Embedded Systems Jobs

I have an air-quality monitor prototype on breadboard and now need a production-ready PCB. The core of the board will be an Arduino Nano, linked to Wi-Fi for cloud logging and OTA updates. Only a particulate-matter sensor has to be integrated at this stage, but I’d like the layout to leave space and headers so a future gas sensor can be dropped in without a full redesign. What I expect from you: • Complete schematic, PCB layout and clean routing for the Nano, Wi-Fi module, particulate sensor, regulated power path (USB-5 V input and Li-ion option), plus an on-board antenna or footprint. • Clearly labelled break-outs for I²C, UART and an SPI port, and pads for an optional 0.96" OLED or similar display. • All design files (KiCad or Altium), Gerbers, dr...

I’m putting together a compact desk ornament that spins on command, and I need a complete PCB solution to drive the rotation reliably. The ornament will only move when a small switch is flipped—no sensors, no remotes, just simple manual control feeding a quiet motor. Main Features: • main power source is 5V from USB to DC power jack connected to board via JST-PH cable 2pin socket. • 3.7V 800mAH Lithium chargeable battery as backup power source, connected via JST-XH cable. • 3-way SPDT switch(on, off, timer) connected to the PCB via a JST-XH cable. • 3V DC motor with peak current around 3A, connected to board via JST-PH(2pin) • 2 mounting points (M3 size to allow M2.5 bolts) Here’s what I’m after: • Schematic and PCB layout for a ...

I need a robust, well-documented software or a tool that lets the Zowee H155-381 operate with several SIM cards instead of only one. The job involves reverse-engineering the device’s firmware and hardware interfaces, pinpointing the current SIM-handling logic, and producing a tool that can reliably switch between multiple SIMs on demand. The core requirement confirm that you will deliver: A working unlock software for Zowee H155-381 same model shown at pictures i sent that single or double click do steps automatically and make every router we link and use the software on it support multi carriers sim card normally without future re locking Network/SIM lock removal, so the device can be used with other carriers normally without any obstracles Step-by-step instructions (easy...

I need an expert to develop embedded algorithms for our OWLY predictive maintenance platform. The platform uses fused vibration and acoustic sensing to detect early equipment faults in home appliances, specifically washing machines, dryers, and refrigerators. Key Requirements: - Convert sensor data into actionable equipment health diagnostics. - Focus on early fault detection for motors, bearings, and gearboxes. Ideal Skills and Experience: - Strong background in embedded systems and algorithm development. - Expertise in signal processing and sensor data analysis. - Experience with home appliance maintenance or diagnostics. - Familiarity with machine learning techniques is a plus.

Hello , I need a complete design for a compact consumer-electronics board that revolves around a PIC microcontroller. The scope spans three tightly-linked parts: • PCB hardware – Produce the schematic and multilayer layout in Altium Designer, include all libraries you create, and deliver the full manufacturing package (Gerbers, drill files, pick-and-place, and a PDF schematic). • MCU firmware – Write well-commented code in MikroBasic (or another PIC-friendly tool if you justify the switch). The firmware must read multiple sensors, exchange data through an efficient serial protocol, and use smart power-saving modes to stretch battery life. Please supply project files, compiled HEX, and a short flashing guide. • PC interface – Build a Windows utility in VB....

I need a complete design for a compact consumer-electronics board that revolves around a PIC microcontroller. The scope spans three tightly-linked parts: • PCB hardware – Produce the schematic and multilayer layout in Altium Designer, include all libraries you create, and deliver the full manufacturing package (Gerbers, drill files, pick-and-place, and a PDF schematic). • MCU firmware – Write well-commented code in MikroBasic (or another PIC-friendly tool if you justify the switch). The firmware must read multiple sensors, exchange data through an efficient serial protocol, and use smart power-saving modes to stretch battery life. Please supply project files, compiled HEX, and a short flashing guide. • PC interface – Build a Windows utility in VB.NET ...

I’m embarking on an ambitious project to launch a pair of operating systems — one for mobile devices and one for desktop / laptop computers. I deliberately chose Both platforms because I need a seamless experience across phones, tablets, and traditional PCs, without depending on Android, iOS, Windows, macOS, or any other pre-existing stack. The mobile side will be entirely Custom, so we’re starting from a clean slate and can define the kernel, UI layer, and security model exactly as we want. Here’s the flow I have in mind. First, we’ll specify hardware targets and draft the architecture (kernel type, driver model, boot process). Next comes a minimal viable OS for each platform: the desktop build must boot, recognise core peripherals (storage, networking, disp...

