ASIC FPGA VHDL jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,000 ASIC FPGA VHDL jobs found, pricing in USD

    I am in need of an expert with FPGA Verilog/VHDL experience in Xilinx. The project requires advanced programming skills in Verilog/VHDL and must be completed within a week. You should have a Xilinx board to work on this project. Tasks: - Programming in Verilog/VHDL Ideal Skills and Experience: - Expertise in FPGA Verilog/VHDL - Strong knowledge of Xilinx - Advanced programming skills in Verilog/VHDL Deadline: - Within a week

    $171 (Avg Bid)
    $171 Avg Bid
    11 bids

    I am looking for experts in Xilinx VHDL to be a part of my team and work with me on various projects. I need dedicated experts who can work in tight deadlines too I would encourage new freelancers too to place bid and have a communication with me

    $194 (Avg Bid)
    $194 Avg Bid
    5 bids

    I am looking for experts in Xilinx VHDL to be a part of my team and work with me on various projects. I need dedicated experts who can work in tight deadlines too I would encourage new freelancers too to place bid and have a communication with me

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    8 bids

    I am looking for a freelancer who can develop a VHDL test pattern generator with the following requirements: Configurable output order configurable pattern configurable pixel per clock test in simulation only

    $189 (Avg Bid)
    $189 Avg Bid
    13 bids

    We need asic engineer if you to work with us then mail us on [Removed by Freelancer.com Admin]

    $61200 (Avg Bid)
    $61200 Avg Bid
    2 bids

    hi, i'm searching for an experienced in Matlab and VHDL i have a code written in matlab and it's calling some functions that also written in matlab and i want to convert the code into VHDL if you can convert it please bid on this project

    $7 / hr (Avg Bid)
    $7 / hr Avg Bid
    13 bids

    I have an FPGA carrier board and I am interested in someone to review it and make any suggestions for improvement. This is a carrier board for an Alinx FPGA core board. It is basically a version of Alinx's carrier board with all the parts I don't need removed. The board has 10G Ethernet via an SFP, Gigabit copper Ethernet, USB 2.0, and a few minor things. I developed this board because I need to generate the SFP clock differently, and the off-the-shelf board cannot accommodate the change. I stuck closely to Alinx's design for maximum compatibility with our current usage of the Alinx board, so this request concerns not the parts but the PCB layout. It is a 4-layer design in KiCad. I tried to take care with impedance and layout, but a more experience set of eyes...

    $145 (Avg Bid)
    $145 Avg Bid
    14 bids

    Hello I have a project written in Matlab, I need to convert this code to VHDL by using Vivado.

    $149 (Avg Bid)
    $149 Avg Bid
    24 bids

    I am looking for an experienced crypto mining tech to help me with a project for mining Bitcoin. I have specific hardware requirements, which include ASIC Miners. Therefore, I need someone experienced in working with this type of equipment and familiar with the best practices for maximizing the mining potential of such hardware. The successful applicant should be able to demonstrate a deep understanding of crypto mining techniques, be able to manage specialized mining operations, and possess the necessary skill to drive the project to successful completion. My goals are to maximize the hardware potential, minimize the costs associated with the mining process, and optimize the returns. In addition, I am open to hearing advice and suggestions from the successful candidate on how we c...

    $25 - $50 / hr
    Sealed
    $25 - $50 / hr
    5 bids

    I am seeking an experienced professional to help with a project involving Xilinx FPGA development. I am using the Xilinx Zynq-7000 board and the main function of the board in my project is to process data. I need help with both hardware design and software development for this project. The qualified candidate should have significant expertise in hardware design and software development for FPGA systems. Excellent knowledge of C/C++ and VHDL for FPGA design/programming is also necessary. The candidate should be able to understand and utilize various types of FPGA peripherals and interfaces including, but not limited to, SPI, I2C, UART and Ethernet. Working knowledge of the Zynq-7000 series FPGA board and its associated software/tools (e.g. the Xilin...

