Elastix analog modem jobs

I'm in need of an experienced Analog Circuit Designer to assist with the conceptual design and simulation of a prototype. - The purpose of this project is to develop a prototype, not for research or educational purposes. - I'm currently in the initial stage of prototype development, so we're focusing on conceptual design. - The major components of the analog circuit I need assistance with are transistors and timers. - I have a preliminary reference circuit whose functionality to be replicated with equivalent circuit. Ideal candidates should: - Have prior experience in analog circuit design for prototype development. - Be proficient in using simulation tools. - Have a solid understanding of transistors and timers. - Possess strong problem-solving skills...

...and selection of components for a project. The project involves the creation of a power supply, an analog digital converter, and a relay. Key Responsibilities: - Circuit design: I need help with creating the circuit for the mentioned components. This includes ensuring the circuit is efficient and functions as intended. - Component selection: I'll require assistance in selecting the right components for the circuit. It's crucial to choose components that are of high quality and fit the project's requirements. The ideal candidate for this job should have a solid background in electronic engineering, particularly in circuit design and component selection. Experience with power supplies, analog digital converters, and relays will be highly preferred. This i...

I need a minimal working example of PPPOS in IDF framework v4.4.7. The requeriments are: - Minimal example with SIM800L modem. - Create and configure esp_netif for PPP (create the driver, and task to receive data from modem and send to esp_netif) - Configure the modem via AT commands (PPP conection ATD*99#) - After succesfull connection, make a http request for testing. The most important thing: DO NOT USE esp_modem component. The example must do not use any component, simply the esp_netif API.

I am seeking an experienced LT Spice expert to assist with the design and simulation of a half-bridge circuit to drive an ultrasonic cleaner load, 60W, 39kHz, and 10R impedance. I have an LT spice model that needs to be updated to meet the requirement. The floating side needs to show a square wave and the output to the load needs to be a sinewave. The main requirement is to update the values of the discrete component and use a much better MOSFET to meet the required output of 600V AC, 0.5A, 39kHz Responsibilities: - Improve the LT Spice model for the half-bridge circuit (no rectifier needed), Output is AC and not DC - Conduct detailed simulations to analyze performance - Optimize circuit design based on simulation results The MOSFET part number is SIHP24N80AE-GE3, The PWM controller...

We have diagrams for the cars. We want someone who can create a database of where we can find the analog fuel sensor wire under the dashboard. Project is for 1000 cars and can be long term.

I'm in need of a skilled circuit board designer that can create the and design the Greber file for me, I need to send the files to the manufacturing compony. My project contains few components only. SAM D11C 14-pin chip, 3 LEDS, Battery holder, and a reset switch. The "j2" pads are for programming the chip, Gnd, power, and clock. The 2 antennas traces are connected to analog pins A2 and A4. LEDs are connected to digital pins 24,25,31. the reset button to RST pin of course. For the 4 programming pads. Gnd and Power goes to Gnd and VDD pins in the chip, For the clock, I'm not shire which pins. layout size : 10 cm by 5.398 cm

...seeking an experienced PCB designer to create a functional prototype design of a multilayer PCB primarily composed of analog components. The main aim is to validate the functionality of the design. Key Tasks and Responsibilities: - PCB Design and testing: The prototype's design should allow for rigorous testing of its functionality. - Component selection: Predominantly analog components will be used in the design. - Creating documentation: Comprehensive documentation must be provided detailing the logic behind the selection and arrangement of components. Ideal Experience and Skills: - Previous experience in multilayer PCB projects - Confident and competent working with analog components - Proficiency in PCB design and prototyping software - Strong know...

I need a skilled professional to add (2) Adjustable analog input noise filters to an existing ( Kinco builder) program. The filter intensity needs to be adjustable In the settings screen on the HMI.(Kinco D tools)

...microcontrollers (specifically the ESP32-DEVKITC-32UE). It needs a certain amount of inputs and outputs to begin with, but also minimum 2 outputs with PWM-control or analog 0-5V, as the motorcontroller of choice works with PWM or 0-5V inputs. Also 2 analog inputs 0-5V for 2 kinds of safety edges. Find also the list of peripherals in the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Digital outputs: 6 Analog outputs: 2 Key deliverable: A fully programmed NUCLEO-G491RE STM32 and ESP32-DEVKITC-32UE microcontroller that controls a sli...