We are looking for an experienced developer to build a small Linux utility that communicates with a U.2 NVMe SSD over SMBus (NVMe-MI). The project involves low-level hardware and software work, not application development.

I need help building a working prototype of a small interactive toy. The prototype requires: A pop-up mechanism (using solenoids, springs, and/or small motors). Integration with Raspberry Pi or Arduino for control. Wiring/programming to operate the mechanism. A simple phone/web app to trigger the toy remotely. Requirements: Experience with mechanical design and prototyping. Hands-on skills with Raspberry Pi/Arduino electronics. Must show past project work (photos, CAD, or GitHub). Deliverable: A working physical prototype (not just design files) that demonstrates the pop-up mechanism controlled by Raspberry Pi/Arduino. Budget: Budget will be discussed based on scope and experience. Please provide: What’s your estimated cost? How did you arrive at that number (materials, ...

igid-Flex PCB Design for Smart Ring Wearable I’m developing a compact smart ring device and need an experienced PCB engineer to design a rigid-flex PCB. The design includes: A flex PCB section (polyimide) that wraps around the inner circumference of a ring Two gold-finished contact pads on the flex section that interface with the user’s finger A rigid PCB section that connects to the flex and hosts electronics Scope of work: Design a single-piece rigid-flex PCB Flex section with exposed ENIG pads (dimensions and spacing will be provided) Proper coverlay usage and manufacturable rigid-flex stack-up Clean routing of high-impedance analog signals from flex to rigid section Mechanical alignment features and reliable rigid-flex transition Requirements: Proven experience...

I need a control system for an RO (Reverse Osmosis) water filtration setup. The system should manage a water pump, measure the depth of water in a tank, and integrate inline TDS meters (total dissolved solids) before and after the membrane filtration. Key Requirements: - Control water pump: automate and manually switch on/off - Measure and display water depth, TDS levels, and pump status on a color screen - Auto and manual override settings - Combination of touchscreen and physical buttons for interface - Enclosed in a protective box Ideal Skills & Experience: - Experience in designing control systems - Proficient with electronic interfaces (touchscreen and buttons) - Knowledge in water filtration systems and TDS meters - Ability to create user-friendly display layouts Looking forwa...

We are looking for an experienced Product Design Engineer (Mechanical + Electrical) to lead the prototyping of a high-end, silent benchtop cocktail machine. Unlike traditional machines, this device relies on solid-state physics rather than mechanical moving parts to replicate the thermodynamics of a professional bartender. We have a complete Product Requirements Document (PRD) and preliminary architecture. We need you to take these requirements and build a fully functional "looks-like, works-like" prototype. The Engineering Challenge: The device replaces mechanical shaking and stirring with precision energy application. You will be engineering a system that integrates: Ultrasonic Cavitation (40kHz): For instant emulsification. Thermodynamics: High-power Peltier (TEC) modules ...

I’m building a small sports POV camera system (VisionCam V1) using a Raspberry Pi Zero 2 W + Raspberry Pi Camera Module 3 Wide (IMX708). I need (A) a simple power/charging board design and (B) a reliable recording service/software for the Pi. Important: My total budget is $600 max for the full scope. Please do not apply if your quote will exceed $600. ⸻ A) Power / Charging Board (Pi Zero 2 W) Goal: Stable power + safe charging for a LiPo, designed for a compact wearable camera. Requirements: • LiPo charging via pogo-pin contacts (no open USB charging port preferred) • Power-path / load sharing so the device can stay on while docked/charging (no reboot) • Stable 5V output to Pi Zero 2 W (with enough current margin) • Battery protection features (basic prote...

Overview I’m looking to develop a robust UART to UDP bridge on STM32 for handling large binary frames and NMEA data. The aim is to enhance data transmission reliability between devices. Scope of work - Develop a UART RX system with DMA and ring buffer on STM32 for lossless data reception. - Implement UDP TX using LWIP for sending data over UDP with configurable IP and port. - Handle large frames by sending in single datagram or using fragmentation protocol (frame_id, chunk_index, total_chunks, crc) for payloads around 10KB. - Optional: forward NMEA data on a separate UDP port. - Deliver complete CubeIDE project and documentation. - Test and verify UDP reception with log/pcap/wireshark or video to prove valid frame transmission. Additional information I’ll accept delivery a...