    $15901 (Avg Bid)
    $15901 Avg Bid
    13 bids

    I need a highly intelligent respectful person to take on a DIFFICULT Legal research matter from as it is our Government website. ... how to raise monies here in...706,707,708 see here Your task is to fully research this section Please read the sections and only apply if you have the intellect to comprehend these difficult sections for us. We will pay a nice Bonus if you want to be challenged by this task as its not an easy job.

    $34 (Avg Bid)
    $34 Avg Bid
    28 bids

    I want to implement the Ethernet connection between FPGA board to PC. The deliverables are as follows - Verilog code to run on a Spartan 6 Board - (xc6slx100) - Simulation time diagrams (more details will be given to the winner) - The code should be able to transmit and receive data at 1000mbs.

    $371 (Avg Bid)
    $371 Avg Bid
    15 bids

    I am looking for a skilled freelancer who can apply clock gating techniques to my ASIC design. The project requirements are as follows: Intended Application: - The ASIC design will be used for encryption purposes. Ideal Skills and Experience: - Strong knowledge and experience in ASIC design and clock gating techniques. - Proficiency in working with clock gating tools and methodologies. - Familiarity with low power design techniques and power optimization. - Experience in encryption or AES

    $53 (Avg Bid)
    $53 Avg Bid
    2 bids

    - A report of minimum 6 double-column pages for the case study It should follow the IEEE Template (). - Select a research problem in FPGA - Do a literature review. - Perform implementation of at least one paper (if any) - Discuss the available solutions to the problem - Propose a novel solution to the problem (if any)

    $63 (Avg Bid)
    $63 Avg Bid
    8 bids

    I am looking for a freelancer who has extensive knowledge of ASIC chips and their architecture, specifically in the context of firewalls. Main Goal: The main goal of this project is to understand the architecture of ASIC chips in firewalls. Timeline: The preferred timeline for completing this project is today. Skills and Experience: Ideal candidates for this project should have: - Extensive knowledge of ASIC chips and their architecture - Experience in working with firewalls

    $18 (Avg Bid)
    $18 Avg Bid
    10 bids

    I am looking for an experienced VHDL programmer to help with a complex project. The timeline for this project is within a week, so it will require an experienced programmer who is able to work very quickly. I have detailed requirements that need to be satisfied, and I will be expecting a high-quality result. The project is an advanced level project, so I need someone who is comfortable working with complex VHDL code. If you think you can complete this project in the timeline given, please message me!

    $24 (Avg Bid)
    $24 Avg Bid
    7 bids

    Project Description: Can you help me with a mini spectrum analyzer using FPGA the results will be on a pc screen with GUI that the user can put markers on and change the resolution, to make a spectrum analyzer with FFT algorithm on FPGA Using UI the user can control the span a put markers. The user will be able to change parameters in a user interface. The ADC is the sampling. The FPGA is going to calculate the FFT. The all idea is to mini spectrum analyzer (the measurement device). Block chain 1. ADC for sampling 2. FPGA to calculate the FFT and sent it to the pc display

    $160 (Avg Bid)
    $160 Avg Bid
    7 bids

    Project Title: FPGA Xilinx Spartan 7 for Digital Signal Processing Application Skills and Experience: - Proficiency in FPGA development using Xilinx Spartan 7 - Strong background in digital signal processing - Experience in writing HDL code from scratch - Familiarity with FPGA design tools and methodologies Project Description: We are looking for a skilled FPGA developer with expertise in Xilinx Spartan 7 to assist us with a digital signal processing project. The main application of the FPGA will be digital signal processing, specifically in the area of [insert specific application]. Requirements: - Develop FPGA design using Xilinx Spartan 7 for digital signal processing application - Write HDL code from scratch based on project requirements - I...

    $1277 (Avg Bid)
    $1277 Avg Bid
    13 bids

    I am looking for a freelancer to help with hardware verification. Specifically, I would like someone to verify a VHDL model od SHA3 in SystemVerilog using the UVM (Universal Verification Methodology). This project will also require executing fewer than 10 verification test cases. I have semi-built UVM template to send.

    $44 (Avg Bid)
    $44 Avg Bid
    7 bids

    My experience with deploying Caffe networks on FPGA boards is intermediate. I have prior experience with the Lattice Radiant software so I am ready to use it for this project. My specific task or outcome I want to achieve with this deployment is Image Classification using the ICE40UP5K FPGA with the iCE40 UltraPlus Breakout Board and Lattice Radiant software.