I'm in need of a specialist to assist with my Netgear N600 router installation. I am experiencing challenges accessing my router settings and I'm also not able to establish an internet conne...assist with my Netgear N600 router installation. I am experiencing challenges accessing my router settings and I'm also not able to establish an internet connection. To add, every time I attempt to access my router's control panel, I receive a 401 error. I’m not certain if my router is correctly connected to my modem. My internet service is through DSL. Ideal skill and experience: - Expertise in router installation and troubleshooting, preferably Netgear routers - Knowledgeable about modem and DSL connections - Conversant with solving 401 error - Good at e...

I am on the lookout for an experienced C/C++ programmer who can help wi...C/C++ programmer who can help with code adaptation on my current LoRa WAN Helium Network. Based on this project code to send sensor data to Helium (1 for EU868, 1 for US915) but use with esp32 d1 mini and LoRa board connected to lmic_pins: .nss = 4, .rxtx = LMIC_UNUSED_PIN, .rst = 16, .dio = {5, 26, }, ONLY reading 6 ds18b20 temperature sensors and 1 flow sensor, 1 analog In (built in esp32 module) - NO other sensors, NO display - 1 board hast to work in EU868 AND 1 board hast to work in US915 MHz Helium Network - Helium console account and device exists already (including Dev EUI, App EUI, App Key) - Cayenne and TagoIO support is very welcome looking forward to your proposals, regards

I'm in need of an electronics professional who can convert my detailed Arduino connections into a clean, organized schematic diagram. - You will work on the Digital input/output pins, Analog input pins, Power supply connections, literally all connections of my Arduino setup. Essential Skills and Experience: - Knowledge of Arduino - Proficiency in creating schematic diagrams - An eye for detail, and great organizational skills. A schematic will help us represent my setup visually. Our goal is to have a convenient direction for future referencing. In your bid, please include examples of similar work you've done in the past.

I need assistance with setting up my Unifi GPON modem on pfSense. The project involves: - Configuring the pfSense to work with the GPON modem - Ensuring that the Internet connection is stable - Ensuring that the setup is secure It's crucial that the freelancer has: - Experience with Unifi GPON modems - Proficiency in pfSense configuration - A good understanding of network security and stability I have all the necessary access credentials for the modem. A successful outcome would be a working, secure and stable Internet connection through pfSense using the Unifi GPON modem.

...experienced individual to help with an audio breadboard project focused on low frequency tone decoding. The main goal of this project is to trigger an external camera circuit via an analog signal. Key Project Requirements: - Low power stand alone circuit to trigger a camera - Build a mic from parts, i.e. electret, cap, and resistor, that can pick up in the 22Hz range - Amplify the signal with a common amp chip (i.e. LM 386) - Amp needs to work with existing tone decoder circuit that works. Ideal Skill Set: - Proficiency in Low Frequency Signal Processing - Experience in Audio Breadboard Projects - Understanding of Analog Signal Transmission - Comfortable walking me through this online, via video interaction after schematics draw uo This is an interesting and challenging...

I'm in need of a proficient and experienced electrical engineer to design an analog audio circuit for mixing multi-channel signals sourced from line level feeds. This will require expertise in designing robust and low-noise analog audio circuits capable of dealing effectively with multiple audio inputs. Ideal Skills and Experience: • Proficiency in electronic circuit design, specifically analog audio circuits. • Experience with handling multi-channel signals. • Familiarity with line level audio signal processing and mixing. We need an engineer with deep experience in high-end analog circuit design using low noise operational amplifiers. We will provide basic diagrams and objectives. The project involves high quality op amps and line driver...

Please Sign Up or Login to see details.

...network architecture, signal distribution, and redundancy is required. - Establish a walled garden. Proficiency in network security and user segmentation is necessary. - Setup multiple access points. Experience in balancing network traffic and optimizing signal strength across numerous APs is anticipated. - Install dome cameras and PTZ functionality for security purposes. Knowledge in IP cameras, analog cameras, and video recording and storage solutions is essential. - Implement a billing system, enabling customers to pay for access. Prior experience in similar payment gateway or subscription systems will be ideal. - Lastly, include a feature to allow free access in emergency situations. Your ability to integrate multiple systems and maintain a user-friendly operation would be ...