I already have a working PCB built around an Xsens MTi-630 IMU and an NXP MKV56 microcontroller. What I need now is a technician who can revise the existing firmware so the remote camera head delivers rock-solid motion compensation on set. Your task is to design and embed a custom sensor-fusion routine that blends gyro, accelerometer, and magnetometer data from the MTi-630, then feed that fused orientation into the motor-control loop over CANopen. I’m aiming for a balanced mix of speed and accuracy so operators never feel lag yet still enjoy drift-free performance during long takes. You will be starting from my current codebase (MCUXpresso / NXP SDK), which already handles basic hardware abstraction and CANopen messaging. The focus is on: • Writing or adapting a quaterni...

I am embarking on a full-stack build of a humanoid companion robot whose number-one mission is caring for an infant from birth through age five. Beyond the usual chore-support and graceful household navigation, the robot must excel at three core caregiving abilities: • Feeding – from bottle to basic solids, with portion control, temperature checks, and spill detection. • Diaper changing – autonomous removal, cleaning, and secure re-diapering, tracked in a hygiene log. • Health monitoring – continuous vitals, posture, and environmental safety checks, with instant mobile alerts. Rich, natural interaction is essential. The robot should talk and sing lullabies, entertain with simple games, and read stories or show age-appropriate educational content...

I need an experienced electronics/PCB engineer to design a reliable, 24/7-operating traffic light controller PCB. This is a safety-critical system (not a hobby project). SYSTEM: • MCU: ESP32 • Load: 220VAC traffic light LED modules • Outputs: ~19 relay-controlled channels • Operation: Continuous (24/7) RELAY CONTROL: • Relay outputs driven via 74HC595 shift registers (SPI-style) • 3 × 74HC595 chained • OE pin must have hardware pull-up (outputs OFF at boot) • ESP32 enables outputs only after startup • Relay drivers with proper flyback protection FAILSAFE / SAFETY: • Master relay/contactor that cuts power to ALL lamp outputs • Must drop on: - ESP32 crash - Watchdog timeout - Power instability • Safe power-up and fail...

I’m building a CM5-based camera system and need an experienced hardware engineer to design a custom CM5 carrier board that supports an M.2 2230 A+E (PCIe) AI accelerator module (Hailo-class). This is for post-session AI processing (clip suggestions/tagging), not live gameplay. Scope / Requirements: • Design CM5 carrier board (schematic + PCB layout) • Route PCIe from CM5 to M.2 2230 A+E Key socket • Power design (stable rails for CM5 + M.2 module) + ESD/protection • Include required connectors for camera workflow (details will be shared after hire) • Provide mechanical notes for extra retention of M.2 module (screw/clamp/support pad) • Support bring-up/testing guidance Deliverables (Non-negotiable): • Full schematics + PCB source files (KiC...

I'm looking for a simple laser tag prototype using ESP32 and IR technology. This is for concept testing, not a final product. Essential features: - Scorekeeping - Player detection - Team identification Additional feedback mechanisms would be a plus but are not mandatory. Ideal skills and experience: - Experience with ESP32 and IR communication - Background in game mechanics for scorekeeping and player detection - Ability to develop a user-friendly prototype Please provide samples of similar work. Also looking for someone working out of India so that I can get my hands on the final prototype, no matter how simple it is.

I need a robust, well-documented software or a tool that lets the Zowee H155-381 operate with several SIM cards instead of only one. The job involves reverse-engineering the device’s firmware and hardware interfaces, pinpointing the current SIM-handling logic, and producing a tool that can reliably switch between multiple SIMs on demand. The core requirement confirm that you will deliver: A working unlock software for Zowee H155-381 same model shown at pictures i sent that single or double click do steps automatically and make every router we link and use the software on it support multi carriers sim card normally without future re locking Network/SIM lock removal, so the device can be used with other carriers normally without any obstracles Step-by-step instructions (easy...