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    3 bids

    My experience with deploying Caffe networks on FPGA boards is intermediate. I have prior experience with the Lattice Radiant software so I am ready to use it for this project. My specific task or outcome I want to achieve with this deployment is Image Classification using the ICE40UP5K FPGA with the iCE40 UltraPlus Breakout Board and Lattice Radiant software. Details: 1, I already built a caffe network, just need to deploy it 2, the input of the caffe network is supposed to be an image but right now the input of the caffe network are 32x32 matrix and output will be 1 or 0. I want to test that with deploy the model on ICE40UP5K 3, I will provide the network file, and the final result will be a project file and can use my caffe network, have hardcode a 32x32 matrix and output ...

    $177 (Avg Bid)
    $177 Avg Bid
    4 bids

    My project is about FPGA programming for control systems. I'm using the Altera Cyclone V board and the preferred programming language is Verilog. This project requires someone with experience in FPGA programming and the design of embedded systems. The programmer should be able to develop design flows for FPGA devices, debug them and modify existing designs for better performance. The knowledge of hardware description languages such as VHDL and Verilog is crucial, as they will be used for implementation and testing of the designs. Additionally, some knowledge of microcontrollers and communication protocols will be required. The right person for this job should have strong problem-solving skills, excellent coding and debugging capabilities, and a deep underst...

    $167 (Avg Bid)
    $167 Avg Bid
    22 bids

    I am in need of an experienced and professional digital circuit designer to undertake a project involving Verilog coding, RTL verification, and FPGA implementation. Specifically, I need the Verilog coding to be at the intermediate level and it must meet specific requirements. The scope of this project is just Verilog coding running though Xilinx Vivado IDE. The successful applicant must have a good understanding of design flows to be implemented in Verilog, including synthesis and simulation techniques, as well as a thorough knowledge of all aspects of Verilog coding and digital circuit design. Experience with RTL verification and FPGA implementation will also be beneficial for this role. Ultimately, I am seeking an individual who is able to accurately analyze the specificati...

    $107 (Avg Bid)
    $107 Avg Bid
    18 bids

    Project Title: Altera DE0 Board Programming Assistance Description: I am seeking a freelancer who can provide programming assistance for my Altera DE0 board project. I require expertise in VHDL programming language and the ability to modify existing code as well as start from scratch. Skills and Experience: The ideal candidate for this project should have: - Proficiency in VHDL programming language - Experience with Altera DE0 board - Strong troubleshooting and debugging skills - Knowledge of hardware design consultation Specific requirements: - Provide programming assistance for the Altera DE0 board - Modify existing code and develop new code from scratch - Troubleshoot and debug any issues that arise during the programming process - Provide hardware design consultation a...

    $36 (Avg Bid)
    $36 Avg Bid
    8 bids

    I am looking for a skilled programmer to work on the video processing project involving the GS2962 and GS2961 ICs. Programming Language: - Proficiency in VHDL programming language is required for the IC programming. Functionality: - The primary function of the programmed ICs should be video processing. Hardware Compatibility: - The IC programming should be compatible with specific hardware that I have specified. Ideal Skills and Experience: - Strong knowledge and experience in programming with VHDL language. - Expertise in video processing and working with ICs. - Familiarity with GS2962 and GS2961 ICs. - Ability to ensure compatibility with specified hardware. Please provide examples of previous projects related to video processing and IC programming when submittin...

    $318 (Avg Bid)
    $318 Avg Bid
    4 bids

    I am looking for someone to help me with the installation and setup of the Ironfish miner on my Windows operating system. I will use FPGA or GPU solution of teamredminer. As a beginner in cryptocurrency mining, I am in need of assistance from someone with experience in this field. Some of the skills and experience ideal for this job include: - Proficiency in installing and setting up mining software - Knowledge of the Ironfish miner and its specific requirements - Understanding of Windows operating system and its compatibility with mining software - Patience and ability to explain the process to a beginner in a clear and concise manner - Troubleshooting and debugging skills to address any issues that may arise during the installation and setup process If you have previous experien...