I'm looking for a skilled engineer to create a CompactFlash CFast Digital Audio Player prototype. Qualifications: -must have Distortion Analyzer, frequency sweeps -be able to build a prototype board totally functional -Simulate Analog / Digital signals Regarding hardware Cflash Audio Player using AAC codec Full prototype hardware to be shipped to US Audio player will use CFast card via SATA (not USB) and play audio files using AAC codec DDDAC1794 circuit Dual Dedicated PCM clocks via TCXO 44.1 khz and 48 khz auto select MUSES IC attenuator Steel enclosure (pick something from China but big enough to support batteries) RCA output Remote

...and data analysis. Key Features Required: - Real-time data monitoring capabilities for prompt and effective decision making. - Effective data visualization to understand the complex datasets that IoT devices generate. Devices & Sensors: - A wide range of devices like temperature sensors, motion sensors, and light sensors. - Capability to work with level, pressure, and any other device with an analog output. Data Storage & Retrieval: - System should support time-series data storage to enable historical data analysis. - Seamless database integration for efficient data management. - File storage capabilities to ensure a comprehensive dataset is maintained. Expertise in LoRaWAN based Gateway integration will be highly beneficial to this project, along with extensive kno...

...applications, voltage regulation, and serial communications. Project Requirements: Microcontroller: RP2040 chip to manage all operations. Power Handling: Board must handle input of 24V. Voltage Regulation: Conversion of 24V input to 12V and 5V outputs. MOSFETs: 5 MOSFETs for 24V, 7A control. 4 MOSFETs for 12V, 5A control. Communication: USB Type-C for robust serial communication. Inputs and Outputs: 2 analog inputs. 1 One Wire communication interface. Additional pins for digital input/output as required. Deliverables: Complete PCB design files ready for manufacturing, including gerber files. Schematic capturing and PCB layout. BOM (Bill of Materials) with sourcing options. Documentation for assembly, testing, and troubleshooting. Qualifications: Proven track record with PCB d...

Hello, I'm in need of a professional to create an embedded data acquisition module. This module's primary purpose will be to monitor and collect data. The module will be primarily responsible for collecting analog and digital IO data, with a focus on 0-5V range signals. Ideal skills and experience for the job: - Embedded systems development - Proficiency in collecting and managing analog and digital IO data - Experience with 0-5V range signals - Ability to create a robust, reliable and efficient data acquisition module The successful candidate will be able to deliver a module that can effectively monitor and collect data, and ensure its seamless integration into the system.

I am looking for a skilled developer to port an existing monitoring p...remote control over the devices being monitored. The ideal developer for this project should have: - Strong experience in programming with C#. - Expertise in porting applications between different operating systems. - Prior experience with implementing real-time monitoring, data visualization, and control functionalities. - XEY ! The software is to monitored controllers with 3analog inputs, 2 analog outputs, 10 digital inputs, 10 digital outputs, over simple serial communication, software can link up to 128 controller. If you have the right skills and experience, please don't hesitate to request for the place your bid. Copy of the source code will be provided for potential successful bidders for furthe...

I'm looking for an ESP32 expert to help me with a project that involves utilizing both inputs/outputs and write a code in C language The project requires 7 inputs and 6 outputs. - Inputs : Time Temp sensor probe Soil moisture sensor VPD sensor ...will control the outputs. The successful freelancer will need to provide the following : Full electronic diagram. List of the parts needed other than the inputs sensors and the outputs. Programing code. Ideal skills for this project include, but are not limited to: - Proficiency in programming with the ESP32 platform - Experience in working with digital and analog inputs/outputs - strong understanding in Electric and elect...

...for businesses of all sizes. Our expertise encompasses: • Installation and Commissioning: Proficient in deploying OLT (Optical Line Terminal), Mini OLT, Provider Edge Routers, and Layer 2/3 Aggregation Switches, guaranteeing efficient network operation. • Migration Solutions: We excel in seamlessly transitioning services such as IPVPN, PRI, IPLC, LL, and ILL from legacy networks (SDH, RF, SHDSL Modem) to cutting-edge Next Generation Networks (FTTH GPON), ensuring minimal disruption and maximum efficiency. • Last Mile Connectivity: Specialized in providing last-mile fiber connectivity, whether through aerial or underground routes, ensuring robust connections for Business, Enterprise, and SMB customers to nearby Points of Presence (POPs) through linear or protected p...

...should be able to handle both analog and digital input/output signals. Key requirements include: - Developing a Mitsubishi PLC program for PID control - Integrating both analog and digital input/output signals into the PLC program - Ensuring the program is efficient and effective in controlling the equipment The ideal candidate should have: - Proven experience in developing Mitsubishi PLC programs - Expertise in PID control system - Previous work with both analog and digital signals - Ability to deliver efficient and effective control systems I have a small test job that needs completing The plc Mitsubishi FX3G 14M & HMI E615 Will be controlling the heating and cooling on a small mixer There is analog input (PT100 temp probe) and pressure sensor 4-...