I’m putting together a dedicated, distraction-free reading device and need a hardware specialist who can take it from concept to working prototype. The display has to be an AMOLED panel of at least 11 inches—no compromises on that vibrant contrast. This will be a reading-only tablet, so efficiency, eye comfort, and battery life have priority over raw processing power. Wireless connectivity is essential for loading books and updates; Wi-Fi is mandatory, Bluetooth is optional. In addition, I want physical page-turn buttons on the bezel so users can flip pages without touching the screen. Touch input itself is welcome but not a requirement. Here’s what I’m expecting from you: • Source and validate the 11″+ AMOLED display and its driver board • Desi...

Hiring Freelancers – AI / Computer Vision & Edge Systems Confidential Enterprise Project (NDA Required) We’re looking to engage a few experienced freelancers for a confidential, enterprise-grade technology project involving computer vision and edge AI. The work is part of a real production deployment (not a research project or demo). Detailed project information will be shared only after shortlisting and NDA signing. Engagement Details Type: Freelance / Contract Duration: ~3–4 months (extension possible) Commitment: Full-time preferred (role dependent) Work mode: Remote (India preferred) Start: Immediate / near-term Open Roles 1. Computer Vision / Machine Learning Engineer What we’re looking for: Hands-on experience with object detection / visual recognition Exp...

For my current university project I have to build a compact PCB whose only job is to collect data from several temperature sensors and route those readings to the rest of my prototype through simple wired connectors. Everything must be laid out and modelled inside Fusion 360, right down to the housing that will protect the board once it is fabricated. Here is what I need from you: • Create the full schematic and board layout in Fusion 360’s electronics workspace, optimised for straightforward sensor-integration and robust wired headers. • Export clean Gerber/Drill files plus the native Fusion 360 design so I can iterate later. • Model a 3-D printable enclosure in the same project file, dimensioned precisely to the finished PCB, with openings for the temperature-...

Project Brief: Stealth-Modified Automatic Parking Disc (Certified for Public Road Use in Germany) Project Goal: I want to technically modify a certified electronic parking disc approved for use in Germany (must have an official certification number and ECE approval), so that it continues to automatically update the displayed parking time even after the vehicle has been parked. This modification must be invisible and undetectable from the outside, meaning the device must look and behave like the original product to any observer or parking enforcement officer. Background: Standard electronic parking discs are designed to detect when a vehicle is turned off and then freeze the display at the next permissible half-hour mark. This allows parking enforcement to determine how long the car has b...

I want to turn my stock WowWee MiP into a fully-independent companion with far more capability than the original phone-controlled toy. The big push is to give it functional robotic arms—servo-driven, proportional, and strong enough to perform simple pick-and-place demos—while keeping the self-balancing chassis intact. To drive everything, I need an internal “brain” (Raspberry Pi, ESP32, or another MCU you’re comfortable with) that can: • run onboard code without any phone connection • store multiple programs in flash so I can swap behaviors on the fly • process a forward-facing camera for navigation and object tracking • handle voice-command triggers and speak back in character using a small speaker For interaction I’m l...

I am rolling out an in-dash Android interactive display and need a seasoned AOSP specialist to turn the stock source into a lean, security-hardened custom ROM. The target hardware is a car-grade unit that hosts a camera alongside proximity and accelerometer sensors, so the build must include the right HALs and permissions for those components. What I want you to handle: • Fork the AOSP branch that best matches our SoC, import or craft the correct device tree and board-config, and fine-tune the kernel where necessary. • Strip every Google Mobile Service while preserving base Android stability. • Apply low-level security tweaks (SELinux policy work, verified boot, hardening flags). • Set up seamless OTA delivery (delta or full images) so field upgrades stay painless. &bu...

I already have the full AOSP source checked out and the proprietary blobs for a piece of dedicated in-vehicle hardware. What I need now is an Android engineer who has been through the full custom-ROM cycle before and can take the lead on turning that raw tree into a production-ready build. Scope of work • Strip every trace of Google Mobile Services and replace only what is strictly necessary with open-source or in-house components. • Harden the system: SELinux in enforcing mode, verified boot, secure default props and permissions, plus any kernel-level mitigations you normally deploy. • Update or create the device tree and BoardConfig so the microphone, speakers, Bluetooth and the built-in camera work flawlessly; the unit does not rely on a touchscreen, so please make...