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    9 bids

    I need someone to help boot petalinux

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    6 bids

    We are searching for support on debug test and addition of a couple of features to a project we developed last year The board is a synchronous (with GPS PPS signal) acquisition from 7 ADCs. The clock is generated internally from a PLL, locked to the PPS. Lattice ECP5 on a custom board There are 2 external interfaces to an IMx6 SPIM: Spi Slave, the Master is a Imx6 processor, which is used to write and read internal registers and ADC’s registers. Details on the protocol in the FDD SPIS: Si Master, the data acquired from the ADCs are packed and sent to the external IMx6 Modifications ADD MEMS Accelerometer, ADXL355 channel modify the data stream, adding 8th channel. A review of protocol might be needed ADD Registers to control DAC and discretes ADD DAC. We can share a DDS to generate ...

    $452 (Avg Bid)
    $452 Avg Bid
    19 bids

    I am looking for a skilled ARM embedded freelancer to assist with ...of the Embedded System: - Personal project Hardware and Software Requirements: - I have specific requirements Ideal Skills and Experience: • Good grasp of fundamentals in Electronics Engineering, • Knowledge of digital electronics, VLSI, microprocessor architecture is a plus • Interest and experience in digital design and verification • Good understanding of Assembly-level programming, Verilog/VHDL • Proficient in C/C++, and scripting languages - Strong knowledge and experience in ARM microcontroller programming - Proficiency in real-time operating system (RTOS) development - Expertise in embedded system design and implementation - Familiarity with the specific hardware and software req...

    $28 (Avg Bid)
    $28 Avg Bid
    8 bids

    We are currently running 4 Asic miners and i want to envelope a way for users to log onto the app and essentially help with the pricing of mining by being able to but around 1/4th of each miners ability to aid in the development of more machines so that i can help cover the costs of the mining operation growning.

    $1285 (Avg Bid)
    $1285 Avg Bid
    24 bids

    I am looking for a skilled VS code extension developer who can create a language support extension for VHDL/Tcl. The ideal candidate should have experience in developing VS code extensions and have a strong understanding of external tasks. Requirements: - Proficiency in developing VS code extensions - Familiarity with the VS code extension development process - Ability to create a language support extension We have a language support extension already, that support VHDL and Tcl programming language. we need support to add tasks to the extension, to call external scripts. more details in following communications

    $115 (Avg Bid)
    $115 Avg Bid
    12 bids

    ...connection via 10/100 M port 4) Audio processing to filter unnecessary noise from Microphone 5) IPv4 / IPv6 based routing for minimum 9 nodes (communication between atleast 9 C3/S3 boards via ethernet/wifi).Important one- will tell in detail via chat. 6) Getting the chip into low power consumption mode. Note: The ESP32-S3/C3 will be interfaced to an FPGA via SDIO interface. So,the software should be easy to read and use. So,that the FPGA guy can interface the chipset with less trouble. Library for the GNSS/other modules may not be freelancer should take care of them. Datasheet and other technical details will be provided. More details will be given via chat. Circuit design etc.. Please note that all these can't be achieved via Arduino. So,I am looking for s...

    $170 (Avg Bid)
    $170 Avg Bid
    5 bids

    I am looking for an experienced Verilog FPGA specialist to develop a reliable and efficient code for me. I do not have a specific functionality in mind, but I do need the code to have a clock frequency of less than 100MHz and fewer than 10 inputs and outputs. I would also like to ensure that the code is reliable and bug-free. If you have the expertise and skill set to deliver a high-quality solution, please contact me. I look forward to hearing from you!

    $27 / hr (Avg Bid)
    NDA
    $27 / hr Avg Bid
    19 bids

    I am looking for an experienced FPGA developer to help me with a project. The desired application for this project is Embedded Systems and the software preference is Telecom, which I need to be completed within 1 month. The expertise of the developer should be suitable for this type of development, and must have experience with Xilinx Vivado, Intel Quartus or Lattice Diamond. Time is of the essence, so I’m looking for someone who can hit the ground running and begin the project as soon as possible. If you feel you have the necessary skills and experience for this project, I look forward to hearing from you.