I am looking for a skilled Python developer who specializes in VoIP and PJSIP development. T...Key Features: - Set up SIP trunking for call recording and monitoring, IVR system, and SIP trunking. - Convert my analog phone system to a VoIP system. - Implement Direct Inward Dialing(DID) support for calls between multiple company sites. - Configure the Python bot to manage incoming and outgoing calls. Bot Functionality: - Answer and route incoming calls to appropriate destinations. - Initiate outgoing calls based on specific triggers or events. - Handle real-time call transfers and call forwarding. Skills Required: - Proficient in VoIP and PJSIP development using Asterisk. - Strong Python programming skills. - Experience with SIP trunking and DID. - Familiarity with analog to ...

I am looking for a skilled Python developer who specializes in VoIP and PJSIP development. T...Key Features: - Set up SIP trunking for call recording and monitoring, IVR system, and SIP trunking. - Convert my analog phone system to a VoIP system. - Implement Direct Inward Dialing(DID) support for calls between multiple company sites. - Configure the Python bot to manage incoming and outgoing calls. Bot Functionality: - Answer and route incoming calls to appropriate destinations. - Initiate outgoing calls based on specific triggers or events. - Handle real-time call transfers and call forwarding. Skills Required: - Proficient in VoIP and PJSIP development using Asterisk. - Strong Python programming skills. - Experience with SIP trunking and DID. - Familiarity with analog to ...

I need a profess...the TI LAUNCHXL-F280049C. 2. Programming: The program needs to be written in C. 3. Functionality: The program should be able to accept an integer input that represents a torque value. This input would then be used to adjust the speed of a small motor controlled by the DRV10970. 4. Signal Control: I'm unsure of the type of signal that should be used to control the motor speed(PWM, Digital, Analog). Therefore, I am open to suggestions on this aspect. It would be great if you can provide your expert advice here. 5. I would also appreciate help/schamtics on how to connect the two boards (DRV10970EVM and LAUNCHXL-F280049C) so that i can run the program Looking forward to work with an individual who is proficient in C and has strong knowledge in using mi...

I require an expert in Arduino Esp32 to develop the following functionalities: - Implement wireless communication capabilities on the Arduino system. - Integrate both analog sensor input and digital output control on the same Esp32. - Subsequently, the system must be designed to read and store 4 diverse coin denominations. Storage and Processing of Data: - Experience working with Arduino internal non-volatile memory is crucial, as this is the preferred method of storing denomination data. Key Skills: - Arduino ESP32 proficiency - Understanding of wireless communication - Expertise in internal non-volatile memory systems - Ability in sensor input and digital output control - Experience in handling multiple currency denominations This is quite a specialized project, and a success...

I'm looking for a skilled engineer to create a CompactFlash CFast Digital Audio Player prototype. Specific features and requirements include: Qualifications: -must have Distortion Analyzer, frequency sweeps -be able to build a prototype board totally functional -Simulate Analog / Digital signals Regarding hardware Cflash Audio Player using AAC codec Full prototype hardware to be shipped to US Audio player will use CompactFlash and play audio files using AAC codec DAC is PCM1794 or WM8742 in non-upsampling mode Dual PCM clocks 44.1 khz and 48 khz auto select MUSES IC attenuator Steel enclosure (pick something from China but big enough to support batteries) RCA output Remote This project requires deep familiarity with audio technology, battery operations, and prototyping. I...

Please Sign Up or Login to see details.

I need a Python program developed that can establish and manage a connection with a National Instruments (NI) DAQ USB-6008 for the following tasks: - Analog Input: I need to feed real-time analog data into the program. This part of the program will be responsible for reading the analog input from the DAQ. - Analog Output: The program should also have the capability to send analog signals to external devices. This will be used to control physical devices. - Digital Input/Output: I will also need the program to manage digital signals. This will include reading digital inputs and sending digital outputs. - Want to connect 8 piezoelectric sensors to the DAQ and monitor all the signals in real-time on a PC. The program will need to manage all these tasks i...

...control 2 stepper motors and two DRV8833 modules to control 4 DC motors, there is also a 1W LED controlled by one of mosfets. The motor modules and mosfets must be equipped with jumpers to select the 5 or 12 volt power supply. Not all mosfets need to be controlled by pwm pins. All digital inputs must include a 10k ohm resistor, but with the possibility of excluding it. There are also digital and analog inputs, some modules and pins for I2C. I attach some images, they are only indicative of the position of the various connectors. In the first image, the Arduino board connects over to PCB A and it is upside down. In the second image, PCB A is inserted into the Arduino, it remains behind the PCB and perhaps manages to use a little more space. The third image is the legend of the var...

