Find Jobs
Hire Freelancers

ELectronics Design

$25-50 AUD / hour

Cancelled
Posted almost 5 years ago

$25-50 AUD / hour

Electronics Design, new pcb development for a wireless sensor network device. Internet of things enabled. Atmel microprocessor and wireless transceiver, with analog and digital IO.
Project ID: 19728552

About the project

25 proposals
Remote project
Active 5 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
25 freelancers are bidding on average $34 AUD/hour for this job
User Avatar
Hi I am experienced electronics engineer with more than 9 years of experience. I can do it for you. I have completed a number of projects on IOTs and network sensor devices Please review my profile to see the feedback from my previous employers Regards
$40 AUD in 40 days
4.8 (274 reviews)
8.1
8.1
User Avatar
Hello sir, I have experience in designing electronics circuits and can develop hardware compatible smartphone and PC based apps. I also have done a lot of IoT projects and can transform your idea into a fully working product. If you wish we can discuss details in chat. Thanks
$40 AUD in 40 days
4.8 (71 reviews)
7.2
7.2
User Avatar
hello i am a computer engineer,i have masters in computer engineering,i have experience for more than 8 years in arduino and electronics i can make to u the required pcb for ur WSN quickly and effeciently and deliver to u all the required files
$30 AUD in 40 days
5.0 (34 reviews)
5.7
5.7
User Avatar
Hi there, IoT is my strongest embedded system field. I have done vast of projects since 2005. You may receive support in all product developing cycle such as circuit design, PCB layout, prototype, assembling, firmware, testing. Since you didn't describe your product, I don't send you some references. So let's discuss to see how best am I to do this project for you.
$30 AUD in 40 days
4.9 (29 reviews)
5.5
5.5
User Avatar
Dear Sir, We are a small R & D company, based in Bulgaria, Europe. We specialize in developing Embed systems based ST(STM32), Microchip (Atmel )(PICs,AVR,Atmel ARM) and TI (MSP430) MCPUs and peripheries. For our mobile devices use ESP32 WiFi and nRF51/52xxx BLEs. We realize projects with requirements similar to yours. If we receive more information about your project, we will give you a real cost and time to implement your project. We based in Europe, not customs problems for delivery models and samples for testing Best Valeri T.
$37 AUD in 40 days
4.4 (14 reviews)
6.1
6.1
User Avatar
Hello, I study electronics at Politecnico di Torino and my major is wireless systems design. I can help you with your product design with the following, -Power electronics -Embedded systems -Antenna design, matching circuits, amplifiers, etc. I will try to keep the price a bit low because I need some good comments on my profile. Best regards
$25 AUD in 40 days
4.9 (40 reviews)
5.4
5.4
User Avatar
Hello! I am very interested in your post project. i have rich experience on it. I think this project is very suitable for me and i am sure i can give you good result . I can help you if you'd like looking forward to work with you. thanks regards
$40 AUD in 40 days
4.8 (3 reviews)
4.6
4.6
User Avatar
hi i am interested to do your project. i can satisfy your requirement. it would be my pleasure to work with you.
$30 AUD in 40 days
5.0 (13 reviews)
4.5
4.5
User Avatar
Hello, My name is Andrei, i am a Romanian IOT Developer with a lot of experience in IOT projects and automatics . I can work with all types of Microcontroles programming in C , C++ , Mikro C , CCS C , Atmel Studio , Arduino , gcc . Creating Schematics and PCB in Kicad , Eagle , EasyEDA and Proteus (+simulation). i have an workshop full of parts and the infrastructure to build PCB and test the solution end to end using special tools (Spectrum analyzers , oscilloscope , logic analyzers ) Derivable on the projects : Wiring diagram for prof of concept . Schematic design PCB Design Gerber files for manufacturing MCU code explained every line . As an additional service i can make you a full working prototype and ship to you. Regards, Andrei
$37 AUD in 40 days
4.0 (26 reviews)
5.0
5.0
User Avatar
Hi, I am a new freelancer, but I am an experienced embedded systems engineer. you can learn about my ability by my past design in my portfolio. I also design some IoT project with ESP32, and program some code for it.
$33 AUD in 40 days
5.0 (3 reviews)
3.9
3.9
User Avatar
I am a BEng. Electrical and Electronics Engineer with 5 years of experience in field living in Cyprus. I am specialized in Circuit Analysis, PCB design (EAGLE, Protheus, KiCad, Altium), Microcontrollers ESP8266, ESP32, Arduino, RaspberryPi. I have advanced knowledge on C++, Image Processing, Signal Processing, Neural Network, MATLAB and Simulink.
$33 AUD in 40 days
4.9 (8 reviews)
3.7
3.7
User Avatar