    $39 / hr (Avg Bid)
    $39 / hr Avg Bid
    20 bids

    ...experience and knowledge in FPGA to interface RF AFE chip from analogue device(exact part number via chat) Desired FPGA- xilinx Zynq/ equivalent series, Cyclone/equivalent from altera. The FPGA will be interfaced with the AFE and will act as an DSP. Apart from the AFE the FPGA is expected t be interfaced with: 1) Display module 2) Keypad 3) Memory 4) Microphone 5) ESP32C3 and GNSS module. Additional MCU/processor can be added to reduce the burden on FPGA. It can be decided after discussing. The FPGA will perform the DSP task and will be used to transmit RF waveforms. It will be used to perform frequency hopping and encryption (AES-256/SHA) task for the waveform. More detailed information via chat. Eligibility: The freelancer must ha...

    $644 (Avg Bid)
    $644 Avg Bid
    6 bids

    Hello, I am looking for experienced person who has experience in high speed and RF PCB design to choose the required components and design a PCB for an SDR with specifications as below : RF specs: Frequency range: 20MHz to 580MHz Channel bandwidth: 25KHz to 5MHz Hoppinng feature: Yes Modulation: AM, FM, 4FSK Data rate: Atleast 2 Mbps The SDR should have an onboard FPGA/SOC for encryption and encoding purpose and for use as DSP. Other interfaces in the PCB: 1).Display 2).Dail/Keypad (commercially available ones) 3) other necessary interface via chat. Additional and accurate information will be be revealed to qualified users via chat. Requirement: Only the PCB needs to be designed and freelancer should find the required components (COTS components only) and assist

    $464 (Avg Bid)
    $464 Avg Bid
    12 bids

    perform a side channel attack specifically a template attack on a target device using a chip whisperer tool. You will be attacking a low powered FPGA that uses an encryption scheme. The task involves, programming a FPGA, performing a template attack, and recording all results and steps to do so.

    $1206 (Avg Bid)
    $1206 Avg Bid
    26 bids

    Task description. we have a fork of a VScode extension which we customized (modifying snippets and some minor modification) This should be extended, we want to create an extension to be used internally to the company by every FPGA designer the extension shall support VHDL and Tcl (snippets and language syntaxes files are there already) Add Tcl language support (, ) but we would like to add the capability to call external Tcl scripts, right clicking on a vhd file in the Explorer Tab

    $47 (Avg Bid)
    $47 Avg Bid
    2 bids

    I am looking to use FPGA and a neural network to complete a financial forecasting application. The complexity level of the neural network is intermediate and I will provide specific details about the hardware and software preferences for the project. Accelerate

    $126 (Avg Bid)
    $126 Avg Bid
    21 bids

    I am looking for a skilled VS code extension developer who can create a language support extension for VHDL/Tcl. The ideal candidate should have experience in developing VS code extensions and have a strong understanding of external tasks. Requirements: - Proficiency in developing VS code extensions - Familiarity with the VS code extension development process - Ability to create a language support extension We have a language support extension already, that support VHDL and Tcl programming language. we need support to add tasks to the extension, to call external scripts. more details in following communications

    $221 (Avg Bid)
    $221 Avg Bid
    17 bids

    We have a custom board with some perhiperals. We designed a FW, and verify the interface with some ADC. We need to add a couple of small functionalities (an accelerometer via SPI and a DAC). this will requires minor modifications to 2 SPI, used to interface with an external microprocessor. Test and debug is also needed

    $529 (Avg Bid)
    $529 Avg Bid
    18 bids

    Linux embedded SW developer, iMX6/Zynq we are looking for a skilled Linux embedded software developer to work on a project involving the iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dts and rootfs, and we already started testing of he Master SPI (we will share code). SPI Slave has to be developed from scratch OS built with Yocto

    $577 (Avg Bid)
    $577 Avg Bid
    21 bids

    I am looking for a Hardware Architect/Designer with experience in designing complex FPGA boards. Requirements: - Experience in designing boards for CPUs, FPGAs and uC - Experience in process-driven development environments - Experience in requirements engineering - Knowledge of companion devices integration - Familiarity with connecting cameras to FPGA boards Skills and experience: - Hardware requirements engineering (preferrably with Polarion or DOORS) - Proficiency in FPGA board design and development - Circuit design and layout (with Altium Designer) - Strong understanding of companion devices integration - Experience in designing FPGA boards with camera (3D-SDI) and display (HDMI) connectivity - Knowledge of further interfaces like CAN, UART etc. The prod...