...Bluetooth Low Energy (BLE) and Global Navigation Satellite System (GNSS). These components are vital for the functionality of this advanced wearable device for pets. Deliverables: --Enable the device to continue to be used if in range of Wi-Fi/BLE and not LTE -To transition workflow away from one cloud broker to another -Refactor GNSS calls on the device -Retrieve RSSI/RSRP information from cell modem of the device Ideal Skills: - Proficiency in IoT applications, particularly regarding network and satellite technologies. - Proficiency in working with cellular, Wifi, and BLE wireless communication technologies -Familiarity with embedded C programming -Comfort with Git source control The ultimate objective is a seamless user experience underpinned by robust connectivity an...

...a specialized microcontroller for an HVAC application. The microcontroller requires specific features and functionalities. Key Requirements: - Temperature Control: The microcontroller should be able to regulate temperature within a range of -50 to 100 degrees Celsius. - Timer Function: An essential feature, the microcontroller needs to support timer functions. - Inputs and Outputs: Integrate 3 Analog, 5 Digital inputs, and 8 digital outputs for a comprehensive system. - Should have integrated IoT for viewing data online. Ideal candidates should have: - Previous experience in designing microcontrollers. - Proficiency in programming and testing microcontrollers. - Knowledge of sensor integration and communication protocols. While the project demands expertise in microcontroller ...

I'm in need of a comprehensive warehouse inventory replenishment tracking system for our Fastener drawer at Home Depot. The system should have a focus on reporting and analytics, real-time bin shrink, and work with an electronic keypad and analog/digital interface. Key Features: - **Reporting and Analytics:** The system should provide insightful reports on inventory levels and trends. This will help us make data-driven decisions. - **Real-Time Bin Shrink:** I need to know if the quantity of items in the bin matches the recorded amount. - **Interface:** A mobile app interface will be ideal, making it easy for staff to work on the go. Inventory Tracking: - The system should involve manual entry for inventory tracking. The system should be user-friendly and easy to use ...

...to be capable of supporting PDF files, though text files or images are acceptable alternatives. - The projector should be able to display content like a standard projector, including the ability to project onto walls. The projected image can be smaller than typical; alternatively, a design similar to children's toys that use a magnifier for viewing could also work. - I would prefer an entirely analog design for the mini projector, eliminating the need for a battery. However, if a battery is necessary, it should have a long lifespan, similar to that of older Nokia phones, lasting 3-4 weeks. - All components must be of high quality and the entire device should be waterproof. - Optionally, a touchscreen might be integrated on the spherical silicone casing to allow document navi...

...which can be done with component selection or circuit alterations. - The purpose is a prototype development, which means you'll be instrumental in bringing my concept to life and preparing it for eventual manufacturing. - The PCB design will incorporate analog components, so expertise in working with these components is a must. You should be comfortable explaining and justifying your design choices based on this requirement. Skills and Experience: - Proven experience in PCB design and schematic capture - Strong understanding of Analog components and how to effectively incorporate them into designs - Familiarity with prototype development - Detail-oriented and high precision working style. - Power managment and componant knowledge. Ideal candidates will have a p...

I'm seeking a capable programmer with expertise in using C and Atmel Studio and a good understandi...a capable programmer with expertise in using C and Atmel Studio and a good understanding of Atmel microprocessors. The project involves developing a Simple Program capable of: - Reading analog sensor values - Reading digital input signals - Controlling digital output signals Using a combination of analog and digital inputs and outputs is key to the project, so demonstrated experience in this area is required. Prior knowledge of Arduino would also be beneficial. The right freelancer should be proficient in microprocessors, specifically with Atmel typed ones, and comfortable using both digital and analog inputs and outputs. Familiarity with wireless communication...