The embedded system comprises 2 STM32 boards connected to their own 7 sensors, 1 motor, and 3 relays. Each is connected to the central Raspberry Pi 4 board. The RIGHT STM32 board also has a TFT ST7789 2inch display. The Raspberry Pi has its own 5-inch display (connected via HDMI) and is connected to a battery BMS via UART and controls the ON/OFF switching of the exoskeleton system driven via a 48V 10A relay. The Raspberry Pi also controls the operation of a 5V air-pump via a relay able to deliver 1.5A We require the following tasks to be carried out: user interface (GUI) developed for the STM32 to drive the ST7789 display. developed for the Raspberry Pi display. for the Right-leg STM32 microcontroller. for the Raspberry Pi. for the Left-leg STM32 microcontroller.

I'm looking for an experienced programmer to develop RF modules based on MTK chips. The primary functionality required is signal reception, specifically for digital signals. This project extends to firmware modification for new hardware of the F21 Pro model, adapting it to work with US bands and ensuring wide usability. Key Requirements: - Modify NV data in the firmware to suit the new chipset (likely running on LWTG) and adapt this file for US band compatibility. - Ensure the firmware can be flashed easily to multiple phones and that a complete backup source file is provided. - Conduct thorough compatibility testing for the firmware. Ideal Skills and Experience: - Strong background in RF engineering and programming. - Expertise with MTK chipsets and NV data modifications. - Experie...

I’m ready to move from concept to working prototype on a home-security robot that focuses solely on emergency response—specifically, detecting break-ins and sending instant alerts. The core idea is a mobile unit that patrols designated zones, recognises unauthorised entry, and pushes real-time notifications (sound, SMS, or app-based) to my phone while triggering audible deterrents on-site. Here’s the shape of the work: • System architecture: advise on the right combination of sensors (camera, PIR, ultrasonic, mic), onboard processing (Raspberry Pi, Jetson, or similar), and wireless protocols so the robot can run edge-based computer-vision without relying on the cloud. • Detection pipeline: develop or integrate a lightweight model—OpenCV or TensorFlow-L...

I’m building a proof-of-concept access controller that uses Fujitsu’s PalmSecure sensor on a Raspberry Pi. I already have the broad concept sketched out; what I need is a partner who can take it from idea to a working, desk-tested prototype. Hardware setup, software development, and full PalmSecure integration are all in scope. That means choosing the right Pi model, wiring the PalmSecure unit and any relays/LED indicators, and making sure the power budget is solid. On the software side I’m leaning toward Python or C++ on Raspberry Pi OS, but I’m open as long as the PalmSecure SDK runs reliably on ARM. The application must handle: • User authentication via palm-vein templates • Secure data storage and quick retrieval of templates and event logs &bull...

Job Description:- We are a registered company coordinating academic projects in the Embedded / ECE domain for Indian universities. We are looking for one reliable freelance Embedded Systems developer for long-term, project-wise collaboration. This is not a full-time job. Work will be assigned per project. Scope of Work Develop Embedded / ECE hardware or simulation-based projects Support domains like: Embedded Systems, IoT, ARM / Microcontrollers FPGA / VLSI (optional) Control systems / Sensors / Automation (as applicable) Deliverables per project: Working code / simulation / hardware logic Result screenshots / output proof Project report content (chapter-wise) Project PPT content IEEE conference paper draft Scopus journal extended paper draft Support 1–2 rounds of re...

I have a production-ready, IGBT full-bridge welding inverter that already powers both TIG and MMA processes, yet the embedded side still needs a final expert pass before release. The control board is built around 8051 and STC MCUs running Keil C51 firmware, and every line of code directly shapes arc stability, HF start, AC balance, soft-start, and safety interlocks. The short-term goal: review, tidy, and extend the existing code so it drives the power stage flawlessly in TIG and MMA, AC and DC. That means refining PWM timing, gate-drive dead-time, current-feedback filtering, and all the little state-machine details that separate a decent welder from a great one. Core tasks and deliverables • Audit the present C51 codebase, flagging race conditions or timing pitfalls. • Im...