    $76 / hr (Avg Bid)
    Featured Urgent NDA
    $76 / hr Avg Bid
    5 bids

    Project Description: Build Pulp Snitch Cluster for Xilinx FPGA Board I am looking for a skilled and experienced developer to build a Pulp Snitch Cluster for my Xilinx FPGA Board. The ideal candidate should have expertise in System Verilog programming and configuration. Requirements: - Create a project, so Pulp Snitch Cluster can be built for Xilinx FPGA Board (Kria 260) using command line - Strong knowledge and experience in System Verilog programming and configuration Skills and Experience: - Expertise in System Verilog programming and configuration - Familiarity with Xilinx FPGA Boards - Familiarity with Xilinx tools (Vivado, etc..)

    $171 (Avg Bid)
    $171 Avg Bid
    6 bids

    Our Company, Sanion, is located in Incheon, South Korea. We are leading Korean company which m...long term. We are specifically looking for any engineer who has some experiences on embedded Linux, FPGA or embedded programming to work on the firmware of our embedded device. If you are interested, please contact us to discuss about the offer in details. Skills and Experience: - Proficiency in embedded system development - Strong knowledge of programming languages such as C and C++ - Experience with hardware and software integration - Familiarity with microcontrollers and microprocessors - Understanding of electronics and circuit design - Ability to work independently and meet project deadlines - Willingness to relocate to Korea for full-time employment - Knowledge in Embedded Linu...

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    12 bids

    Overview: We are seeking an experienced Senior Scientist or Engineer with expertise in SPAD (Single-Photon Avalanche Diode) Pixel Design to join. The successful candidate will be responsible for leading the development of cutting-edge SPAD pixels and related ASIC chips for a variety of applications. Hiring regions: Global Working hours: 9:00-12:00 am, 13:30-18:00 pm, Monday to Friday, Beijing time. Open to adjusting for candidates in different time zone. Responsibilities: 1. Develop the TCAD simulation device models to guide the design of SPAD pixels. 2. Lead the design, fabrication, and characterization of SPAD pixels for high performance and various requirements. 3. Collaborate with cross-functional internal teams and externals, including chip designers, process enginee...

    $90 / hr (Avg Bid)
    $90 / hr Avg Bid
    3 bids

    I am looking for an experienced PCB designer with intermediate level skills to help me with a project. The ideal candidate should have experience in designing mixed-signal PCBs and should be familiar with Microchip or Xilinx FPGAs. Requirements for the project include: - Designing 4 simple PCBs - Integrating both digital and analog components on the PCBs - Proficiency in using Xilinx FPGAs Skills and experience required for this job: - Intermediate level PCB design - Experience with designing mixed-signal PCBs - Familiarity with Microchip or Xilinx FPGAs If you have the necessary skills and experience, please submit your proposal.

    $131 (Avg Bid)
    $131 Avg Bid
    21 bids

    i want to have code for board Atlys Spartan-6 FPGA this board have 2 hdmi input and 1 output i want to got input 2 source video in hdmi have same image and compare this video if there is any different between 2 hdmi hide this different with watermark and make output video to hdmi output

    $480 (Avg Bid)
    $480 Avg Bid
    10 bids

    I’m looking for help with developing an ASIC miner in order to increase mining speed. I have a budget of more than $1000 and I plan to use the ASIC miner as a proof of concept. I need someone with the capability to help me develop the newest technologies with high speeds and low power consumption that will meet my goals. This project will require the candidate to have extensive ASIC experience so I am looking for someone with a strong background in this area.

    $470 (Avg Bid)
    $470 Avg Bid
    4 bids