STM32 fuel engine control

Automotive Embedded system design team here with full exposure to STM32 core and we have the development environment. It sounds like you intend to develop an ECU for engine control, and as you rightly said its a big project. Feel free to get in touch to understand the limited scope to be achieved right now and we can help you going forward too. We have expertise in full Auto stack (CAN, LIN, FlexRay, MOST) and worked on many subsystem designs for leading brands. Thanks, Raj

Hi, let me help you finsih this task, This is bellow one hour task. If The task is only to configure basic project with all of your requirement. I have used STM32 extensively since 2011 and using STM32CubeMX since it's early days. SO this is not a big task for me. Just Message me to get started and tell me the scope of this initial project. I have working on STM32 in various projects, from hobbyist to Industrial grade. I'm very confident because this is my daily job. So, Let's get started. Best Regards, Rijal

I am an EE engineer. I have lots of experience designing circuitry in both digital and analog circuits and in programming field worked with Xilinx and Altera FPGA boards writing VHDL and embedded C for NIOS II (field of interest). I have a background in digital design. I also worked with microcontrollers such as MSP430, Arduino, PIC, etc with both Assembly and C language. ABOUT YOUR PROJECT, I have done lots of similar projects before and can handle your project easily. We can discuss it more over chat. Cheers!

Dear Sir, I am an expert with more than 20 years of experience in Firmware development, Programming, Prototyping and PCB Layouts. I have worked alot on STM32 family developing ultra-low power designs with complex computations. I have STM32F7 Dev board. I assure you the best working code for your project. I am online and available for discussion. Regards Talha

Hi, The project is interesting and we would like to support you in this project for the complete firmware development. From the description i can understand it is an automotive project and you have long term plan to establish functionality stage by stage. we are ready to start the activities as the project is beginning. Also we have very good work experience in FW development for automotive ECUs so we will be you best partner in meeting all you project expectations. Chat with us to discuss further and we are Ok with the budget which is convenient for you.

Hi. Nice to meet you on freelancer. I have read your description carefully. I am a freelancer who have a rich experience about embedded system. I have very much interesting of your job, can perfectly complete. If you are interest, please look my portfolio. I can add the other useful features beyond what you think. If you hire me, I will complete this project perfectly at the best possible level. I hope you to invite me. Thanks. Best Regards. Meng.

i am a firamware engineer. i hace rich exp in stm32. i can do your project, please contact me if you want do it

Hi, I have read the requirement for the project. I can assure you, I have developed experience in Electronic Device, which require analog, Microcontroller(8/16/32). PCB designing, Module integration, Firmware, and Debugging. Experience in using Custome Linux board, raspberry pi, Arduino, STM controller, NORDIC Controller, GPU server board. Moreover, I have worked with TI IC for power, Analog measurement. Raspberry Pi GUI Design using QT. I have developed a Medical support equipment device to perform the operation with power backup. Developed the Zigbee network to provide home sensors, actuator data to the server for analysis and control. Designed an NFC based card system to be used in the Metro with different access levels. BLE mesh Indoor navigation system to monitor devices and staff inside the building. Let's discuss the project in detail requirement.

Dear Client, I have been working in the field of MCU for the last 15 years. I have worked with STM 32 cubeMX. I can develop your project in the required settings that you have listed. If you have the Dev kit we can put an eye on that as well. Rest is all clear in the requirements. Please see my profile for past experience. Hope to work with you. Thanks

hello sir. I have just read your job description and your project is really interesting to me. The Items you raised are similar to what I have already done in practice and I think you can do it in a short time if you have a little explanation. I'm an expert having specialization in Electronic Engineering Design. ✔️ Embedded system based on Microcontroller (ATMEGA, AVR, STM8, STM32, MSP430, TMS320, PIC ...) ✔️ A system based on development boards(Arduino, Raspberry PI, Node MCU, Bluechip, Teensy,…) ✔️ Antenna design & Analog circuit/RF communication circuit designing and simulation using Proteus, P-Spice, Tina Pro, ADS, CST, Ansys, HFSS ✔️ Bluetooth, WIFI, zigbee, LoRA ✔️ High-Speed layout using HyperLynx ✔️ PCB layout designing, providing GERBER and BOMs, 3D files using Altium, EAGLE, Kicad, EasyEDA… ✔️ Programming firmware of Microcontroller & C++ ✔️ BMS I think my many design and practical experiences can help you design your project and give you enough satisfaction. I look forward to your response. Best Regards.

ELECTRICAL As an electronic architect, I have been working in PCB structure/design and firmware programming field for 8+ years. Here is a portion of the encounters that I worked back. - Schematic and PCB Format is utilizing Altium Planner, Rhythm, Falcon, etc. ISE/XPS/SDK/Vivado, Altera Quartus, IceCube) - ARM, DSP, MCUs, Arduino experience. - Arm centers: ATSAM, STM32, PIC32, A13, Freescale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board PC: Raspberry Pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE, BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full understanding for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, - C/C++ Coding IDE: keil uvision, Eclipse IDE, Arduino IDE, Avr Studio. - Microprocessor / Microcontrollers: 8051, 8086, ATMEGA, AVR, ATSAM3X8E,STM32,PIC Open Source Micro controllers Platforms: Arduino Uno, Arduino Nano, Arduino Due, STM32 Nucleo board. Experience in managing all phases of electronic product manufacturing and assembly Experience in board-level Testing, Debugging, Test Reports, Test Plans. I am ready to give hardworking, reliability, flexibility & honesty. I can work with minimal supervision, communicate & give updates on the status of my work output. When you employ me, anticipated that I should enable your business to like I 'm developing it as my own. I couldn't imagine anything better than to get notification from you

Hi there, I could help you to do this stm32 project. I'm good at MCU such stm32, electronics and programming. I'm a native Chinese got double degrees' of Master, one of Microsystems Engineering in Germany and one of Mechanical Engineering in China. I could do the project immediately and finish it on time professionally. Best regards, Ting

Hi. I am currently working as an embedded software engineer using stm and freertos. So trust me I can help you with this. Thanks

Hello man, my name is Emir and I'm the new guy here, so I really need some jobs to prove my skills. Until now I have worked as hardware and software engineer and have more than a five years of experience working with C/C++, and my area of expertise are STM microcontrollers, what makes me a good candidate for this, and with your cowork, this will be done. My price is like this, because, this is a little bit huge part for programming an STM. Thanks in advance! Regards, Emir.

I can complete your project i will use mbed os for it. Day by day i will give u a code which you can test and we can move ahead after achieve milestone. Give this project to me i have 7 years of experience in this.

I have more then 3 year experience with STM32 and Embedded software flow. I Can do this in a day without any problem. If you need any thing more to add please let me know.

Hi, Thank you very much for the Job. We would like to take this project. We are a team of people having a experience in embedded systems more than 8+ years, and we had already worked on the realtime projects which you mentioned. We provide best quality deliverables and service even after project completion. We would like to maintain a continuous relationship. Please inbox me. we will give discuss more on the same. thank you.