I'm looking for an engineer or team to create a hockey robot defender. The robot will need to: - Block shots - Intercept passes It should be able to operate on both indoor and outdoor rinks. Primary control will be through pre-programmed routines. Ideal skills and experience: - Robotics engineering - Experience with remote control and pre-programmed systems - Knowledge of outdoor and indoor sports environments, particularly ice hockey.

Job Description (Requirements Only) We are seeking a highly experienced embedded systems and drone software engineer to help develop a next-generation, proprietary drone show platform. The ideal candidate must have deep expertise in flight control firmware, UAV swarm systems, and hardware-level integration. Required Qualifications Extensive experience with PX4 firmware development Strong background in embedded systems (C/C++) Proven experience working with UAV flight controllers Deep understanding of MAVLink protocol and flight control architectures Experience integrating GPS/RTK systems (Ublox preferred) Experience with PWM output control and hardware-level signal integration Experience designing safety-critical systems and fail-safe logic Strong knowledge of swarm drone coordin...

Project: Calling / Video Conferencing App (Zoom-like) We are looking for an experienced developer/team to build a calling and video conferencing application similar to Zoom for web and mobile platforms. Core Requirements: One-to-one and group audio & video calling Real-time conferencing with low latency User authentication & meeting management (create, join, schedule) Screen sharing feature Chat during meetings Call controls (mute, video on/off, end call) please share me your samples work this is big client

I'm seeking an experienced IoT Systems Architect to develop a solution for monitoring environmental conditions. Key Requirements: - Digital Twin Integration - dMRV (digital Monitoring, Reporting, and Verification) - Real-time Dashboards for Data Visualization Ideal Skills and Experience: - Expertise in IoT architecture - Experience with digital twins and dMRV - Strong background in environmental monitoring - Proficiency in developing real-time dashboards Please provide examples of similar projects and your approach.

I need a compact, production-ready PCB that reliably converts an EDP 1.2 video stream into a MIPI CSI-2 output so I can interface an existing embedded panel with a camera-centric SoC. The job is purely about signal conversion; no additional processing or scaling is required. The core of the work is selecting a proven EDP-to-CSI bridge IC, building a clean high-speed schematic around it, and laying out a board that respects all impedance and length-matching rules for both the EDP and CSI-2 differential pairs. Please keep the stack-up simple enough for standard 4-layer manufacturing while still meeting the 100 Ω/90 Ω requirements. To speed integration on my side I also need the power-tree designed, the necessary reference clocks routed, and all test points clearly labelled fo...

I need help setting up two Nema 17 stepper motors to be controlled remotely via two ESP32 boards. One board will be in the remote and the other in the receiver. Requirements: - Manual control of stepper motors - Input commands using an analog joystick Ideal Skills and Experience: - Experience with ESP32 and stepper motors - Familiarity with joystick integration - Strong knowledge of manual control systems Please provide a detailed plan and relevant experience in your bid.

I’m building software for an industrial-grade Internet of Things device and need a developer who can take it from concept to a reliable, field-ready application. The work centers on firmware and companion software that can collect sensor data, push it to the cloud, and expose a clean API for downstream analytics or dashboards. Core needs • Firmware or embedded code that runs stably on the target hardware (ARM-based MCU) • Edge logic for data aggregation, local caching, and basic alert rules • Secure OTA update mechanism and device provisioning flow • Cloud integration (MQTT or REST) with authentication and encryption in place • A lightweight monitoring dashboard or reference client that demonstrates data ingestion and control commands I already ha...

I already have the full Bill of Materials and a set of clear reference photos; what I still need is a production-ready PCB layout that ties everything together. Your task is to handle both the component placement and the complete routing of a balanced audio driver board that runs from a single 5 V input and generates ±12 V rails internally. There are no fixed dimensions, so you can choose whatever outline best supports clean signal paths and sensible power-ground separation. The only mandatory hardware interface is XLR—please keep the footprint orientation practical for panel mounting. Preferred deliverables • Editable design files in KiCad, Altium,—or another mainstream tool that supports Gerber export • Gerber, drill, pick-and-place, and centroid files re...