Hi. I am electronics engineer and I have more than five years of designing and development. I have already done the project similar to your project. In my project, there are several equipments at one sight. I have designed a control system that shows the status of these equipments on a central computer by using wireless data transceivers. The central computer can turn the equipment on/off remotely and can see the working conditions of that equipment. For further discussion, please send me a message.
$35 AUD in 30 days
5.0 (1 review)
2.2
2.2
User Avatar
Hello, I have a Master Degree in Electronics. I worked on many projects like Smart home systems in a research team at my workplace. Also, I am an Assistant Professor at University in Sarajevo (Responsible for course: "Analog electronics"). I have a very good expirience with electronics, MCU, creating schematic, creating a PCB layout .... I am ready for all types of cooperation. Best regards
$28 AUD in 40 days
4.7 (2 reviews)
2.5
2.5
User Avatar
13 years experience in PCB design. Using NI Multisim 14.0 and NI Utiliboard 14.0 for all of the Circuit and PCB design.
$32 AUD in 5 days
5.0 (2 reviews)
1.5
1.5
User Avatar
Hello, I'm Gonzalo from Noone. I'm an electronics engineer student. I developed several electronic PCB over the years related to Robotics, Automatism and IoT. I can send you some of my PCB design. I mostly work on Altium Design but I recently started working on Kicad too. I have also sent several design to build in PCBway and JLCPCB so I know the design process. Do you want me to add the programming? No Problem! I worked with STM32, Microchip and ESP8266 microcontrollers, so It's not a problem to work with Atmel. If you also want a full solution, Noone has mechanical engineers to design the case with adapts to the process you use. Don't be afraid to contact me and ask for some of my designs!
$25 AUD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have a good experience like developer of microcontrollers electronics and PCB designer. Additionally, I can develop case or hull for your device.
$33 AUD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I've worked a lot with Atmel processors (now Microchip) and e.g. ESP8266. I can design the circuit, develop the and fabricate the PCB, assemble and send you some prototypes. Currently we are focused on parking and time and attendance systems and have available modules which are close to what you need - e.g. RFID wireless readers, RFID wireless Time and attendance readers, car detector proximity units, wireless IO control boards (WIFI / RS232 / RS485) with digital only inputs and outputs and many other which were designed for specific projects. All our designes are base on ATMEL processors (both legacy 8-bit ones and the newest SAM D10/20 ARM processors (which are cheaper right now), ESP8266 or ESP32 WIFI modules and SIM800H or AI-THINKER A6/A9 modules. Please note that we have developed our in-house SDK's for WIFI and GSM modules, and we do not use the standard AT command based interfaces, thus getting most of those units. As for the IOT part of your project you should specify what you would prefer either using already available IOT cloud infrastructure fro e.g. Microsoft, Google or Amazon or would like to create your own IOT server side. If you have any questions, please do not hesitate to contact me. Best regards, Petko Lazarov
$40 AUD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello I am MS in Electronic Engineering, and I have 17+ years of experience in electronic design. I am professional in CAD software like "KiCad" , "Altium Designer" , "Eagle CAD" , Microcontroller "Atmel" and "Microchip", I did more than 200 projects in microcontroller based devices, and also I did similar projects " IOT" and "BMS" by wireless connectivity. Actually this is my first attempt to get the job as a freelancer, I'm flexible in price and I'm fast and accurate in job. If you need further information please contact me, It's my pleasure to do this job and cooperate with you. sincerely yours. Saheb Amrei
$25 AUD in 48 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Pcb design, pcb layout Relevant Skills and Experience Pcb design Pcb layout Atmel, esp8266 projects
$41 AUD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, I am working In embedded system field for about 10 years. I can get help to develop your PCB design. We can efficiently design PCB upto 10 layers. Give us the chance and we can provide you best services. PM me s that we can discusses more about the project and provide you estimated hours require to develop your design as per need. Warm Regards, Prashant Gupta
$45 AUD in 40 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of AUSTRALIA
Eastwood, Australia
5.0
8
Payment method verified
Member since May 21, 2019

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.