I am doing a gut renovation of a 4-story townhouse in Washington, DC and I need help designing the internet connectivity throughout the house. I have some ideas of what the network might look like, but I want the guidance of an expert to make sure I don't make any mistakes. My thought is to have the electrician run ethernet cables from each floor to a central location where my modem will be located so I have a hardwired connection on each floor of the house. I would use those ethernet outlets to connect TVs that would stream content from the internet, and I'm also thinking of having a wireless access point on each floor to ensure strong wireless access throughout the house. I need help figuring out the exact equipment I should buy, and to confirm that my wiring plan wi...

great packaging work with printers analog

I'm seeking a professional with expert knowledge in precision analog design. Goal of the project is a small prototype board to measure K type thermocouple elements - with two different approaches. Additionaly obvisouly a MCU will take place - as well as RS485 communication. Absolut main aspect is an accurate (in sense of stability, low noise and absolute value representation) K thermocouple element measurement. Two approaches are forseen - using the high precision MAX31856 as well as the AD8495 in conjunction with a 20-bit SAR and 24-bit SigDelt ADC. Apart from the ADC proposition the project comprisis of a full circuit and PCB creation. Additionaly also the needed firmware for the respective communication (over SPI) shall be properly implemented (well structured and with re...

...robotic arm to make the then when done, trigger and let our software take over from our software finishes its job it will trigger back to the robotic arm to do edge part. I also need to add that the numbers that will be displayed are digital. But there is no way to read them over the bus. They will have to be read back into a file from a photo optic. Pick up basically as an analog to digital. Bro. I'm seeking an expert in robotics programming to build a program that can automate simple, repetitive tasks on an assembly line. Key Requirements: - The primary goal of this project is to automate our assembly line operations. The program should be able to handle simple, repetitive tasks currently being performed manually. - The tasks are very straightforward, so the level

I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application.

I'm in search of a skilled electronic engineer who can design and build a specialized electronic circuit for me. The purpose of this circuit is to measure pressure using a flat piezo element, read the analog data, and then transmit it via Bluetooth to an Android smartphone. Key Points: - The circuit needs to handle a range of 0-100 PSI. It should accurately measure the pressure and convert it into a readable format for the smartphone. - The circuit should be compact and user-friendly, allowing easy pairing and operation with an Android smartphone. Ideal Candidate: - Strong background in electronic engineering, particularly in designing circuits for sensor data processing. - Prior experience in working with piezo elements and pressure transducers will be a significant advan...

I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application. I have 8 year experience on Arduino and know all principles of it. I’m using Atmega chip instead of Arduino board as a platform...

Seeking an experienced Adobe Illustrator artist proficient in creating intricate and detailed black & white designs. The project will include: - Replicating an original analog meter face from the 80's. - The reproduced design should be under 5 inches. - Highlighting and focusing on specific symbols and design elements from the initial artwork. The style needed is a blend of nostalgia and precision. Good understanding of vintage aesthetics combined with proficiency in Adobe Illustrator is desirable. Your in-depth understanding of black & white design elements and their impact is necessary in this project.

As a tech enthusiast working on moderate complexity circuits, I need a proficient designer to assist me. I have analog and digital types of circuits at hand, which require exceptional skills and experience in circuit design. The ideal candidate should: - Have considerable knowledge and practice in designing analog and digital circuits of moderate complexity. - Be familiar with EasyEDA software, as I prefer working more smoothly with this platform. - Deliver accurate, efficient, and innovative designs that cater to the project needs. Your role primarily involves providing high-grade designs, generating new ideas, and enhancing the functionality and efficiency of our existing circuits. An understanding of technical specifications and a knack for solving circuit-based challen...

I'm looking for a skilled professional to assist with an embedded software pr...skilled professional to assist with an embedded software project that involves working with microcontrollers. Requirements: RTU shall be connected to following ETHERNET TCP IP/ MODBUS TCP IP/ SERIAL/ DNP3.0 SERIAL/ DNP 3.0 IP, etc. The ports Profibus and Profinet used protocol converter RTU connections GPRS link over DNP3 /Mod Bus TCP/IP /GSM GPRS servers. The RTU having functionalities analog input, analog output, digital input, digital output. RTU communication protocol: DNP3 level 4 & MQTT Both RTU Serial Comm Protocol: DNP3 level 4 Master/slave and peer-to-peer, Slave, Modbus Master/Slave DNP3 level 4 in TCP Master/Slave, UDP Master/Slave and peer-to-peer, Modbus TCP Server/Client,...

... - Implementing a reference for stable measurements. - Ensure proper calibration and data conversion for accurate measurements. - After correct values are obtained in serial monitor, in the next stage data will be sent to a computer. - Write clear and well-commented code for maintainability and further development. Our Requirements: - Proven experience in Arduino coding and familiarity with analog and digital electronics concepts. - Ability to work effectively from a circuit diagram and translate it into functional code. - Understanding of electrochemical principles (a plus). - Constant communication to discuss project details and address questions. Benefits: - Competitive freelance rate for the project. - Potential for ongoing collaboration on multiple future projects (dep...