Looking for a mature profibus software solution for raspberry pi

Need software enginner who will help for STM32 Programming Skills required : 1. C Programming and debugging 2. should know Free RTOS Concepts 3. Shall be able to prepare Design using state flow diagram and flow charts 4. shall be able to write the test cases to test the project in excel sheet TASKS are : 1. make PWM OUT Woking and control wheels 2. Make the joystick Inputs working and get the ADC inputs from Joystick (this i have already done , half rest needs to be continued) Digital Input work as E-STOP input 4. Make Proximuty sensor and Ultrasonic sensor working With this i am going to prepare a Robotics vehicle for my FARM For sparying purpose . Future Tasks : 1. Make the input working using LORA and INTERNET (may be SIM800 Module) Process : 1. Requirement document will be pr...

I have an existing ATMS PCB design with current dimensions of 120 mm (L) × 55.55 mm (W). I am seeking an experienced PCB layout designer to reduce the overall board size by up to 20 mm in both length and width through layout optimization. Scope of Work / Requirements: * The schematic must remain unchanged. * No component replacement, modification, or value changes are allowed. * Only PCB layout optimization and placement/routing improvements are permitted. * Electrical functionality must remain 100% identical to the existing design.

I’m working on an STM32H7 design and I need the ST Acoustic_SL middleware added cleanly to my firmware so I can start experimenting with the Sound Localization feature right away. The CubeMX-generated project is already set up and building under STM32CubeIDE; what’s missing is a fully integrated Acoustic_SL stack (latest release) with all required dependencies, paths, and initialization code. Here’s what I’m expecting from you: • Import Acoustic_SL into the existing STM32H7 project and resolve every include, linker, and memory-map requirement. • Provide a minimal example (e.g., mic array capture + X-Y angle printout over UART) that shows Sound Localization working on real hardware. • Supply a short read-me that explains any CubeMX tweaks, middl...

I need a clean, intuitive user interface built in DGUS for a 7-inch DWIN DMG touchscreen that will serve as a basic attendance system. The goal is to guide employees quickly through check-in and check-out on the display itself, with all interaction handled by touch. Here is what I expect as the final hand-over: • Complete DGUS project folder with all pages, fonts, images, and configuration files ready to flash onto the DMG series display. • Clear naming of variables, addresses, and touch regions so I can tie them to my microcontroller’s serial protocol without guesswork. I already have the hardware on my bench, so I will handle flashing and live testing; you focus on the UI logic, layout, graphics, and DGUS configuration. Simple, flat icons and legible fonts are pref...

I have a Siemens LOGO PLC on my network that speaks Modbus-TCP and I need a clean, well-commented Python script that can both read from and write to its registers using the pyModbusTCP (or compatible) library. The goal is to end up with a small module I can drop into a larger project, so clarity and reliability matter more than flashy UI. Here’s what I expect: • A single .py file that opens the connection to the LOGO (IP, port and slave ID must be easily configurable at the top of the script). • Functions I can call for typical tasks: read_coils, read_holding_registers, write_single_coil, write_single_register (or their pyModbusTCP equivalents). • An example section (under if __name__ == "__main__": ) that demonstrates the above functions in action wi...

I need a seasoned PCB designer located in Pakistan who can take a concept right through to production-ready files. The boards you create must interface reliably with Arduino, Raspberry Pi, and FPGA modules, so familiarity with their pinouts, signalling levels, and power budgets is essential. You’ll start by translating my functional requirements into clear schematics, then handle the full PCB layout, component selection, and DFM checks. I expect well-organised source files plus manufacturing outputs—Gerbers, drill files, pick-and-place, and an accurate BOM—with every revision traceable. If you prefer Altium, KiCad, Eagle, or OrCAD that’s fine; just let me know which environment you’ll use so I can open the files on my end. Because these boards may evolve...

45w Intelligent dual port charger

I need a miniature sine-wave transmitter board. I will supply the exact antenna footprint and the precise target frequency (it will be somewhere below 100hz, specified down to the decimal). Your task is to design a PCB smaller than 2 cm × 2 cm that generates a clean, low-distortion sine wave, feeds it to the antenna, and runs for at least one month on a single CR2032 coin cell. It has step sweep formula Long-term frequency stability, minimal harmonic content, and ultra-low power consumption are critical. Feel free to use discrete components, a low-power MCU with DAC, a numerically controlled oscillator, or any other architecture that can hit the spec while staying inside the tight footprint and power envelope. Deliverables • Complete schematic and PCB layout (KiCad, Altium...