CAD-Construction/Reverse Flow Water Smoker Grill

The project only in CATIA !!! Among barbecue fans, the method of Low and slow grilling. Smokers are particularly well suited for this their indirect structure particularly well. A Watersmoker differs from the "normal" smokers in that a water basin is that there is a water basin under the grill grate that turns the that closes off the cooking chamber from the firebox closes. Thus a still more evenly heating of the cooking chamber is ensured and it is also temperature is kept stable over a long period of time over a long period of time. A schematic diagram without the waterbed can be seen in the graphic on the right. In the task described here, a smoker of this type is to be smoker is to be designed. But it is to be constructed in such a way that also normal direct grilling, indirect grilling, pizza/cake baking pizza/cake baking in the firebox and wok/dutch oven cooking on the wok/dutch oven cooking on the firebox is possible. The design should be such that the be firmly mounted on a double axle trailer can be mounted. The conversion to other modules should be as simple as possible, since the grill is to be used on the different street festivals should be used. The walls of the firebox and the cooking chamber should be made of 6 mm sheet steel to minimize heat loss. The total construction including the hanging axle should ideally not exceed 2,000 kg, maximum 3,000 kg. The parts of the firebox and the cooking chamber should be chosen so that they can be cut to size on a can be cut to size on a laser machine. The whole is then welded together. There should still be storage space on the hanger for coals and other accessories. Most Smoker are built from tubes, this will not be an option here, since the individual parts are to be lasered and tubes in the required diameters are difficult to get. The cooking chamber should be designed to provide an area of 1800 x 800 mm for direct grilling. For this purpose, the water pan is exchanged for an avalanche stone insert and corresponding burners.