quick power-on and connectivity checks. Before leaving, test that users can log in, reach the network shares, and print without issues. A concise wrap-up note (what was completed, any snags, and current device status) closes the assignment. Deliverables • All listed equipment f...

My Cisco Firepower FPR-4110-K9 is due for a full software refresh and I need a Cisco-certified network-security specialist to guide me through it in real time. The immediate task is upgrading both ASA and ASDM; I don’t yet have the latest images or the necessary Cisco download privileges, so part of the engagement is helping me obtain (or using your own account to retrieve) those files through authorized channels only—no third-party sites. We will connect via screen-share, SSH, or direct console so you can walk me through each step, verify integrity, back up the current configuration, and perform the install with minimal downtime. Deep familiarity with the ASA code train on Firepower 4100 series hardware, version prerequisites, and ASDM setup is essential, along with comfort w...

I need a hands-on network engineer for a single day of onsite work. Your main task will be to rack, stack, power up, and cable two types of devices—routers and switches—exactly as shown in the network diagram. Once everything is patched, you’ll open console access so our remote team can jump in and finish the configuration. Deliverables for the day • Routers and switches physically installed, powered, and neatly patched • Verified console connectivity for each device • Any laptop or printer glitches resolved or clearly documented • A brief hand-off report summarizing what was done and noting anything that needs follow-up Bring your own basic toolkit (screwdrivers, cable tester, console cable, etc.) and be comfortable working independently whi...

Desktop / System Engineer – Onsite (1-Day Assignment) We are seeking a hands-on Desktop or System Engineer to be onsite at a client location for one full day to support a small IT infrastructure refresh. You will act as the onsite engineer while a remote technical team remains on standby. Your primary responsibility will be to rack, cable, power up, and patch IT and network equipment (servers, switches, firewalls, desktops, and printers) strictly according to the diagrams and instructions provided in advance. You will also connect console or management cables to enable remote engineers to complete configuration tasks. Before wrap-up, you will perform basic end-user computing (EUC) checks, including light troubleshooting for desktops, laptops, and printers—verifying network c...

Digital Chain of Custody for Forensic Evidence ​Concept: A system for police and legal teams to track digital evidence (logs, hard drive images, CCTV footage) without tampering. ​The Problem: In court, digital evidence is often dismissed because the defense claims it was tampered with after seizure. ​The Solution: When evidence is collected, a cryptographic hash (SHA-256) of the file is generated and stored on a Blockchain. Every time the evidence is "checked out" or viewed by an officer, a transaction is recorded. If the file hash changes even by one bit, the Blockchain rejects it. ​Tech Stack: ​Frontend: React.js or Flutter. ​Blockchain: Ethereum (Sepolia Testnet) or Hyperledger Fabric (for private permissioned access). ​Storage: IPFS (InterPlanetary File System) to store the a...

I’m preparing to replace our legacy MPLS links with the SD-WAN service we’ve already contracted and need an on-site engineer in Hyderabad, Telangana to drive the entire cut-over. The environment is small—fewer than 50 routers, switches, firewalls, and edge devices—but the migration still has to be planned and executed with zero-downtime goals. Here’s what I expect: • Audit the current MPLS topology and document every dependency. • Translate existing QoS, security and routing policies into the new SD-WAN orchestrator. • Build and stage configs on the vendor-supplied edge appliances. • Coordinate with our carrier and internal teams to schedule and perform the live switchover. • Validate traffic flow, fail-over behavior, and app...

engo que hacer un proyecto en Packet Tracer sobre la conexión de redes de la empresa COCACOLA, el proyecto consta de 3 lans que se conectan para hacer una WAN esta la lan matriz de 4 pisos, la lan sucrusal de 2 pisos y la lan fabrica El data center de la empresa se encuentra en la matriz en el segundo piso, en la matriz cada piso tiene su propio DIF, en la sucursal hay un único DIF para los 2 pisos El proyecto debe ser escalable, debe tener costo-beneficio adecuado, debe tener redundancia para las seguridad. Matriz: Piso 1: 6 pc (1 pc pertenece a la venta de helados y vigilancia de inventario, 1 pc de gestión de panaderia y vigilancia del mostrador, 2 pc de autogestión para que el empleado pueda visualizar sus roles y turnos, 2 pc estacion de logística ...